Anti-Fog For Mirror (YJF)

Product Description

The same thing will be happen after every bath, you ready to shave and dressing, but you can't do because you can't see yourself in the mirror. The only reason is that there is much fog in surface of mirror.

No effect scrubing; Wast time blowing.

The newly YJF No-Fog TM can settle all this trouble. The system can keep clear and nofog automaticly if you install the element back the mirror, and connect the switch together with light or releasing system in the bathroom. The obvious virtue is that the power is only 6w, less than the common light.

Istallation manual

Your new mirror fogfree should be installed behind the mirror in bathroom. And located so that all of people in your fammily can make best use of it, shining, dressing and other daily activities.

Mark the wall with the location where you will be installing the element, the width and height of the element itself will vary depending on which FogFree model you purchased. (If an existiny mirror is already in place, remove it so that you can pencil in the location on your wall ). Then remove release paper from the back of the FogFree element and press the adhesive underneath to wall. This will hold the element in place while you make the dectrical connections.
The FogFree elelment will now activate whenever the lights are turned on, ready to keep fog away. Since using the same power with lights in bathroom.

Working theory:
Installed back the mirror, it can connect the lamp energy to heater, then sent it to surface of mirror with special power, comfortable temperature on the surface, it can prevent the steamer onto mirror's surface. It is unique style and convenient using.

Special function
The product is lightly and good intensity with 5mm thickness, and can be used repeatedly
It is safe, and generalize resisting water resisting fog and safe mirror. It will not leak electric even though in damp
It can achieve your unique design with its various style and plasticity summding in releasing fog
The installment is easy and convenient owning to its Sticky spot back

Note
1. Turn off electrical power at the service panel before performing the electrical installation portions of this installation
2. Check the fogfree element for damage before installation, don't cut or resize the heating unit
3. Don't use mirrors with cardboard backings. This reduce the efficiency of system
4. Must keep mirrors backing dry and dear
5. Don't cut or regular size of the fogfree