Latest COB Flat Lamp and Tunable Optical Flat Lamp 9 W

Latest COB flat lamp and tunable optical flat lamp 9 w

COB cross modulation characteristic:
1. High heat dissipation: COB(ChipOnBoard)Patent technology, low thermal resistance, high heat conductivity, using the low power chip packaging directly to thealuminum substrate fast heat dissipation, small chip area, high coolingefficiency, drive current is small. Under constant temperature condition tokeep around 70 ° Plate temperature, heat dissipation aluminum plate around 60° .
2. No glare eye protection: Professional design, no ghosting (deity), no glare, the light distribution of uniform soft, closerto the traditional lamps and lanterns.
3. Long life: Electric separation, satisfy the life 35000hours, product warranty 2 years.
4. High color rendering High CRI: Color rendering (CRI)reaches above 72.
5. Large flux: Light Angle 120 ° Of lamps and lanterns andlight source per watt 90 lm, or don't need the secondary optical design.
6. More selective: 3000 k to 4000 k, 5000 k, 6000 k fog surfaceand the surface of the transparent to choose from.
7. High guarantee: Using flat lamp dedicated power supply toensure the life of the product and efficiency (flat lamp dedicated powersupply, power factor > 95%, the efficiency of > 85, minimal error rate)
Generally speaking, the LED lighting need toinstall the spread sheet, on the one hand, to restrain glare, make the lightmore evenly on the other hand, but it will cause loss to smooth effect. We usethe COB light face broke through the traditional focus on the LED is notsuitable for indoor lighting, let us can also no obstacles into indoor lightinglamps and lanterns of areas.
Product Parameter:
Product standard
Producing area:
Shenzhen
Model:
HZT-1325
Measurement:
166mm*35mm
Working voltage:
AC 90-260V
LED light source:
COBarea source
Rate of work:
9W
Luminous flux:
800-850(LM)
Color Temperature:
2500K-9000K
Power-supply efficiency:
≥ 85%
Power factor:
PF≥ 0.95
CRI(color rendering index):
≥ 70
Irritation angle:
≥ 120degree
Useful life:
50000hour
Material of case:
Aluminum alloy + aluminum plate
Environment temperature:
-20~~+40centigrade
Environment humidity:
≤ 50%
Lamp holder interface:
OptionalG23/G24/E26/E27/B22
Power types:
Built-in power supply
Built-in power supply The lamps and lanterns of lamp holder can rotate 280 degrees, can adjust the Angle of irradiation. Eliminate the shortage of traditional lighting effect to waste. Direct without reflective, but to give up reliance on traditional reflectors quality stand or fall.
Flat lamp USES:
Mall, supermarket, bar, hotel decoration, household lighting, lamps light source, engineering lighting, parking lot, western restaurant, coffee shop, club, shop Windows, exhibition hall, art hall, museum and other home lighting business.
Matters need attention:
1. Cut off the power before installation to prevent electric shock!
2. The lamp should avoid installed in the heatsource and thermal steam, corrosive gas, lest affect life span.
3. Before installation to ensure that theinstallation position can take 10 times the weight of the product. In novibration, no swing, no fire hazard level ground.
4. Lamps and lanterns of the control system is designed byengineers working in the lamps and lanterns labeled under the condition of use, Or use typical color change effect work, Can achieve theoptimization of the LED life. Beyond the mark scope of work for a long time, Can make the LED into the life of a lower. In extreme cases, the internal light sourcecomponent failure will happen.