Normal High Efficiency Water Reducing Agent

The normal water reducing agent is a main component of aldol and ketone condensation, composite air entraining agent, retarder, plastic components, the product has obvious retarding effect before the initial congealing, after the final congealing, it has early strength effect and high enhancement effect, is the current domestic high strength, pumping, concrete admixture ideal.

1. The dosage of this product is 1.8%-2.5% of the amount of cementitious material, and the water reducing rate is 15%-26%.
2, compressive strength: 3d and 7d, the compressive strength increased by 10%---50%.
3, concrete work is good, adding this product concrete, is difficult of segregation and bleeding, no bottom, good pumpability.
5, slump loss is small, setting time can be adjusted.
6, keep the concrete slump no changed, save cement 12-16%.
7, this product is not include chlorine salt, no rust on the reinforcement.

Range of application

Concrete pumping agent can be widely used in the following concrete works: steam curing concrete, cast-in-place concrete, reinforced concrete, prefabricated components and high strength concrete.

How to use?
1, the product is liquid, after accurate measurement, can be directly put into the mixer and cement, and extend the mixing time of 1 minutes.
2, not obtain the best effect, suggest that the user in the initial use of this product or change cement varieties, according to the requirements of the project and specific conditions, with reference to the above instructions, make the necessary concrete test. In the construction process, the amount of concrete should be strictly controlled, and the slump requirement of concrete should be strictly controlled.


Packing and storage
1., this product can be packaged according to customer requirements.
2. store in a dry and ventilated place to prevent sun exposure

This product has been strictly tested before its production and conforms to the standard of concrete admixture.