Product Description
Two-Way LCD Pager Car Alarm With Engine Starter (With password to unlock door function)
MODEL CODE: WH868-23B

Features:
1. arm/disarm, lock/unlock remotely
2. Mute alarm ON/OFF; Foot brake to lock afrer driving;
3. Auto Door to lock/unlock(Alert ON/Alert OFF)automatically;
4. sound and light alarming when system is triggered ( when car is stroke/broken/ being stolen)
5. Door Open alert
6. LED light indication
7. Anti-hijacker to secure owner;
8. Owner Caller to find the owner;
9. Alarm not read indicating
10. Query function ( LCD pager show currect status of the vehicle when queried, also it can be used as vehicle locating function in parkinglot.
11. Low battery indication
12. Lock/Unlock after driving
13. Warning if the door doesn't work
14. Auto indication when wrong operation
15. More optimized wiring for easy installation;
16. Code learning for extra pager.
17. Central door locking reaction timing setting ( 0.8 seconds for electronic lock or 4 seconds for vacuum lock8
19. Turbo (short run) protection

Special Features:
16. Engine Starter to start the vehicle remotely;
17. Pre-engage engine starter;
18. Password to unlock door even without pager;
19. Trunk release remotely;
20. Emergency release manual switch (for disarming when pager is lost or damaged)

Components
1 x main brain
2 x two way pagers
1 x antenna
1 x owner caller
1 x shock sensor
1 x led indication light
1 x waterproof horn
1 x immobolizing relay
1 x Starter module
1 x knock here sticker
1 x 12-pin wire connector primary harness
1 x 10-pin wire harness for ignition and engine connection
1 x 4-pin wire harness for owner caller
1 x 2-pin wire harness for emergency release switch
1 x 3-pin wire harness for shock sensor
2 x AAA batteries
1 x Operation and installation manual
1 x nylon buckle

Technical Parameters:
Main Brain:
Working Voltage: DC12V +/- 3V
Static Current: ¡Ü20mA
Output Current: Parking light 5A, siren 10A, central lock 10A

Pager:
Valid Control Range: up to 1200 meters in diameter in open area,
or up to 600 meters in semidiameter.
Working Voltage: DC1.5V~3V
Working Current: ¡Ü50uA

Shock Sensor:
Working Voltage: DC12v +/- 3V
Static Current: ¡Ü1mA

Owner Caller:
Working Voltage: DC12V +/- 3V
Static Current: ¡Ü3 mA