Power Transmission & Transformer

210,752 results for Power Transmission & Transformer

1250kVA 11kv Oil Immersed Distribution Transformer

US$5,000.00-50,000.00 / Piece
1 Piece  (MOQ)
1. Features of Products The three-phase oil Immersed distribution transformer applies new type insulating structure and make the short-circuit resistance strong. The Iron core is made of high qual

AC/DC Power Frequency High Voltage Tester Voltage Withstand Testing Transformer

US$500.00-2,000.00 / Piece
1 Piece  (MOQ)
Product Features: This product is special lightweight insulation withstand voltage test device, adopts advanced microelectronic processing technology, all the process can be set up in advance, touch

500kv Suspension Composite Insulator Polymer / Silicone Rubber Insulator

US$80.00-150.00 / Piece
10 Pieces  (MOQ)
Company files: Guangzhou MPC Power International Co., Ltd was established in 1997. This company covers an area of more than 90,000 square meters with a building area of 35,000 square meters. It is

2500kVA 13.8kv/415V-240V Pad Mounted Transformer American Type Transformer 60Hz Dyn11 or Yyn0

US$29,850.00 / Piece
1 Piece  (MOQ)
Shanghai People electric Industrial Co., Ltd. was founded in 2014 with a registered capital of 6 million yuan, located in Fengxian District, Shanghai, covering an area of 1000m2. We are specialized in

Low Loss 630kVA 800kVA Amorphous Alloy Transformer Core for Oil Immersed Transformer

US$2.80-3.30 / kg
10 kg  (MOQ)
Amorphous core Amorphous is a new type of soft magnetic alloy material, it adopts the international advanced ultra-cold technology will melt metal direct cooling at the rate of millions of degrees pe

Single Phase Oil-Immersed 35kv Voltage Transformer 35kv Rating PT

US$380.00-395.00 / sets
3 sets  (MOQ)
35kV voltage transformer/ oil-immersed transformer/ Single Phase Transformer JDJ(J)2-35 single phase oil-immersed 35kV voltage transformer 35kV voltage transformer/ oil-immersed transformer/ Single

S11-M 3 Phase 30-3150kVA Oil Immersed Distribution Transformer

US$2,000.00-10,000.00 / Piece
1 Piece  (MOQ)
Overview S(B)11/13/20/22-M Fully sealed oil immersed transformer Capacities from 100kVA to 10000kVA Product Description Features: Voltage level: 10~35/0.4kV Capacity: 30~3150kVA With

OEM 100kVA 3 Phase Buck and Boost Medium Voltage Dry Type Transformer with Copper/Wire Coil

US$1,073.00-1,268.00 / Piece
1 Piece  (MOQ)
Product Description Introduction of products. Dry type transformer has developed and further improved in the aspects of raw materials and technology by Po MING POWER,Compared to others in the indust

ANSI 54-1 High Voltage Porcelain Strain Insulator for Transmission Line

US$0.50-1.00 / Piece
500 Pieces  (MOQ)
Product introduction ANSI 54-1 High Voltage Porcelain Strain Insulator for Transmission Line Jiahong Insulators makes spool and strain insulators out of the highest grade electrical wet-process p

Painted Transformer Tanks with Radiator/Transformer Oil Tanks Rectangular Transformer Tanks

US$1,000.00-3,000.00 / Piece
10 Pieces  (MOQ)
Product Description Description: Painted Transformer Tanks with Radiators Material: Mild Steel (Q235B) or Corten Steel Finish: Painting (AkzoNobel International, CHING or PPG Transformer paint can

Optimal Energy Solution Indoor Long Life Power Distribution Dry Transformer

US$900.00-90,000.00 / Piece
1 Piece  (MOQ)
Detailed Photos ----Basic structure of dry-type transformer 1. Iron core: stacked by silicon steel sheet, is the magnetic circuit part of the transformer, used to guide the magnetic flux. 2. Wind

36kv 12.5kN 1400mm Composite Type Support Pin Insulator High Voltage Electrical Polymer Pin Post Insulator Silicone Rubber Line Post Type Insulater

US$4.00-35.00 / Piece
200 Pieces  (MOQ)
Product Description High Voltage Electrical Silicone Rubber Pin Line Post Insulator Insulator is used to suspend conductors and keep them insulated from towers and the earth, it is an important part o

10mm 15A Hall Effect Sensor Split Core AC DC Current Sensor

US$10.00-14.00 / Piece
10 Pieces  (MOQ)
10mm 15A Hall effect sensor Split core AC DC current sensor The ECS10 series are split-core Hall Current Sensor. For the electronic measurement of currents:DC,AC,pulsed,mixed,with a galvanic isolatio

1~1200kVA Single and Three Phase Dry Type Transformer

1 Piece  (MOQ)
Number of phases 3 or 1 Rated power 1-1000KVA(others on request) Primary/secondary voltage 220,230,380,400,600, 690V(others on request) Frequency 50,60,400Hz FAQ Q 1. What is the payment

Flat Wire Pq Core High Frequency Transformers for DC-DC Converter

US$0.50-0.55 / Piece
2000 Pieces  (MOQ)
Electrical characteristics (temperature: 25 ±50cm, RH: 65±1RH) 1) Inductance (at 10kHz 0.05V): L2-7 = L3-6 = 6.8mh +50%/-30% 2) Resistance: DCR2-7 = DCR3-6=250mΩ maximum 3) Hi-p

1000W/2000W/3000W/4000W/5000W/6000W Pure Sine Wave Power Inverter

US$130.00-135.00 / Piece
1 Piece  (MOQ)
Pure Sine Wave Power Inverter Features High efficiency conversion, powerful performance The higher the conversion efficiency, the longer the working time for the same capacity of batteries Red

10kv 6.3kv 6kv/0.4kv 1000kVA Three Phase Sc (B) 18 Energy Efficiency Gread2 Dry-Tape Transformer

US$12,000.00-21,450.00 / piece
1 piece  (MOQ)
10kv 6.3kv 6kv/0.4kv 1000KVA Three Phase SC(B)18 Dry-Tape Transformer Product Features 1.Due to its strong short-circuit resistance , low maintenance workload , high operating efficiency , s

CT with Split Core Diameter 36mm and 600A

US$8.00-8.90 / Piece
100 Pieces  (MOQ)
Model Current ratio Input Output Accuracy N/W H-CT005-36D 100A/50mA 100A 50mV 0.5Class 491G 200A/1.5A 200A 1.5A 0.5Class 200A/100mA 200A 100mA 0.5Class 250A/5A

Outdoor Medium Voltage 24kv Sf6 Pole Mounted Lbs Load Break Switch Disconnecting Switch

US$500.00-1,000.00 / Piece
1 Piece  (MOQ)
Our Advantages A. 25 years experience of production Medium voltage circuit breaker material B. 18 years for overseas market; you no worry for communication and save time C. IEC CNAS standard testin

Heyi Split Core Oct-45 Waterproof Current Transformer for Outdoor Use IP65

US$35.00-45.00 / Piece
3 Pieces  (MOQ)
Rated Primary Current(Amp.) 50/60Hz 100-1200A Current Ratio 400/5A D.C. Resistance Max at 20 ºC 0.1Ω Accuracy @RL<=10 Ω Class0.5 Burden 2.5VA IP Grade IP67 Bobbin PBT P

30 33 35 40 50 60 63 70 75 80 100 kVA 10kv 11kv 33kv S 0.4 Kv 400V Phase Three Step Down Car Charging Station Oil Immersed Distribution Power Transformer

US$1,308.00-1,408.00 / Piece
1 Piece  (MOQ)
Product Description The iron core of S11-M series low loss energy-saving transformer produced by our company adopts laminated structure. This product is based on fully absorbing the advanced technolo

Scbh15-M 10kv Amorphous Alloy Cast Resin Dry Transformer 50kVA~2500kVA

US$10,000.00 / Piece
1 Piece  (MOQ)
Shanghai Changji Electric Co., Ltd. is a professional enterprise specializing in the production of various reactors, power transformers, dry-type transformers, amorphous alloy transformers, special tr

Bp32 Disconnector Switch 31250 71250 Capacity Russia Type Isolator Knife Switch

US$6.00 / Piece
100 Pieces  (MOQ)
DESCRIPTION: BP32 isolating switch disconnector knife switch Russia type 400A 1.1 The rated voltage of the low-voltage series open type knife switch, conversion switch, and conversion switch (herein

High Voltage Polymeric Insulators for Transmission and Distribution Line

US$9.58 / Piece
5000 Pieces  (MOQ)
High voltage polymeric insulators for transmission and distribution line Type of products Our products cover 10KV-1100KV high-voltage and extra-high voltage hollow ceramic insulators. Which inclu

Gr 65 Power Transmission Pole 12m/40FT 800dan/8kn

US$100.00 / Piece
1 Piece  (MOQ)
Our Utility poles produced in accordance to ASCE/SEI 48-11, with a capacity reduction factor of 0.9 applied as per AS/NZS 7000. - Pole to be galvanized 100μm - penetration of circumferential weld

Ceramic Suspension Lec 120kN 33kv 70kN Anti-Foq Porcelain Insulator

US$4.90-7.00 / pieces
100 pieces  (MOQ)
Product Description What are the installation requirements for cable insulators Pay attention to the following aspects when installing cable insulators. First of all, choose the right type and specifi

S22 Series 11kv/15kv Class Oil Immersed Power Transformer Distribution Transformer

US$1,000.00-5,000.00 / Piece
1 Piece  (MOQ)
Product Description S22 series 11kV/15KV class S10 series fully sealed transformer.It introduces the new technology and adopts a fully ileld sealed type without oil storage cabinet.The transformer ch

110kv Anti-Fog Glass Insulators – Ideal for High-Humidity Areas Like Rainforests & Delta Regions

US$2.60 / Piece
500 Pieces  (MOQ)
Product Description Our glass insulators has ball and socket coupling,designed and tested according to IEC standard.Disc glass insulators are connected to make a string used on power lines,with one e

Lmzc-10 Inductive Current Transformer High Burden Protection Current Transformer for Series Inflatable Transformer Cabinet Dry Type Transformer

US$300.00-800.00 / Piece
100 Pieces  (MOQ)
Partial Product Parameter We support various customized transformers LMZC1-10 Primary Current Accuracy Class (measuring) Accuracy Class (protection) 0.2s 0.2 0.5 10P15 10P10 10P5 50 2.5 1 75 2.5 1.5 1

Ei-48 Silicon Steel Lamination for Transformers Electrical Steel

US$890.00-1,200.00 / Ton
1 Ton  (MOQ)
Introduction EI lamination is made by the silicon steel strip. The model of EI lamination in standard sizes is from EI-28 to EI-240, and the model of EI lamination in non-standard sizes is from EI-28
About Power Transmission & Transformer FAQ
  • QWhat materials are commonly used in power transmission and transformer manufacturing?

    Power transmission and transformer equipment are typically constructed using materials like copper, aluminum, and steel. A blend of these metals ensures strength, conductivity, and longevity in electrical systems. Consult with suppliers for specific material selections tailored to your project requirements.

  • QHow can I assess the efficiency of a Power Transmission & Transformer?

    Assess efficiency by examining the transformer's technical specifications for power loss levels during operation, including core and load losses, and by considering its impact on the overall energy consumption of the system. Transformers with high efficiency can reduce energy waste and lower operational costs.

  • QWhat advantages are there in manufacturing power transmission and transformers with a Chinese partner?

    Partnering with Chinese manufacturers for power transmission and transformers offers cost-efficiency, extensive industry expertise, and scale production capacity. Relying on their vast experience can improve product design, efficiency, and compliance with global standards, providing a competitive edge in the market.