Dunnage Air Bag The Best Transport Safety Guard for Your Cargo 100*180cm

I. 1. What is dunnage air bag?
(1). The English name of dunnage air bag is dunnage bag/air bag/dunnage air bag.
(2). Dunnage air bag is made of kraft paper, PP and PE.
(3). Each material's gram/square respectively is: Kraft paper-80G/M2, PP-70G/M2 and PE-100-110G/M2.
(4). The total gram weight of kraft PP complex bag is 160G/M2, another 10 g / m2 is the weight of the adhesive.
(5). The maximum pressure of dunnage air bag is no more than 0.2bar.
(6). The inner bag's thickness is 10s.
(7). The inner bag of dunnage air bag has five arch film.
How air gun and hose links: Can be connected directly, can also through the rapid joint connection, can choose 8 mm / 10 mm hose.
II. Why do we use dunnage air bag of mm?
In the process of shipping and train, truck and land transportation, inevitable voids will bring frequent shift, collision even collapse, which cause varied degrees of damage.
The dunnage air bag of mm could fill the gap between the goods fully, absorb impulse caused by goods'shaking, fix goods on the container. Which could effectively avoid collisions of goods, play the role of protection effects.

III. Operating methods of dunnage air bag:
First of all, you need to prepare tools for inflate the air bag: Air compressor, air guns, trachea, air bags.
Step 1: Air compressor good power supply, connect the trachea and air compressor, the other side of the trachea connected with air gun.
Step 2: Place the corresponding specifications of the air bags in to fill the gap.
Step 3: Insert gas gun air bags valve mouth, ready to air.
Step 4: After the air gun docking with the valve, start the air compressor in air.
Step 5: When air bags are filled the gap and goods are not rocking back and forth on both sides, can be stopped.

IV. 1. The analysis of air leakage about dunnage bag.
First, quality issue: The work problem of product itself--we could find air leak case when we inflate.
Second, inflatable reason: Using wrong operational methods--strike dunnage bag' inner bag, which leads to air leakage.

Third, place problem: When dunnage bag is placed, the surface next to dunnage bag with bulge and sharp corner (wooden pallet, packing container etc. ), which could puncture dunnage bag during sea transportation.

The main reason is the second, some operators may screw off air valve, then insert gas tube into dunnage bag directly, which damage inner bag. However, operators did not realize it yet.

2. The correct operational method

First, we should inflate dunnage bag according to the following picture, and prohibit screwing off air valve cap for inflating.

Second, we should pick up bag instead of pressing it on the ground preventing inner bag' s damage with overexertion.

Third, when place dunnage bag, we should insure there is no bulge avoid its breakage. We had better place two piece of clapboard between dunnage bag and both surface of cargoes, which could avoid puncturing dunnage bag.

V. Specifications and selections about container dunnage bag

Primarily, the gap width of container relates to the width of dunnage bag, so we usually choose it according to the following ways:

Within 200 mm void - recommended 500 mm width dunnage air bag.

Within 300 mm void - recommended 800 mm width dunnage air bag.

Within 400 mm void - recommended 1000 mm width dunnage air bag.

Within 500 mm void - recommended 1200 mm width dunnage air bag.

But, if gap is more than 500 mm, it needs our sales staff to make free and special program for you.

Next, measure the overall height and depth of the goods gap. Because gap height determines dunnage bag's length. What's more, the width of dunnage bag depends on the comprehensive consideration of goods' gap depth and width.