Basic Info.
Working Principle
Electro-Acoustic Style
Alarm Volume (within 1m)
≥100dB
Receive Frequency
50Hz/60Hz
Product Description
Products description and applicationSpecial design for all kinds of engineering machinery (Mobile crane, crawler crane, overhead traveling crane etc.), Port machinery ( harbour cranes, gantry crane, etc) Material conveyor equipment such as belt conveyor.FeaturesThe products are sealed with structural glue, to ensure the good waterproof and dustproof of the product.
Super bright RGB, and the life is more than 100,000hrs. Lamp housing employs PC, providing good intensity, thermal stability and good finishing surface.
Special integrated core, providing strong electromagnetic antiinterference capability.
Industrial microchip design, integrated with a variety of tones, can choose the corresponding tone according to different venues, which can expand the application of the product.Specifications Rated voltage | DC18~48V/AC100~240V |
AC frequency | 50Hz ~ 60Hz | Rated power consumption | <45W |
Single tone/Dual tones | computer customization | Alarm mode | Acousto-optic synchronization sound and light separation |
Sound level | >120dB(max) | Volume adjustable | Yes |
Color | Red | Alarm mode | Audible visible synchronized / Audible visible separated |
Operating temperature | -30 ~ 55ºC | IP rate | IP65 |
Ambient humidity | 10% ~ 95% (non-condensing) | Weight | 3.0Kg |
Enclosure material | Aluminum alloy | Wring type | Cable gland M20(φ6-12.5) |
Installation and OperationThe alarm flare is mounted horizontally and the mounting surface should be flat and of sufficient mechanical strength.
Wall mounting: Use 4 M8 bolts, washers, spring washers and nuts to fix the mounting surface.
Wall mounting (with bracket): Take out the two brackets in the box, fix the bracket to the alarm as shown below, and then fix the alarm to the mounting surface.
Floor installation: Remove the 4 nuts, spring washers and flat washers at the red rubber feet, fix the alarm to the mounting surface, and fix the alarm with the removed fasteners.
Unscrew the 4 screws that secure the top cover and remove the top cover to expose the terminal block.
Connect the power control cable from the M20 stuffing box and connect the power control cable correctly according to the wiring diagram.
Check that the power supply and the alarm's rated voltage match, and check that the power cord is connected properly before power on.
Adjust the DIP switch to select different tones/voices. For the tone selection, refer to " one/Voice Selection ble".
Insert the 4 silicone plugs into the screw slots on the top cover.
Address:
Bldg 9, No. 1755 Wenbei Road, Jiading , Shanghai, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Lights & Lighting, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Since funded in 1990, NANHUA started to pay close attention to people who work in high-risk area. From the ports to mining machinery, from blower tower barrel to high-rise buildings, from the airport to the offshore platform, our research staff and sales personnel into the most demanding work environment, only to understand customer′s real needs, combined with signal, lighting and control technology, to develop a suitable products and provide satisfactory service.