|
|
Optic Fiber Splice Protective Sleeve
| Offer Type: |
|
| Offer Post Time: |
2008-06-14 |
| Expiration Date: |
2008-12-05 |
| Details: |
Shrinkable sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing.
The sleeve can be divided into two types(sigle and mass) according to the function. The single type is used for the single-fiber, and the mass type is used for the ribbon fiber. It is different in the reinforcement between two types. The single one realizes the reinforcement by the stainless steel needles, the later one via the ceramic reinforcement member to realize the function.
Mass means there are several cores for the fiber. So the mass sleeve includes 4cores, 6cores, 8cores, 12cores(for types).
Mass type sleeve materials
Hotmelt adhesive
Ceramic reinforcement member
Heat shrinkable tube
Single type sleeve materials
Hotmelt adhesive
Heat shrinkable polyolefin
Stainless steel needle
Specification
Shrinking Temperature(C) 110 ~ 130
Radial Shrinking Rate (%) >50
Axial Shrinking Rate (%) <10
Low Temperature Property No crackle at -55C lasting 4 hours
Normal Operation Temperature(C) -40 ~ +60
Normal Operature Relative Humidity d95%
Spark-over Strength (kV/mm) e20
Tensile Strength (Mpa) 20
Loss at -40C 0.03dB
Loss at +60C RH95% 0.01dB
Type Remark
1-FCST 60 mm long, for single fiber, single stainless steel reinforcing bar
4-FCST 40 mm long, for 4 fibers ribbon, double ceramic reinforcing bars
6-FCST 40 mm long, for 6 fibers ribbon, double ceramic reinforcing bars
8-FCST 40 mm long, for 8 fibers ribbon, double ceramic reinforcing bars
12-FCST40 mm long, for 12 fibers ribbon, double ceramic reinforcing bars |
|
