5.8g Microwave/Radar Motion Sensor Light Lamp Switch Round Shape Doppler Effect AC Input 5A Output

Module :HFR-AC15
Theory:Doppler Effect
Frequency:5.8G±75M
Wave Band:ISM
Input:AC 185-240V
Output:5A Relay
Self-consumption: Static 0.96w  working 1.28w
Lamp Loading:≤200W
Self-testing for the first time: 8S
Connecting:L,N connecting with 220V input,L',N with loading
Installation Height:2-6m
Detective Range:The front Cone 360˚
Detective Distance:≥12m
Delay Time:2-120s
Light Sensitivity:Adjustable
Working Temperature: 10ºC~+60ºC
Lifespan: >16000h
Apply with the Safety Standard

 Application:
5A Relay output, suitable for all the lighting products in the market , but the loading Watt level is different as the different working ways of different lamps, such as Maximum Loading 1000w for the incandescent bulb, less than 200w for the led power supply which is capacitive or inductive load

Function Adjustment

Distance Adjustment:Adjusting the arrow clockwise to the upper left

corner for the maximum distance (≥ 12M), otherwise the nearest (≈0.5M ), the middle part can be adjusted freely (non-linear)

Time adjustment:Adjusting the arrow clockwise to the upper left

corner for the longest delay time (120s), otherwise the shortest(2s), the middle part can be adjusted freely (linear)

Light Controlling Adjustment: Adjusting the arrow to the upper left corner for the working mode of the whole day (no light controlling function), transferring to the upper right corner for the evening working mode


The Factory Test Standards:

Module finished with 220V voltage test to meet the following requirements:
 

Frequency:5.8G   ±75M

 

5 pcs 100w ordinary incandescents paralleling load ( load power 500W) work properly;

 

Put it on the side position with 1.5 m height, the front sensing distance is more than 12 m;

4, Working properly for three hours in the oven with 60 degrees (more than 30 times per hour triggered);

5, Working properly under the circumstances below minus 10 degrees for three hours (more than 30 times per hour triggered);



Operating Requirement:

1. the module is not suitable for putting together with any high-frequency

electronic equipment (within 30cm), keeping it from metal objects in its front side when working, vibration and any object with continuous action are forbidden within the its detective range , otherwise the continuous trigger would be caused by itself.

2,Being placed on a large area of metal objects or on the ground, the

embedded installation on the wall, All of them are likely to reduce the module sensing distance


Attention:

1, the product is featured by the connection of a set of hardware and software technology, it is not suggested to disassemble or change any of the inside components parameters randomly, if any requirement changed, please contact us in time.