Single Crystal Diamond Powder

Description of the model number

WO25-W60(W025 fine, W60 coarse model w is the national standard for diamond particle size can also be said to be the meaning of micron behind the number indicates the diameter of diamond particles, such as w3.5, indicates that the diameter of this model diamond particles is 3.5 microns, the smaller the number the finer, the larger the number, the thicker the description

At the same time, the corresponding mesh number behind is an international standard, the higher the mesh number, the finer, the lower the mesh number, the thicker! Such as 80,000 mesh is fine
 

Instructions on weight

Diamond powder (also known as artificial diamond powder) weight unit is carat (abbreviated as ct)

5 carats =1 gram 100 carats = 20 grams 2500 carats is one kilogram 5000 carats is one kilogram
 

Model selection instructions
(1)W0.5.W1,W15,W25,W35 these 5 models are very thin, suitable for the smooth surface of jade, jade, metal fine polishing. Normal jade, jade, bracelets and other items only use W3.5 to achieve the near-mirror effect, if continue to w1,5 fine grinding, then completely reach the mirror:

Normal tools and other metal smooth surface with W2.5 can achieve close to the mirror effect, if combined with W1 fine polishing, then completely reach the mirror

effect

(2)W5.W7.W10 is relatively fine, glass polishing light choose W5, ceramic with W7. These 3 models are also suitable for rough casting of less smooth jade, jade, metal surfaces.

(3)W14.W20,W28 these three models are relatively thick, suitable for jade, jade, metal rough surface grinding

(4)W40, w50 about 400 mesh is mainly used for carbide materials such as valves, valves, gear grinding than w50 again coarse belongs to granular diamond, the factory coarse to 50 mesh.