Earth auger
Petrol Earth drill
Tiller
Driller
Item: PN4900
Engine: Two-stroke, air-cooled, gasoline engine.
Transmission: Automatic Centrifugal clutch
Displacement: 49cc
Rated Output Power: 1.47kw
Fuel Mixture Ration: Gasoline25: Two-cycle oil 1
Drilling Rotational Speed: 210rpm
Blade Diameter: 200mm
Engine Net Weight: 9.5kgs
Drill Net Weight: 4.3kgs
Material of drill head: Horniness alloy
Material of drill: Steel
CE Certificate
Packing:
Engine: 62*40*30cm, Drill: 80*21*21cm

When starting a new post hole, drill about 3" deep, then shut off and remove all clumps of sod from the auger teeth. This sod will prevent the auger from digging properly. Place the auger back in the hole and proceed, about every 10" to 12" you should release the throttle and pull it out of the hole and tap the auger on the ground to remove the dirt from you hole. Repeat this process until desired depth is reached. Do not remove or replace a rotating auger from or into an existing hole, always make sure the auger has stopped, doing so can cause you to loose control of the post hole drill. And as with any power equipment the owners manual should be completely read and understood prior to using your post hole drill.