Spraying Method · Good Mechanical Strength · Powder
High Quality High Temperature Lining Alumina Sprayed Mass Refractory Cement Castable Powder Material
US$ 120-300
/ Ton
10 Tons (MOQ)
10 Tons (MOQ)
Product Introduction 1.Technical specification of anhydrous taphole mud Type with index Volume Density ( G/ cm³ ) Compressive Strength ( Mpa ) Linear Change Rate ( %) Chemical Composition ( % ) 300ºCx24h 300ºCx24h 1100ºCx24h 300ºCx24h Al2O3 SiC FC XJ-WN1 ≥1.7 ≥5.0 ≥9.0 ±0.5 ≥45 ≥20 ≥4.0 XJ-WN2 ≥1.65
High-Alumina · Sintering Method · Good Mechanical Strength
Refractory Wear-Resistant Neutral Ramming Mixes for Induction Furnace Charging Port Lining Resisting Abrasion From Raw Materials
1 Ton (MOQ)
Product Description
Neutral ramming mass
Neutral ramming mass (not contain chromium) :
The neutral packing material in the medium-frequency furnace has excellent resistance to erosion by molten steel and slag, as well as resistance to erosion and scouring. The sintered layer is dense, with a lo
- ZHENGZHOU KINGSTONE REFRACTORY CO., ...
-
- Henan, China
- Contact Now
Low Thermal Conductivity · Good Mechanical Strength · Powder
Low Thermal Expansion Industrial Andalusite Raw Material for Boiler Incinerator Linings
US$ 190-310
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description
Andalusite has a high refractoriness, the highest refractoriness up to 1800 above, and has good thermal shock resistance, large mechanical strength, but also has a low thermal conductivity, from coarse to fine different particles of natural single crystal structure and other
- Zibo Thermaxcel Co., Ltd.
-
- Shandong, China
- Start Order Contact Now
High-Alumina · Sintering Method · Good Mechanical Strength
Manufacturer Unshaped Refractory Gunning Mass High-Strength Alumina Gunning Mix Refractory Material for Repairing Kiln
US$ 200-350
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
1700C heat resistant refractory gunning materials low cement castable magnesia gunning mix
The gunning mix is composed of refractory aggregate, refractory powder, water, binder, mineralizer, plasticizer, and firing aid. It is a fire-resistant mixture constructed by spraying method.
The materia
- ZHENGZHOU RONGSHENG REFRACTORY CO., ...
-
5(4.0)
"Nice Customer Service"Nice Customer Service - Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Contact Now
Low Thermal Conductivity · Good Mechanical Strength · Powder
Ultra Stable Aggregate Andalusite Raw Material for Blast Furnace and Coke Oven Linings
US$ 190-310
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description
Andalusite has a high refractoriness, the highest refractoriness up to 1800 above, and has good thermal shock resistance, large mechanical strength, but also has a low thermal conductivity, from coarse to fine different particles of natural single crystal structure and other
- Zibo Thermaxcel Co., Ltd.
-
- Shandong, China
- Start Order Contact Now
Spraying Method · Good Mechanical Strength · Powder
Refractory Material Netural Dry Furnace Lining for Wear Resistant Steel
US$ 120-300
/ Ton
10 Tons (MOQ)
10 Tons (MOQ)
Product Introduction 1.Technical specification of anhydrous taphole mud Type with index Volume Density ( G/ cm³ ) Compressive Strength ( Mpa ) Linear Change Rate ( %) Chemical Composition ( % ) 300ºCx24h 300ºCx24h 1100ºCx24h 300ºCx24h Al2O3 SiC FC XJ-WN1 ≥1.7 ≥5.0 ≥9.0 ±0.5 ≥45 ≥20 ≥4.0 XJ-WN2 ≥1.65
High-Alumina · Casting Method · Good Mechanical Strength
High Strength Refractory Material Wear Resistance Gunning Mix Converters Induction Furnace Lining
US$ 660-880
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description
Ramming mass is granule or powder shape material made from refractory raw material, usually, there are some proportion of binder, after rational gradation and tempering, loose amorphous ramming mass is produced. It is similar to dry-hardened castable, but some ramming mass doesn
- LUOYANG SHENGJIE NEW MATERIALS CO., LTD
-
- Henan, China
- ISO9001:2015, ISO45001:2018
- Start Order Contact Now
Low Thermal Conductivity · Good Mechanical Strength · Powder
High Temperature Alumina Steel Fiber Insulation Building Lining Planetary Mixer Material Gunning Plastic Low Cement Insulating Refractory Monolithic Castable
US$ 100-500
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description
Laurel Conventional dense castable is mixed by high-quality bauxite, flint clay as aggregate, Silica Powder, α-alumina powder as micro powder, and refractory cement as a binder. Formulas are changed according to different applications.
Product Parameters
Low Thermal Conductivity · Good Mechanical Strength · Powder
High Temperature Alumina Insulation Building Lining Silica Mending Material Converter Gunning Plastic Low Cement Insulating Refractory Monolithic Castable
US$ 100-500
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description
Laurel Conventional dense castable is mixed by high-quality bauxite, flint clay as aggregate, Silica Powder, α-alumina powder as micro powder, and refractory cement as a binder. Formulas are changed according to different applications.
Product Parameters
Casting Method · 1580< Refractoriness< 1770 · High-Temperature Resistant
Refractory Lining Mortar Material High Alumina Refractory Castable for Oven Kiln Furnace
US$ 300-500
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Introduction: Low cement castable is the castable whose CaO content less than 3%, usually the refractory cement dosage is from 3-8%, but high grade cement is needed to ensure the strength of the castable. Comparing to common refractory castable, low cement castable has better performance in high tem
-
How do wholesale prices of Refractory Lining Alumina Refractory Material compare across major distributors?
Wholesale price comparison for Refractory Lining Alumina Refractory Material shows top distributors and factory buyers have price advantages, especially for OEM or custom projects. Check market trends and request a price quote for your application—contact us to secure the best rates now.
-
What’s included in an OEM custom Refractory Lining Alumina Refractory Material order?
OEM Refractory Lining Alumina Refractory Material orders allow specs like density and format customization. When ordering direct from the factory or distributor, you access bulk prices, current market trends, and tailored fittings. Inquire now for custom guides and factory-generated price estimates.
-
Are there current trends in the distribution of cheap Refractory Lining Alumina Refractory Materials?
Yes—cheap Refractory Lining Alumina Refractory Material trends include rising demand for factory-direct and OEM distribution. Distributors highlight energy efficiency and competitive price options. Request a wholesale quote or guide to find top suppliers and maximize your budget.
1580< Refractoriness< 1770
Refractory Price Steel Furnace Lining Material Brown Fused Alumina Big Density
US$ 680-700
/ Ton
5 Tons (MOQ)
5 Tons (MOQ)
Refractory Price Steel Furnace Lining Material Brown Fused Alumina Big density
Product display:
Brown fused alumina is bauxite as the main raw material, adding coke (anthracite), iron and other auxiliary materials, in the arc furnace by high temperature smelting, with high purity, good crystall
- Liaocheng Century Dongrun New Materials Co., ...
-
- Shandong, China
- Contact Now
1770< Refractoriness< 2000 · Powder
Lining Sk34 Brick Factory Glass Furnace White Fused Alumina Refractory Brick Material White Corundum
US$ 620-650
/ Ton
5 Tons (MOQ)
5 Tons (MOQ)
Product Description
Lining sk34 Brick Factory Glass Furnace White Fused Alumina Refractory Brick Material White Corundum
White fused alumina is produced by bayer alumina in an electric arc furnace at high temperatures. The product shows higher hardness and lower toughness than that of brown alu
- Liaocheng Century Dongrun New Materials Co., ...
-
- Shandong, China
- Contact Now
High-Alumina · Casting Method · Good Mechanical Strength
Wholesale Lining Refractory Material High Aluminum Castable Refractory Plastic
US$ 599-699
/ Ton
3 Tons (MOQ)
3 Tons (MOQ)
Product Description Product Parameters Product Name Mullite Castable High Strength Mullite Castable PA-Corundum Mullite Castable Silicon Carbide Crusting-resistant Castable High Performance Wear-resistant Castable High Performance Wear-resistant Castable High Alumina High Strength Castable High Stre
- LUOYANG SHENGJIE NEW MATERIALS CO., LTD
-
- Henan, China
- ISO9001:2015, ISO45001:2018
- Start Order Contact Now
Clay · Extrusion Method · Good Mechanical Strength
High Temp Refractory Linings or Heat-Insulating Materials Lightweight Mullite Refractory for Furnace
US$ 480-558
/ Ton
5 Tons (MOQ)
5 Tons (MOQ)
Product Description The bulk density of JM series lightweight heat-insulating brick is 0.6~1.25g/cm3. Working temperatures range from 1300ºC to 1600ºC . Each grade of products has unique design to meet different thermal, physical and chemical demands.GM series lightweight heat-insulating bricks are
- Zibo Jucos Co., Ltd.
-
- Shandong, China
- Contact Now
Casting Method · Good Mechanical Strength · Powder
Good Resistance Refractory Material Permanent Layer Castable Used in Blast Furnace
US$ 200-980
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description Castable (1) Features: Monolithic structure, excellent high-temperature stability, and superior mechanical properties. (2) Application: Serves as a permanent backup lining in thermal equipment such as ladles, tundishes, and heating furnaces, providing solid support and protection
- Luoyang Zhongwei Metallurgical Material ...
-
- Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
Casting Method · Good Mechanical Strength · Powder
Carbon Powder Refractory Material Permanent Layer Castable Used in Blast Furnace
US$ 200-980
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description Castable (1) Features: Monolithic structure, excellent high-temperature stability, and superior mechanical properties. (2) Application: Serves as a permanent backup lining in thermal equipment such as ladles, tundishes, and heating furnaces, providing solid support and protection
- Luoyang Zhongwei Metallurgical Material ...
-
- Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
1580< Refractoriness< 1770 · Casting Method · Powder
High-Quality Manufacturer Supply Refractory Castable Material for Industry
US$ 200-980
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description PERMANENT LINING CASTABLE REFRACTORY Upgrade your industrial furnace safety and efficiency with Permanent Lining Castable Refractory—also known as Permanent Lining Castables, Long-Life Lining Castable, or Refractory Permanent Lining Castable. Formulated with high-purity industria
- Luoyang Zhongwei Metallurgical Material ...
-
- Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
Extrusion Method · High-Temperature Resistant · Brick
Ss430 Ss446 Refractory Lining Material Metal Fiber for Imperial Smelting Furnace
US$ 1800-1880
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
The raw material is stainless steel ingots, using electric stoves which melt the stainless steel ingots to become 1500 ~ 1600 ºC steel liquid, and then with a grooved high speed rotating melt-extracting steel wheel which produces wires that meets are our customers' specific requirements.
- Hengyang Steel Fiber Co., Limited
-
- Hunan, China
- Start Order Contact Now
Casting Method · Good Mechanical Strength · Powder
Premium Castable Refractory Materials for Industrial Kilns and Furnaces
US$ 350-468
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description Castable (1) Features: Monolithic structure, excellent high-temperature stability, and superior mechanical properties. (2) Application: Serves as a permanent backup lining in thermal equipment such as ladles, tundishes, and heating furnaces, providing solid support and protection
- Luoyang Zhongwei Metallurgical Material ...
-
- Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
Casting Method · Good Mechanical Strength · Powder
High Alumina Castable Refractory Material for Blast Furnace
US$ 681-880
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description Castable (1) Features: Monolithic structure, excellent high-temperature stability, and superior mechanical properties. (2) Application: Serves as a permanent backup lining in thermal equipment such as ladles, tundishes, and heating furnaces, providing solid support and protection
- Luoyang Zhongwei Metallurgical Material ...
-
- Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
Casting Method · Good Mechanical Strength · Powder
High Alumina Castable Refractory Material Permanent Layer Castable Used in Blast Furnace
US$ 200-980
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description Castable (1) Features: Monolithic structure, excellent high-temperature stability, and superior mechanical properties. (2) Application: Serves as a permanent backup lining in thermal equipment such as ladles, tundishes, and heating furnaces, providing solid support and protection
- Luoyang Zhongwei Metallurgical Material ...
-
- Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
High-Alumina · Sintering Method · Good Mechanical Strength
Refractory Unshaped Neutral Ramming Refractory Material for Furnace Repair & Lining, Easy to Patch & Maintain Refractory Products
1 Ton (MOQ)
Product Description
Neutral ramming mass
Neutral ramming mass (not contain chromium) :
The neutral packing material in the medium-frequency furnace has excellent resistance to erosion by molten steel and slag, as well as resistance to erosion and scouring. The sintered layer is dense, with a lo
- ZHENGZHOU KINGSTONE REFRACTORY CO., ...
-
- Henan, China
- Contact Now
Powder · 1580< Refractoriness< 1770 · Steel Industry
Refractory Lining Material for Smelting Alkaline Dry Furnace Lining
US$ 170-500
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description Alkaline Dry Furnace Lining Series This product series is primarily composed of high-purity, highly sinterable magnesia. It is suitable for smelting alkaline materials such as manganese steel, stainless steel, and high-manganese alloy steel in medium-frequency furnaces and other
- Luoyang Zhongwei Metallurgical Material ...
-
- Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
Energy Industry · Ceramic Industry · Steel Industry
High Strength Sealing Material for Industrial Furnace Lining
US$ 200-500
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description
Product Introduction:
High strength sealing material is a special functional coating designed for high-temperature industrial kilns. It is mainly used for the surface of tunnel kilns and shuttle kiln walls in the ceramic industry and the inner wall protection of kilns for pr
Powder · Steel Industry
Refractory Concrete Refractory Dry Ramming Masses Working Lining Materials
US$ 200-500
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description Dry ramming mass This series of products, primarily composed of alumina andmagnesia, are aluminum-rich spinel-type and are suitable formelting various carbon steels, manganese steels, wear-resistant steels, high-speed tool steels,stainless steels, and various alloy steels.The app
- Luoyang Zhongwei Metallurgical Material ...
-
- Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
Energy Industry · Glass Industry · Aerospace
Factory Supply Silica Refractory Ramming Mass Acid-Resistant Castable Acidic Kiln Lining Material for Medium Frequency Furnace
US$ 150-300
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Factory supply silica refractory ramming mass acid-resistant castable acidic kiln lining material for medium frequency furnace
Product Description
Acid Resistant Castable Introduction
Acid Resistant Castable is a kind of granulous and powder material made with certain content of bindingagent
- ZHENGZHOU RONGSHENG REFRACTORY CO., ...
-
5(4.0)
"Nice Customer Service"Nice Customer Service - Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
Energy Industry · Ceramic Industry · Steel Industry
High Strength Sealing Material for Kiln Furnace Lining
US$ 200-500
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description
Product Introduction:
High strength sealing material is a special functional coating designed for high-temperature industrial kilns. It is mainly used for the surface of tunnel kilns and shuttle kiln walls in the ceramic industry and the inner wall protection of kilns for pr
Energy Industry · Ceramic Industry · Steel Industry
Durable High Strength Sealing Material for Kiln and Industrial Furnace Lining
US$ 200-500
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description
Product Introduction:
High strength sealing material is a special functional coating designed for high-temperature industrial kilns. It is mainly used for the surface of tunnel kilns and shuttle kiln walls in the ceramic industry and the inner wall protection of kilns for pr
Powder · 1580< Refractoriness< 1770 · Steel Industry
Low-Dust Alkaline Dry Vibratable Material for Safer Working Environments
US$ 170-500
/ Ton
1 Ton (MOQ)
1 Ton (MOQ)
Product Description Alkaline Dry Furnace Lining Series This product series is primarily composed of high-purity, highly sinterable magnesia. It is suitable for smelting alkaline materials such as manganese steel, stainless steel, and high-manganese alloy steel in medium-frequency furnaces and other
- Luoyang Zhongwei Metallurgical Material ...
-
- Henan, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Start Order Contact Now
Sintering Method · 1580< Refractoriness< 1770 · High-Temperature Resistant
Cheap Alumina Refractory Brick Cement Industry Kiln Lining Material
US$ 400-780
/ Ton
25 Tons (MOQ)
25 Tons (MOQ)
Product Description
Product Introduction of KA40 Fireclay Brick, Refractory Chamotte Brick:
KA40 Fireclay Brick, Refractory Chamotte Bricks are made of 50% soft clay and 50% hard clay clinker, which are mixed according to certain particle size requirements. After molding and drying, they are fired
Haven't found what you want?
Product Alert
Subscribe to product alert and stay updated to what's new and popular on the market.