Car Seat Cool and Heater

Product Description

1 Composition
Four heating pads, and a wire with a controller.
2 Installation
(1)First, take off the suit of the seat, then put the pads on the back and bottom of the seat, make them durable.
(2)Connect the plugins of the pads with the controller under the seat after the pads are ready.
(3)Put the wire at the corner of the ground, connnect the switch first then connect the red line and black line and yellow line to the power supply.
(4)Find a proper place between speaker and handbrake, make a hole, the diameter of the hole could not be bigger than the diameter of the switch, if not the may be not stable, you can put some glue in the hole to make it stable.
(5)After the switch is ready, connect the switch to the four core plug-ins of the wire.
(6)You can connect to the power supply now. First, connect the black line to the ground line, if there is a screw nut on the car and there is paint on it, you should cut off the paint first then connect the black line under the nut, it will be poor contact if you do not cut off the paint. Then you can connnect the red line, find a line which can transmit at least 10A current under the dashboard, when the car is not working there should be no current, you can also connect to the fuse which can transmit at least 10A current and the diameter is at least 1.5mm. How to find the line, use a multimeter to test, when the car is working there should be at least 12V, when the car is not working there should be no voltage. Connect the yellow line to the On-line.
(7)Some point to pay attention: The carbon fiber in the pads should not meet the metal part, you can use mackintosh to separate them.
3 How to use
(1)There are five levels of the switch: 51 degrees celsius(123.8 Fahrenheit) 47 degrees celsius(116.6 Fahrenheit) 43 degrees celsius(109.4 Fahrenheit) 40 degrees celsius(104 Fahrenheit) 36 degrees celsius(96.8 Fahrenheit).
(2)One switch could controll two seats.
(3)If there is only one person in the car, then only the driver's is working. Press one time the red light is up, press the second time the yellow light is up, for the third time the green light is up, for the fourth time the red light is flashing, for the fifth time the green light flashing, for the sixth time it will be turned off and the light is off. These six level means six temperature, from high to low. When you are first time to start the car in the morning, press the button once, the red light is up means the higheas level, if you feel it is too hot you can choose a proper level.
(4)If you want the two seats working just press the button for three seconds, the yellow light will flash for couple times, that means the co-pilot's seat is start to heat too, the temperature is the same with the driver's seat. If someone is midway aboard, just press the button for three seconds, the yellow light flash for couple times, then the co-pilot's seat start to heat and it will find a proper temperature. Nomatter whether there is some at the co-pilot's seat just press the button for three seconds the seat will start to work.
(5)There are two way to turn it off. First, just stop the car. If only the driver's seat is working put the level at when the green light is flashing then press one more time it will stop heating. Second press the button for three seconds.
4 his product is easy to install, easy to use, could controll two seats by one controller and have five levels.