| Number of control axes: 4 axes (X,Z,Y,A) |
Number of linkage axes: 4 axes |
Feed shaft function | Minimum input increment: 0.001mm (0.0001inch) or 0.0001mm (0.00001inch) Optional |
Minimum instruction increment: 0.001mm (0.0001inch) or 0.0001mm (0.00001inch) Optional |
Large stroke: ±99999999 x minimum instruction increment |
Fast moving speed: maximum 60m/min |
Rapid rate: F0, 25%, 50%, 100% four levels of real-time adjustment |
Feed rate: 0 ~ 150%, a total of 16 levels of real-time adjustment |
Interpolation methods: linear interpolation, arc interpolation (support three-point arc interpolation), thread interpolation, rigid tapping |
Automatic chamfering function |
Thread function | Normal thread (follow spindle)/ rigid thread |
Single head/long head male inch straight thread, taper thread and end thread, equal pitch thread and variable pitch thread |
The length, Angle and speed characteristics of thread withdrawal can be set |
Thread pitch: 0.01mm to 500mm or 0.06 teeth/inch to 2540 teeth/inch |
Acceleration and deceleration function | Cutting feed: front acceleration and deceleration linear, front acceleration and deceleration S type, rear acceleration and deceleration linear, rear acceleration and deceleration exponential type |
Fast moving: front acceleration and deceleration linear, front acceleration and deceleration S, rear acceleration and deceleration linear, rear acceleration and deceleration exponential |
Thread cutting: linear, exponential optional |
The start speed, end speed and time of acceleration and deceleration are set by parameters |
Main function | 2 channels 0 ~ 10V analog voltage output, support dual spindle control |
1 way spindle encoder feedback, spindle encoder line number can be set (100p/r ~ 5000p/r) |
Transmission ratio between encoder and spindle :(1 ~ 255) (1 ~ 255) |
Spindle speed: can be given by S code or PLC signal, speed range 0r/min ~ 9999r/min |
Spindle ratio: 50% ~ 120%, a total of 8 grades of real-time adjustment |
Spindle constant line speed control |
Rigid tapping |
Function of cutting tool | Tool length compensation |
Tool tip radius compensation (Type C) |
Tool wear compensation |
Tool life management |
Knife setting method: fixed point knife setting, trial cutting knife setting, back reference point knife setting, automatic knife setting |
Tool deviation execution mode: modify coordinate mode, tool movement mode |
Precision compensation | Reverse clearance compensation |
Memory pitch error compensation |
The PLC function | Two-stage PLC program, up to 4700 steps, level 1 program refresh cycle 8ms |
PLC program communication download |
Support PLC warning and PLC alarm |
Support multiple PLC programs (up to 20), the current running PLC program can be selected |
Basic I/O: 36 input /36 output |
The man-machine interface | 8.4-inch widescreen LCD with 800×480 resolution |
Display in Chinese, English and other languages |
Two dimensional tool path display |
Real time clock |
Operation management | Operation mode: edit, automatic, input, machine zero back, hand wheel/single step, manual, program zero back |
Multi-level operation permission management |
Alarm log |
The program to edit | Program capacity: 56MB, 400 programs (including subroutines, macroprograms) |
Edit function: program/program segment/word search, modify, delete, copy, paste |
Program format: ISO code, support statement macro code programming, support relative coordinates, absolute coordinates and mixed coordinates programming |
Program call: support macro program call with parameters, 4 levels of nested subroutines |
Communications functions | RS232: parts program, parameters and other files two-way transmission, support PLC program, system software serial port upgrade |
USB: U disk file operation, support PLC program, system software U disk upgrade |
Safety features | Emergency stop |
Hardware travel limit |
Software trip check |
Data backup and recovery |
){kind=link}