Basic Info.
Function
Signal Transmitting Device, Signal Transmission Equipment, Signal Monitoring Equipment
Certification
CE, ISO, RoHS
Specification
134*157*45mm
Product Description
2 Channels XLR Balanced Audio Over Extender To XLR Audio Encoder Decoder
Product Description:
ETV-DT816804 is an audio codec device that can perform IP networking through a switch to complete pairwise audio interaction in a local area network. Industrial-grade chips are used to achieve technical bottlenecks such as adjustable audio bandwidth and adjustable audio delay on the basis of ensuring sound quality through the latest algorithms. It can cooperate with video distributed applications, and can also realize audio broadcast interaction independently, Easy to use and flexible in application.
Features:
1. This series of products are equipped with a high-speed processor, ultra-low delay, and can be used for microphone live sound reinforcement, which is not comparable to ordinary network microphones. For special applications, the delay is adjustable between 2.00-120.00ms, and the accuracy is 0.01ms.
2. This series supports two channels, up to 16 channels full-duplex network audio, two-way transmission of lossless audio.
3. Balanced input and output interface, can be set to unbalanced by software.
4. It can be connected to the switch/router, and the two modules can also be directly connected for automatic identification, which is convenient to use.
5. The main working modes are: point-to-point mutual transmission, grouping, group sending, broadcasting, paging, etc.
Note: Different working methods should use different group numbers, such as different point-to-point, different group numbers should be used, but the same Two point-to-point modules in a group should use the same group number. If the group number is wrong, or the IP is repeated, the modules will not work normally.
6. The paging or emergency fire function can be paging by IP, or by group, or by paging or broadcasting all.
7. User IO port, switch value function, two-way data transparent transmission function, need to contact technical instructions before delivery.
8. Equalization function, the module is equipped with standard 5-band EQ equalization function, some of which can be selected for high and low cuts, used for speakers, and need to be noted.
9. The software supports the virtual sound card function, which can monitor the sound of the module on the computer side. This is a paid function and is only free for some modules.
10. This series of modules have a wide range of applications, suitable for audio matrix, isolation, digital IP broadcasting, public broadcasting, digital conferences, simultaneous interpretation, and can also be installed in power amplifiers, mixers, audio preamps, peripherals... With wireless bridge, it can also form a wireless audio system...
11. POE network power amplifier version, with 50W+50W stereo power amplifier, single channel 100W. There are also 175w+175w, single channel 350w optional.
12. This module, only 6702-V4, size: 60*75mm.
13. Can be upgraded to support AES67 and Dante.
Product parameter:
Operating Voltage | DC 5~6V |
Working current | <120mA, professional version <150mA |
S/N Ratio/Dynamic Range | 102dB, professional version 114dB 4. Harmonic distortion: 0.003%, professional version 0.001% |
input resistance | 20kΩ |
Output impedance | 100Ω |
Maximum input level | 2.5Vpp |
Maximum output level | 2.5Vpp |
Gain | 0dB (EQ off), the maximum mic preamp is 20~60dB, the professional version has no mic preamp function |
EQ range | ±12dB, professional version without EQ function |
Delay | 2~120ms adjustable |
Sampling frequency | 48KHz ~ 96KHz |
Sampling accuracy | 16bit ~ 24bit |
Frequency response | 20Hz ~ 20kHz |
Address:
Room 402, Building 15, No. 738 Changliu Road, Machikou Town, Changping District, Beijing, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Service
Management System Certification:
ISO 9001
Company Introduction:
The predecessor of Beijing Yite Video Co., Ltd. Was established in 2006. At the beginning of its establishment, the company was mainly engaged in technology promotion services and sales of optical fiber communication products, audio and video equipment, etc. In March 2008, the company introduced capital technology, and its business was fully expanded in the field of communications. In 2009, it registered its own brand ETV. In September 2012, through a development approach that combined production operations and capital operations, the company′s business added high-definition digital video software, The research and development, product marketing and services of multimedia communications, optical fiber communications, network communications products and wireless image transmission technology provide professional and integrated solutions for industry users.