Plastic Injection Mould 19L Paint Bucket Barrel Mold

Plastic bucket mold cooling system design: The design of the cooling system is a relatively complicated task, that is, the cooling effect and the uniformity of cooling must be considered, and the influence of the cooling system on the overall structure of the mold must be considered; for example: key parts such as moving mold 1. Cooling of inserts; design of cooling elements and selection of cooling standard elements. Sino mold began to analyze these series of problems during the design of the mold. The mold uses circulating water to flow in every part of the mold, reducing the cooling time during injection, improving the production efficiency of the product, and greatly reducing the production cost.
 

The structure of the plastic barrel mold: the mold adopts the I-shaped structure, the cavity and core are 2738, the slider, the guide chute, and the insert are 2316 or 718H, the guide post, guide sleeve, gate sleeve, pull rod, reset rod SKD standard parts are adopted, and the mold base adopts the self-made standard mold base. The corrosion resistance, toughness, thermal conductivity and hardness of good materials make polishing easier, which saves the production cycle, prolongs the life of the mold, reduces the maintenance and repair time, reduces the risk of cracking, and improves Productivity.