PBH15G Amorphous alloy Dry Type Transformer
|FOB Price:||US $100 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $100/ Piece|
|Payment Terms:||L/C, D/P|
Customer Question & Answer (0)
PBH15G Amorphous alloy Dry Type TransformerAADRT have the advantage of low loss, low noise, low temperature rise, strong overload, and high ability of anti short circuit, etc and can well relieve the fire protection work during urban power supply or consumption. AADRT is widely used in high buildings, commercial centers, airports, railway station, wharfs, subways, plants and underground substation.
PBH15G Amorphous Alloy Dry-type Transformer (AADRT)
Our 10kV AADRT have the advantage of low loss, low noise, low temperature rise, strong overload, and high ability of anti short circuit, etc and can well relieve the fire protection work during urban power supply or consumption. AADRT is widely used in high buildings, commercial centers, airports, railway station, wharfs, subways, plants and underground substation.
1. Safe hardy inflammable and no pollution, the transformer can be installed in load center.
2. High mechanical strength and powerful short-circuit bearing ability and the operation is safe and reliable.
3. Maintenance free, easy installation and low operation cost
4. Highly moisture proof, the transformer can operate normally under 100% relative humidity and can be switched on without pre-drying even after a longer period of service interruption.
5. Low losers, low partial discharge, low nose level and ideal dissipation of heat, the transformer can operate up 150% of its rated output by forced air cooling.
6. Precise temperature protection and surveillance system assures safe and reliable service of transformer
7. The notable feature of the amorphous alloys transformer is little loss on no-load and the economic load rate is relatively low.
8. Amorphous alloys transformers are the ideal equipment supplying power in three shifts industrial and mining enterprise which use their load in 50%- 80% range.
9. Amorphous alloys transformers can reduce transformer loss of the line load in the distribution network.
10. Amorphous alloys transformer can reduce the line loss rate of the large capacity transformer, it good for the distribution equipment reliable operation, also are energy and cost saving.
11. Amorphous alloys transformers is low power loss, fever less, low temperature rise, stable performance.
12. Amorphous alloys transformer with strong overloading ability, reliable safe operation, the capacity with corrosion resistant and free maintenance which widely used in national defense, basement, high-rise buildings and other places which requirements of uninterrupted power supply.
|Connection Symbol||Impedance Voltage (%)||No-load Loss|
|Note: The connection symbol marked with " *" is suitable for the transformer with rated power≤400KVA,|
Phase: 3 phase Insulates in heat resisting rank: F level
Frequency: 50Hz Winding average temperature rise: ≤100K
Partial discharge: ≤10Pc Noise level: Conforms to JB/T10088-2004
|Voltage rank kV||Equipment highest voltage effective values||Rated short time power frequency withstand voltage effective values KV/min||Rated lightning electromagnetic pulse withstand voltage full wave(Peak) KV|
Send your message to this supplier
Find Similar Products By Category
- Voltage Transformer
- China Transformer
- Transformer Power Supply
- Electronic Transformer
- Control Transformer
- Transformer Current
- Transformer For Power Supply
- Three Power Supply Transformer
- U Power Supply Transformer
- Supply Transformer
- Voltage Transformer Power Supply
- Electronic Power Supply Transformer