0.8-1mm Ultrathin Graphite Plate for Battery Lead Plate, a Electrolysis Machine as Anode (JP10)

Material:

After two years Research and Development, we have successfully in producing the Graphite battery lead plate, which made by (Special processing high-purified graphitethen pass the carburizing treatment).

Feature:

We can machine the graphite plate to 0.8- 1.2 mm thickness, this sloved the problem of machine graphite material.

Performance:

This kind of Graphite battery lead plate can replace the traditional battery lead board, will be no pollution, small electric resistance, energy conservation, making the battery's electric capacity be improved, and can Reduce battery volume.

Test reports:

1. Electrical resistivity

Acceptable Resistivity - Resistivity is low enough not to cause appreciable volt drop.
Acceptable Current density -no deterioration due to electrolytic corrosion.

2. Immersion in water

Acceptable - no distortion or degradation because of ingress of water.

3. Robustness

After the carburizing treatment, this treatment will add more than three times of Modulus and tensile strength, and make the graphite plate not easy to broken, Such as we throw it from hight 1.8 m and to 4-6 m. That will have no any break.

Apply to battery 's VBAT and negative materials. This kind of battery Widely used in solar electrical energy generation, wind power generation equipment, electric automobile. etc