100-400mm Carbon Anode Scrap/Anode Butts Instead of Foundry Coke From China / Malaysia /Middle East

NOTE:

We not only export the anode scrap directly from China, but also provide you with the anode scrap from Malaysia and some countries in the Middle East. In addition, we are working with China's carbon anode exporters to cooperate with more aluminum factories and obtain more direct supply of anode scrap.

We cooperate closely with China Electrolytic Aluminum Corporation and win the bidding of carbon anode butts. So we  can provide carbon anode butts with best price and stable quality.

It can be broken and selected into different sizes before use. It is more suitable in areas with lower labor cost.


RELATION WITH FOUNDRY COKE: 
In the process of scrap metal smelting, foundry coke has low sulfur content, high ash content and low fixed carbon content, carbon anode scrap(other name: Carbon anode butts) show opposite characteristics as fixed carbon content is more than 97%. But the sulfur content of the carbon anode scrap is usually about 2%. So it is used together with foundry coke for smelting production as fuel. Thereby reduce smelting cost of waste metal because the calorific of carbon anode scrap is usually 1.5 times that of foundry coke. More infomations of foundry coke:

Many electrolytic aluminum plants in the world import carbon anodes from China, which enables us to better establish close cooperation with these aluminum plants on the anode scrap & carbon block (other name: Anode Butts and instead of foundry coke). Of course the price offered to you has a competitive advantage, and win-win cooperation will be our consistent philosophy. 

At present, There is a lot of carbon anode scrap for sale in our factory. We not only export the anode scrap directly from China, but also provide you with the anode scrap from Malaysia and some countries in the Middle East. In addition, we are working with China's carbon anode exporters to cooperate with more aluminum factories and obtain more direct supply of anode scrap. 

As the sulfur content of anode scrap actually depends on the calcined petroleum coke used to produce carbon anode, the ash content usually increases slightly on the basis of calcined petroleum coke, but its ash content is much less than that of foundry coke, with its calorific value being 1.2-1.5 times of foundry coke. As a result, when the sulfur content can be controlled, anode scrap is the ideal fuel to smelt scrap metal. 

In China, we usually crush anode scrap, sieve and wash it. The crushed anode scrap in small particles is more commonly used in the burdening of carbon paste. For the anode scrap particles of 1-5mm that are air-dried after washing, they contain low ash and impurity content, with up to 95% content of fixed carbon, can be directly used as the raw material for low-end carburant, or be combined with other carburant to increase carbon content. 

APPLICATION OF CARBON ANODE SCRAP: 
(1)Waste copper and aluminum smelting
(2)Cupola furnace as fuel
(3)Carbon paste with Electrically Calcined Anthracite Coal
(4)Carburant for foundry

MAIN FEATRUES: 
(1)High calorific value and low Moisture
(2)Material purity and Moderate sulphur content

SPECIFICATIONS:
we offer different sizes and customization as following
FOR YOUR ATTENTION: 
(1)Anode scrap is crushed and sieved into small sizes like 10-30mm, 30-80mm and 1-5mm. As China has accumulated rich experience and possesses mature application system in this respect, it is recommended to directly import from (2)China from the perspective of stability and guarantee of quality. 
(3)After sieving, the anode scrap particles with a size of 1-5 mm are washed, manually picked and dried, and its ash content is removed, so as to ensure that the product contains no other impurities or foreign matter. 
(4)For bigger sizes of anode scrap particles, you can choose from these origins based on the actual situation: China, Malaysia and the Middle East. 
(5)It is necessary to apply a permit from the Chinese government every time when exporter will export carbon anode butts. It often takes ten work days. 
(6)In the Chinese market, Prices will be adjusted on the 25th every month due to the electrolytic aluminium plant invites tenders for carbon anode butts once a month


CONTACT US:

Jun Xiang
Manager & Engineer
 
JH CARBON LIMITED 
More than 25 years in carbon industry. Business lines cover carbon anode scrap, carburant, calcined coal, calcined petroleum coke, pet coke, graphite scraps...etc