Danfoss Omm32 High Speed Low Torque Hydraulic Motor

OMM series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume, high power and low weigth.

Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.
OMM main specification:
Flange:
1)3-M6 Circle-flange, pilot Ø 31.5× 5;
2) 3-1/4-28UNF Circle flange, pilot Ø 31.5× 5;
3) 2-Ø 9 Rhomb-flange, pilot Ø 63× 2;

Shaft:
1)shaft Ø 16, parallel key 5× 5× 16;
2) Shaft Ø 15.875, parallel key 4.8× 4.8× 19.05;
3)Shaft Ø 16.5, involute B17× 14, DIN5482;

Ports and drain port:
1)G3/8, G1/8;
2)9/16-18UNF, 3/8-24UNF;
3)End port G3/8, G1/8;
4) End port 9/16-18UNF, 3/8-24UNF

Tips:
In order to make the motors working in optimal situation, we recommend the following:
1, oil temperature :normal 20°C~60°Cupper limit 90°C (no more than one hour).
2, The motors can be operated in parallel or in series. When the pressure of the back exceeds 2MPa,it is necessary to install an external drain line to the tank.
3, In order to obtain a longer life of operating motor should operate motors at first for one hour under 30% of rated pressure. In any case, be sure to fill up with hydraulic oil inside motor before increasing load.
Q: If the product fails during use, how to do?
A: please feel free to contact us, we will be the first time to help you solve the problem.
Characteristic features:
* Advanced manufacturing devices for the gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.