Basic Info.
Application
Automation Equipment, Audio and Video Equipment, Moving Machinery
Function
Control, Driving
Structure
Electromagnetic
Transport Package
Carton Box
Product Description
Detailed Product Description
Voltage Range: | 2.4V Or Customized | Material: | Metal Gear High Precision Gear |
---|
Diameter: | 10mm | No Load Speed: | 65RPM |
---|
No Load Current: | 70mA | Rated Load Torque: | 425g.cm |
---|
Rated Load Speed: | 50RPM | Rated Load Current: | 250mA |
---|
Gear Ratio: | 250:1 |
---|
10mm 3V / 2.4V Metal Gear-box motor DC Gear Motor Low Noise and Large Torque High precision gear
DC Worm Gear-Box MotorDiameter : Φ10.0mmOutput : APPROX 0.1~1.0WNoise Level : Less than 50dBLow noise, stable performance, quality assurance
Typical Applications
Fully automatic electronic door lockOffice Automatic EquipmentsPrinter/paper FeederBank Equipments Safe BoxAd EquipmentAnalysis Instrument/electronicGame MachineHousehold AppliancesElectronic Door Lock
Specifications
The following specifications are only representative of one of our models. Other performance parameters can be customized according to customer requirements
MODEL | VOLTAGE | NO LOAD | AT MAXIMUM EFFICIENCY | STALL |
OPERATING RANGE | NOMINAL | SPEED | CURRENT | SPEED | CURRENT | TORQUE | OUTPUT | TORQUE | CURRENT |
r/min | A | r/min | A | mN.m | g.cm | w | mN.m | g.cm | A |
GM10F-M20VA-08130-100 | 2.0-3.5 | 3.0V | 150 | 0.055 | 115 | 0.180 | 16 | 170 | 0.540 | 70.0 | 700 | 0.55 |
GM10F-M20VA-10100-250 | 1.2-3.0 | 2.4V | 65 | 0.070 | 50 | 0.250 | 42.0 | 425 | 0.600 | 200.0 | 2000 | 0.75 |
| | | | | | | | | | | | |
Drawing
Product Details Show
General Instructions for Use of Woshine Precise Machinery Motors DO'S and DON'TS to keep your motors in order
If silicon materials, which contain low molecular silicon compound adhere to the motor's commentator, brush of other parts, then upon rectification of the electric energy the silicon breaks down into SiO2,SiC and other constituents which produce a rapid increase in the contact resistance between the commutator and brush. therefore great care should be taken when silicon material is used in a unit and check well at the same time that such binding agents or sealing materials are not generating gases of detrimental nature, whether used for motor mounting or applied during your product assembles. care must be taken for an optimum selection, especiallywhen using those of cyanic adhesive and sulfur gas.When mounting your motors by means of binding agents, DON'T flow any adhessice to the Bearings nor intrusion into the motors.Axial thrust on the output shaft could have an adverse effect on the motor life i.e... as is produced by worm gears, fans etc, check the service life expected under the actual operating conditions by testing the motors installed in your application products .for heavy thrust loads consider using something mechanical to retain the shaft end.There are occasions when the internal resistance of the motor driving power source (which contains an electrical circuit) can influence the life span of the motor. in instances where there is a low input of voltage to the motor, the internal resintance of The Power source is large which may well result in an inferior motor after a short time, conversely in instances where high cyclic voltage are applied, this internal resistance is small and the motor life span is shortened. when the temperature deviates from the normal room temperature as is the case in low and high temperature situations, please note the conditions.Motor life may be affected adversely by heavy radial load such as produced by rotating eccentric cams, etc., and also by vibration given from outside. Do check over such negative factors by testing the motors to the actual operating conditions in your application products.If when mounting the motor and assembling the unit, equipment which emits ultrasonic waves is used there is a danger that some of the internal parts of the motor might be damaged so please take care,DON'T store motors under environmental conditions of high temperature and extreme humidity. DON'T keep them also in an atmosphere where corrosive gas may be present, as it may result in mulfunction.Ambient and operating temperatures exert an affect more or less on motor performance and Do pay particular attention to the surroundings when it is hot and dampWhen press fitting a pulley, gear etc., onto the motor output shaft, always support the shaft from the other end on its retaining metal pad in a proper and correct way.When soldering, BE SURE to finish your work quickly so as not to develop plastic deformation around the motor terminals nor to give them any forced bend or inward depression. in doing deformation- special care must be taken not to allow solder debris and flux to spatter into motors and precaution measures should be taken if necessary, by covering up all the nearby holes and aperaures. Any motors having snap in terminals must also be attended carefully so as not to get flux in along the terminals, as it may cause failure in electrical conduction.DON'T leave motor shaft locked while power is applied, as even a short time lock up may cause excessive heat build up resulting in burning damage to the motor depending on its specifications.
For more information, please contact us directly or through our sales and representative offices.
Competitive Advantage
16 years experience in manufacturing motor and gearbox motorExperienced Staff: average 12 years experience in R&D , ODM & OEMInternational Approvals: ROHS/ISO9001/ISO14001/SGS/TS16949Competitive PriceHigh Product Performance: Low noise, High efficiency, Long lifespanPrompt Delivery: 20-25 working days after paymentQuality ApprovalsSmall Orders AcceptedAdvanced equipments: Automatic winding machine, stator automatic setting machine, end cover automatic setting machine, automatic soldering machine, etc
Quality Cotrol Test
Reliability Test & LaboratoryNoise TestWater-proof TestLife TestImpact TestStorage TestSalt Spray TestEnvironmental Related Substance
Tag:gear reduction motor,geared electric motor
Address:
Tower C, Tian-Fu Ind. Area, 262 Pingkui Road Ping-Shan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Toys
Management System Certification:
ISO 9001, ISO 14001, IATF16949
Company Introduction:
Hofon Precise Motor Limited was founded in the year of 2002, to the establishment of the DC micro motor, small modulus gear motor, brushless motor research and development of the manufacture and sale of customer service professional firms.
Hofon products, specialized R & D and manufacturing in consumer electronics, toys, model aircraft, security, automotive electronics and electronic equipment, office equipment to streamline the development of important pieces of the main zero.
Hofon is more conductive to customer demand, with customers to design and develop new products, specifically in the refined products focused on the needs of customers, shorten the cycle of research and development under the precondition of, and continued to enhance customer satisfaction and productivity and to create a positive Hofon customers out of the trust.
We are committed to the Company′s production of the motor and gear components with high quality and reasonable price, fast delivery and high satisfaction of marketing services around the world.