Basic Info.
Application
Household Appliances, Automatic Doors, Industrial Machinery, Special Equipment, Infrared Sensor
Signal Transmission
Infrared Sensor
Type
One Beam Infrared Sensor
Transmission Distance
15m
Transport Package
Each Pair in a White Box or Color Box
Specification
49.2*76*21.6mm
Product Description
Technical Specifications
Technology: Infrared
Receiver Range: ≤15m,Range can be reduced to 30% in bad weather conditions:for,rain,dust,etc.
Infra-Red Frequency: 1.92 Khz
Power Supply: 12 to 24V DC/AC
Wave Length: 940nm
Input: RX 15mA - TX 30mA
Operating Temperature: -10°C to 70°C
Relay Output: 1A max 36V
Dimensions: 49.2*76*21.6mm
Note:
This is Active Infrared Detector. Install each pair at the opposite positions. Then there is a infrared area between these two detector parts. When someone passes the infrared region, the detector will send alarm signal to the security alarm host (which not included here).
Install Distance(Max.)in the above chart means the maximum install distance between the two detector parts.
Great to be installed for security system in school, office building, hosipital, home yard, etc.
Detecting range can be reduced to 30% in bad weather conditions, like rain, dust, et
payattention :
one:
1).The best installation height should be greater than 20 cm, mounting distance is less than 2 meters.
2).Equipment should be installed so that the red vertical placement outside the scope of protection, and on the Internet at the same level
3).Should be installed first to receive part of the re-installed as part of takeoff
4).As always together online, receive machine OFF light to put out, and then repair,
5).Cable installation is complete that.
two:
1).all detectors have to work together with alarm host,when somebody come to the detection area and cover the infrared beam,the detector gives alarm signal to the alarm host,and your alarm host calls you immediately.the siren sounds at the same time.the sounds(110db) last about 30 seconds to 1 minite,you can set the alarm time on the host yourself.
2).Because this product shoot power compare big, so when shoot machine with receive the machine
distance too near hour will appear have no the phenomenon of the reaction, at this time should draw back
them one meter at least behind again try. When install distance very near, discover not intelligent phenomenon,
can shoot and receive medium of the condensing lens remove, can immediately raise an intelligent degree.
Packaging & Shipping
Each pair in a white box or color box. 62 pair in a carton. Carton size:46*31*19CM
Trade terms
1).Payment: T/T only ,30% deposits before production,70% balance to be paid before delivery
2) .Samples can be delivered in 1-3 work days
3) .Shipping freight are quoted under your requests
4) .Discounts are offered based on order quantities
5). FOB price are quoted under inquiry
1. Are you a manufacture ?
yes , we have our own factory and we are tarding many years.
2. how can i know this model work for me ?
if you have a model in hand, please take a clear picture of the PCB board send to us then we will help you .
3. can i contact you ?
B:Tell : +86-755-89585459
Address:
2nd Floor, 490 Jihua Road, Bantian, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen champions Technology Co., Ltd. is a new high-tech electronics companies, the company is committed to electronic product development, production and sales service, to create wireless remote control, wireless receiver module, wireless controller, smoke detector, gas detection, wireless infrared and radio detection, door, home burglar alarm, vehicle control and alarm, electronic gifts dozen electronic products.