Basic Info.
Certification
Ce Certification
Transport Package
Wooden Case
Specification
https://wholesaler.alibaba.com/product-detail/King
Origin
Guangdong, China (Mainland)
Product Description
| Prodcut Description |
| Working principle of SLA |
| SLA process is the most studied,the most advanced and the most widely used method of rapid prototyping in the world (also the rapid prototyping method adopted by our company).SLA technology is the principle of conputer-controlled laser beam scanning on the surface of the photosensitive resin material point by point.The thin resin layer (about a few tenths of a millimeter) in the scanned area produces photopolymerization reaction,which solidifies to form a thin layer of the part.The table down a layer of thickness so that the surface of solidified resin is coated with a new layer of liquid resin.The next layer is scanned and repeated until the whole prototype is finished.Since the photopolymerization is based on light rather than heat,only lower power of laser source are needed at work. | |
| Comparision between SLA and FDM |
| | SLA | FDM |
| Print precision | can be as fine as 0.1mm,can process any complicated and delicate parts,or the prototypes and moulds which are difficult to be shaped by traditional methods | about 0.2mm,and it is difficult to manufacture complicated parts |
| Print size | Kings®3D printer maximum print size: 850 * 850 * 550,large-scale molds also do rapid prototyping | generally about 300*300*500,difficult to build large size complicated parts |
| Print speed | Kings®3D printer can reach 10m/s,processing speed is high,which shorten production cycle | the fastest printing speed is only 0.15m/s,prototyping speed is relatively slow,long production time |
| Printed materials | Multi-attribute photosensitive resin is available | Only supports ABS and PLA |
| Surface finish | smooth surface,thin wall structure can produce very fine details,post-processing is easy | feel layered by touching finished products |
| Introduction of equipment |
| SPECIFICATIONS OF JS 850-C INDUSTRIAL SLA 3D LASER PRINTER |
| Basic information |
| Construction Size | 850mm(X)850mm(Y)×550mm(Z) |
| Apparatus Size(without display): | 135cm(W)×146cm(L)×222cm(H) |
| Rated Dissipation | 1.8KVA |
| Apparatus Weight: | about 1380kg |
| LASER SYSTEM |
| Laser Type | Nd: YV04 Solid Laser |
| Wave Length | 355nm |
| Power | Minimum Power to Liquid Level≥300mW |
| COATING SYSTEM |
| Coating Mode | Intelligent Position Vacuum Recoating |
| Normal Layered Thickness | 0.1mm |
| Rapid Build Layered Thickness | 0.15mm |
| Precise Build Layered Thickness | 0.05mm |
| Special Build Layered Thickness | 0.05mm~0.20mm |
| OPTICAL & SCANNING SYSTEM |
| Light Spot(diameter @1/e2) | 0.10-0.15mm |
| Scanning Mode | Germanic Galvanometer Scanner |
| Parts Scannin Speed | Maximum 10.0m/s |
| ELEVATOR SYSTEM |
| Vertical Resolution Ratio | 0.0005mm |
| Repeat Positioning Accuracy | ±0.01mm |
| RESIN TANK |
| First TankWeight | about 70kg |
| Forming Material | Photosensitive Resin |
| Resin Heating Method | Bottom Heating with Silicone Rubber |
| CONTROL SOFTWARE |
| Machine Control Software | KING3D Control Software |
| Device Software Interface | 3D Design Software,STL File Format |
| SOFTWARE SYSTEM |
| Master Controller Operation System | Windows 7 |
| Network Type and Protocol | Ethernet,TCP/IP |
| INSTALLATION CONDITION |
| Current Source | 200-240VAC 50/60Hz, Single Phase,10A |
| Ambient Temperature | 20-26oC |
| Relative Humidity | <40%,Frost Free Knot |
Kings control software
You can monitor the printing progress,print time and print speed through the screen. |
Materials
Jinshi research and development of 3D printing materials in the international advanced level,including hard material,soft material,color material with high temperature resistance,high toughness,high strength,flexibility,transparency and other characteristics,to meet the different industries on the physical properties of 3D printing produtcs,so as to achieve the perfect final product presentation. |
Material properties table
| Name | Hardness shoer D | Tensile strength
(Mpa) | Tensile modulus
(Mpa) | Elongation break
(%) | Flexural strength
(Mpa) | Flexural modulus
(Mpa) | Izod impactnotched
(J/M) | Heat deflection temperature
(ºC) |
| 9400 | 83 | 27-31 | 2189-2395 | 12-20 | 69-74 | 2692-2775 | 58-70 | 50-60 |
| 2015T | 85 | 45-50 | 2500-3720 | 4-9 | 70-80 | 2400-2600 | 20-27 | 80-90 |
| lasty | 88 | 40-58 | 2511-2665 | 11-16 | 71-76 | 2495-2565 | 30-40 | 60-70 |
| YGH1001 | 82 | 50-58 | 2300-2500 | 15-25 | 60-70 | 2700-2950 | 25-35 | 85-95 |
| Kings 3D printer | Time | Maximum consumption of raw materials(Grams) |
| KINGS3053-C | 24H | 1200-1500 |
| KINGS4500-C | 24H | 1500-1800 |
| KINGS6035-C | 24H | 1500-1800 |
| KINGS6000-C | 24H | 1500-2200 |
| KINGS8000-C | 24H | 2500-3000 |
| KINGS7255-C | 24H | Doube laser 4500-6000 |
| KINGS8500-C | 24H | (sign laser 2500-3000) Doube4500-6000 |
Print accuracy
High precision,the size error of the product structure is ±0.1mm. |
Apperance
Smooth surface,delicate,structured. |
Post-processing
1. Remove the support structure
2. Industrial alcohol cleaning
3. Fine polished support structure parts |
Application area
Kings 3D series equipment not only is the first choice of rapid prototyping of car,building,light fixture,toys,mobile phone,medical,fashion,art and industry,but also a wise choice for shoe mold and other complex process of mold industries. |
Requirements of installation environment
1.Print workshop should be protected from light,using soft yellow light.
2.Workshop is clean and no dust.
3.The temperature (20-25°) standard is 23°,air humidity 35% -40%,keep ventilated.
4.The printer should far away from vibration source.
5.Voltage is 220V,air conditioning socket must use 16A,printer and oven must use 10A, must be ground wire.
6.Air conditioning requirements:10m2 output power 5000W,20m2 output power 7500 W,30m2 output power >7500W
7.The heat dissipation sheet metal hole remains unobstructed,exhaust fan cover must be covered.
8.The waste water of the dehumidifier must be drained outside the printing workshop,air conditioning and dehumidifier can not be facing the printer.
9.The washing alcohol is placed in the washing room and can not be in the same room as the printing workshop.
10.Photosensitive resin material should be used frequently.
Certification |
After-sale service and service instruction
1.1After-sales: We arrange our technical staff in 30 working days to provide global technical after-sales service.
1.2Services: Customers buy our equipment,we provide professional skills and are responsible for home installation and debugging,your company can send the relevant personnel to our company to train professional knowledge of equipment operation.
1.3Warranty: Equipment warranty 2 years. |
| Shenzhen Jinshi 3D Printing Technology Co.,Ltd. is a high-tech enterprise.We devote ourselves to providing professional solutions of rapid manufacturing for customers in various industries based on the 3D digital manufacturing technology through integrating professional resources worldwide in the field of rapid manufacturing.The services include the equipment in the area of rapid prototyping RP,rapid tool RT and reverse engineering RE,various professional rapid processing software,rapid manufacturing integration system,the research and development of rapid prototyping material photosensitive resin,the design and production of various types of rapid prototyping model. |
About payment
1.Shipping terms
FOB/EXW: 50% deposit inadvance,the balance should be paid before shipment.
2.Payment terms: T / T;Onetouch;international Alipay
|
| 3D printer | 1 | laser | 1 |
| scraper | 1 | Under the platform | 1 |
| UPS power supply | 1 | tool case | 1 |
| allen wrench | 1 | gloves | 1 |
| caliper | 1 | brush | 2 |
| thermometer | 1 | clip | 2 |
| UV curing tank | Optional | dehumidifier | Optional |
Package
Delivery method: by sea or by air
Delivey time: 30-45 days | |
1.Q : Are you a factory or a trading company?
A : We are a factory.
2.Q : What is your max size for CNC prototype and 3D printing?
A : For CNC machine,there is no max size but bigger
3D printing max size : 850mm*850mm*600mm.
3.Q : Can you do OEM customization?
A : Yes,we provide OEM services.
4.Q : How long will be your delivery time?
A : It's usual30-45days.Sometimes,it can be discussed and make an agreement between us.
5.Q : What information should I give for detailed quotation?
A : If you have drawings or samples,please feel free to send us,and tell us your special requirements such as material,processing technology and the amount etc.
6.Q : Do you only provide rapid prototyping service?
A : No,we can not only make prototype but also open molds,that means your order quantities can change from 1pc to a large quantity.
7.Q : How does your facility handle quality control?
A : quality is the most important
(1) all the raw materials we use are environmentally friendly;
(2) skilled workers care about every detail in the production and packaging process;
(3) quality control department is responsible for quality inspection. |
Packaging
| Selling Units: | Single item |
| Single package size: | 740X570X420 cm |
| Single gross weight: | 1250.0 KG |
| Package Type: | Bubble bag+ standard export carton / wooden box /according to customers' demand. |
Address:
No. 67 Houting No. 2 Industrial Area, Shajing Avenue, Bao′an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Company Introduction:
Shenzhen Jinshi 3D Printing Technology Co., Ltd. Is a high-tech enterprise which is at the forefront of 3D technology, and is committed to the market application of 3D printing technology. It provides efficient and efficient 3D printing integrated solution for enterprise businessmen.
As the leading brand of industrial grade 3D printer, Jinshi has 3D printing equipment and raw materials R&D and manufacturing base, and professional customized 3D printing service organization.
The laser 3D printer R&D by Jinshi is an industrial grade rapid prototyping equipment. It adopts the SLA light curing technology, a process of laser scanning liquid photosensitive resin to produce photosensitive reaction, and then solidify the molding layer by layer. Over the years, the Jinshi R&D of 3D printing equipment manufactured at home and abroad, helped thousands of enterprises.
Jinshi established strong marketing and service channels, not only have someone to conduct operation training, also the global market with the overseas maintenance specialist at any time to provide customers with the machine installation, debugging and maintenance of on-site service. As long as the customer has a call, we can arrive at the customers′ company within 24 hours to solve the problem.
Looking ahead, Jinshi will look at the world, strengthen talent planning and reserves, constantly updated to enhance product performance and quality, always walk in the forefront of 3D technology, become a respected social enterprise.
){kind=link}