Yc6b150dyuchai Diesel Generator 100kw

100KW diesel generator set of basic configuration and technical parameters
Manufacturer: Yangzhou Baifa Electrical Co., Ltd.
Configuration: Yuchai Power with famous brand "Baifa" Motor
Registered trademark: "a hundred" brand
Unit Structure:
The series diesel generator set mainly by the diesel engine, generator, cooling water tank, sensors, jointly mounted on a common chassis.
Conditions of use:
Not more than 2500 meters above sea level, the non-reducing power, ambient temperature: -25 ~ + 40 ºC, well ventilated indoor use, non-corrosive gases and non-conductive dust place.
A, 100KW diesel generator set of basic configurations:
water-cooled diesel engine
24V DC starter motor and alternator
mechanical governor
standard voltage 400 / 230V, 50HZ
fuel filters and oil filter, oil-water separator
oil drain valve
often contained air filter
accessory muffler (9 db)
random starting battery installation
using damping connection between the base and the engines and generators
operation and maintenance manual
Second, the engine specifications:
Third, Yuchai diesel engine YC6B150D
inline direct injection
Number of cylinders: 6 Cylinder
Engine type: Water-cooled, four-stroke
Aspiration: Turbocharged, intercooled
Features: two valves per cylinder, cast-cylinder crankshaft, cast iron body
Start System
24VCD negative ground
Generator rated current of 35 amps charging
When the ambient temperature is zero at start-up current 450 amps
Fuel System
Fuel pump with spin filter
Fuel pump with mechanical governor
With double fuel lines and fittings
Filters
Dry air with resistance indicator
Spin-on full flow oil filter
Cooling System
Standard 50-degree water tank
Oil cooler, drain valve
Third, the generator specifications
Generator Model: BF100-4
Rated power: 100KW
Rated current: 180A
Rated frequency: 50HZ
Rated voltage: 400V / 230V
Rated speed: 1500 / min
Power Factor: 0.8
Transmission: high elastic soft drive
Excitation mode: brushless excitation
Anti-falling objects design
H class insulation, protection class IP22
IC 01 cooling system
AC exciter and rotating rectifier unit
stator windings with epoxy coating
exciter rotor windings insulated oil and anti-acid treatment
rotor balancing test carried out in accordance with BS5625, the results meet the 2.5 maintenance-free bearings
motor's winding through moisture, oil, anti-acid triple treatment
output windings with 2/3 pitch winding, effectively improve the harmonic and parallel characteristics
Fourth, set technical parameters
Unit Model: GF-100
Standby Power: 100KW
Rated current: 180A
Rated frequency: 50HZ
Rated voltage: 400V / 230V
Rated speed: 1500 / min
Start: electric start
Connection mode: three-phase four-wire
Engine Model: YC6B150D
Number of cylinders: 6 Cylinder
Engine Type: Inline
Governor Type: Mechanical Governor
intake and cooling: booster
Bore: 150
start Minimum temperature: no auxiliary starting device / -25 ºC
net engine output - common: 112 KW
net engine output - Standby: 123KW
Fuel: common hourly 6Kg.
Oil Capacity: 24L
Coolant Capacity: 70kg
exhaust gas temperature 488 ºC
exhaust flow: 493 / min
Minimum inlet area: 1.85
Minimum exhaust area: 1.45
Dimensions (L × W × H): 2260 × 720 × 1200
Weight: 1000 kg
Five random attachment (a)
1. Diesel random parts of a box (including special tools and some consumable parts)
2.105AH type battery 2
3. Muffler 1 set
4. Diesel Manual 1 set
5. Manual 1 generator set
6. Warranty Services Information 1 set (service cards, technical service cards, resume)