Basic Info.
Specification
aluminum structure
Product Description
1.Main features1) The design of double-sided experiment platform can satisfy two groups of students at the same time. The components, circuits and electrical control of the two sides are independently controlled, and the experiment is not interfered with each other.2) The modular structure design of structures, the experiment is simple, convenient, various pneumatic components into separate modules, with convenient installation plate, the experiment can freely on general aluminum plate, when assembling various experimental circuits, the operation is simple and convenient.3) Quick and reliable connection, easy installation and convenient connection.4) Standard industrial components, reliable edge and safety.5) The laboratory has a computer communication interface which can be controlled with PLC programming device;6) The gas source adopts the no-oil silent air compressor, which has the characteristics of low noise (< 55db). The gas is odorless and tasteless and clean and dry.7) Multiple control methods: single pneumatic control circuit, electric control pneumatic circuit with relay, PLC control pneumatic circuit, etc.2.Training workbench1) The experimental platform adopts double-sided structure, which effectively saves the laboratory land and has a high cost performance.2) The laboratory bench is made of high quality steel frame and high quality cold rolled steel.The lower part of the platform has components and tool-storage cabinets.The actual training screen is specially designed for the special belt "T", which can be easily and freely installed with pneumatic components and connected with the experimental circuit.Pneumatic and electro-pneumatic with double facefor 2 workstationseach bench is composed by stainless steel structure for mounting and must be provided fully equippedthe bench should be mounted on rollers and equipped with drawersequipment must be industrial gradeEquipped by:power supplypneumatic group composed by: pressure regulator, manometer, filter, cross connectnecessary tools for studying industrial pneumatic, electro-pneumatic and proportional electro-pneumatic3.Experiment list Basic pneumatic1) function demonstration experiment of common pneumatic components;2) common pneumatic circuit demonstration experiment:3) the commutation circuit of the single-acting cylinder4)The reverse circuit of the double acting cylinder5) the speed regulation loop of single-acting cylinder (one-way, two-way)The speed regulating circuit of inlet speed of double acting cylinder7) the speed regulating circuit of the speed adjustment of the two acting cylinder8) speed switching circuit9) the buffer circuit of parallel throttle valve is adopted10) interlocking loop11) overload protection loop12) unloading loop13) single cylinder continuous reciprocating control loop14) two - cylinder continuous reciprocating control loop15) use the cylinder sequence of the stroke valve16) double cylinder sequence action loop with electrical switch (magnetic switch, proximity switch)17) multi-cylinder sequential action loop18) two - cylinder synchronous motor loop19) secondary pressure control circuit20) high and low voltage conversion circuit21)Counting loop22) delay loop23) the hand operating circuit24) the application circuit of the valve25) or the application circuit of the door - type shuttle valve26) quick exhaust valve application circuitElectro pneumatic with PLC1) PLC instruction programming, trapezoidal programming learning2) the learning and use of PLC programming software(we supply free edition(free editon) software with unlimited users)3) PLC and computing communication, online debugging4) control experiment of PLC and pneumatic combination4.Components Basic pneumatic components for each bench :2 switch buttons 3/2, normally closed1 switch button 3/2, normally openpressure indicator with 2 colorsmanual selector 5/2push-pull button 3/2 normally closedroller operated valve 3/2 normally closed2 proximity sensors, pneumatic fixed on the actuator2 pneumatic temporizers, normally closedsequence valveunilateral 3/2 distributor, with pneumatic commandunilateral 5/2 distributor with pneumatic commandbi-lateral 5/2 bi-stable distributor, with pneumatic commandOR logic functionlogic functionfast evacuating valve2 unidirectional flow limiterssimple effect actuatordouble effect actuatorpressure filter-regulator with pressure supply distributorpressure regulator with manometer2 manometersair cross connect2 plastic hosespneumatic motorpneumatic sequencerBasic electro-pneumatic components for each bench:electric buttons moduleelectric relays moduletemporized relays moduleelectronic pre-selection counter moduleemergency stop buttoninductive proximity sensorcapacitive proximity sensordistributor terminalswing check valveelectro-distributor with LEDmanometerpressure supply distributor with filter pressure reducerPneumatic regulation components:electric buttons modulepush button normally closedproportional electro-distributor (5/3, …)electro-distributor with LED (5/3 normally closed, 3/2 normally closed, …)monometerunidirectional flow limiterpressure supply distributor with filter pressure reducerair cross connectplastic hoseslinear actuator, with guidance and all necessary accessoriesPID regulatorcomparison cardanalog pressure sensorpneumatic capacitorsstatus regulatorall necessary accessories for pneumatic regulation (potentiometer, damper, weight, …)PLC equipped at least by:24 VDC power supplyProcessor: 192 k bytes or better, memory 512 K bytes or betternetwork interfacing (Profinet, Ethernet, USB, …)16 digital inputs 24 VCC, potential separation LED light indication16 digital outputs 24 VCC, 0.5A with galvanic separation and protection against short circuit2 analog inputs2 analog outputsSupplied with Siemens S7-314CPLC:multi-users software teaching edition PLC programming including different languages(we supply free edition(free editon) software with unlimited users)connection PC-PLCspare parts setaccessories set:electrical wiresplastic hoseshoses connecting toolsspare parts of first usepractice activities manual bookinstruction book for the teacher including solutions for the practice activitiessilent air compressor with 30L, 8 bars minimummulti-users software for pneumatic and electromagnetic circuit simulation.
Address:
Building 14 No. 47 Peace Road, Jinan, Shandong, China
Business Type:
Trading Company
Business Range:
Office Supplies
Management System Certification:
ISO 9001
Company Introduction:
Shandong Airya Intelligent Technology Co., Ltd. Is a manufacturer and trader in the research, development, production and sale of didactic equipment. We are located in Jinan with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
We can supply first rate Products and Services to more than 100 countries in the world, Such as Thailand, Philippines, Korea, Japan, Malaysia, Indonesia, Dubai, USA, UK, Spain, Swiss, France etc.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.