Basic Info.
Product Description
DTS series high-speed traverse double end milling machine adopts dual-leading-screw to adjust working width freely with a maximum width of 2500mm. It has different working stations as required, i. e., precutting, knife jumping, forming, finishing, chamfering and clipping, etc.
The traverse axis (axis B) is mostly used for forming and processing the ends of multi-layer wood composite floor. It can work with top and bottom saw and jumping knife for trimming and precutting. Additional jumping knife (axis T) may be adopted upon special request.
Technical Parameters DTS15-10D DTS15-4B+8D DTS25-10D+2T
Applicable Scope Laminate floor Wood composite floor Wood composite floor.
Working width(mm) 400-1500 400-1500 400-2500
Working thickness(mm) 6-15 6-18 6-18
Feeding speed(m/min) 25-40 15-30 15-30
Power of station 1(kw) 5.5 3 3
Power of station 2(kw) 5.5 3 5.5
Power of station 3(kw) 3 5.5 5.5
Power of station 4(kw) 3 5.5 5.5
Power of station 5(kw) 5.5 3 3
Rotate speed of cutter shaft(rpm) 6000-7000
Power of feeding motor(kw) 3.7
Gross weight of equipment(kg) 7000 8000
Axis dia. Of station 1-5(mm)
40× 75
Sweep-up dia. Of cutter cover(mm) 120
Sweep-up dia. Of driver chain(mm) 100
Cutter dia. (mm) 200-250
Height of working surface of table(mm) 950.
Remark: 1. D-high speed shaft, A-belt driven spindle, the working width can be adjusted to 2.5m, special customization is allowed.
2. Our company reserves the right to make further technical improvement.
DTM(X) Series Traverse Double End Milling Machine
DTM(X) series is light-duty double end milling machine developed by our company, featuring in high efficiency and strong practicability. It's an economical model fit for medium sized and small enterprises. This model has been enthusiastically welcomed and favored by the customers immediately since it was firstly released to the market.
DTM(X) is also applicable to the edge finishing of board plates such as antistatic floor, cement plasterboard, furniture board and solid-wood door and window.
DTM(X)15-8A 8-axle economical type traverse
Double-end milling machine
Working width(mm) 400-1500 Numerical display precision(mm) 0.02
Working thickness(mm) 6-20 Gas pressure(bar) 4
Rotate speed of cutter shaft(rpm) 6000-7000 Working voltage(v) 380± 5%/50Hz.
Power of feeding motor(kw) 3.7 Total power(kw) 34.8/38.8
Feed speed(m/min) 15-30 Gross weight of equipment(kg) 6000
Power of station 1(kw) 4/5.5 Shaft dia. Of station 1(mm) 40× 60
Power of station 2(kw) 4/5.5 Shaft dia. Of station 2(mm) 40× 60
Power of station 3(kw) 4/3 Shaft dia. Of station 3(mm) 40× 60/25
Power of station (kw) 3 Shaft dia. Of station 4(mm) 40× 25
Sweep-up dia. Of cutter cover(mm) 120 Sweep-up dia. Of driver chain(mm) 100
Cutter dia. (mm) 180-220 Height of working surface of table(mm) 950
Remark: 1. D-high speed shaft, A-belt driven spindle, the working width can be adjusted to 2.5m, special customization is allowed.
2. Our company reserves the right to make further technical improvement.