Kanngkun Brand Steel Tube Straightening Derusting Brushing Paint Machine

With the improvement of world people's standard of living, the buildings, the bridge and road project and the leasing industry are enlarging, a kind of construction ground cleaning machine which is abroad applied to cleaning the landing ash before laying new floor of every floor of bridge and bridge and rode project come out in our company, . If the cement ash is not cleaned out completely, it will lead to un-fastness, Interspace, crackle and heave which will occur between new concrete slurry and building floor, which will influence the quality of project seriously. But for many years, manual removing cannot reach the effect. The machine which improve the efficiency of a dozen times than manual working, changes the slow, low efficient and worrying work. It is a kind of necessary special equipment for specialized cleaning teams, all construction, bridge and road project, leasing company, etc. Hence it will bring invaluable economic efficiency and social benefits for construction industry.

There are thousands tons of scaffolds as construction, leasehold and road and bridge, because the steel's thickness is easy to be reduced for being rusted after suffering wind and rain during construction, and some parts are easy to bend during disassembly and transportation. There are 35 steel tubes per ton, and each steel tube can use more than RMB 3 Yuan one year, one hundred more than RMB 10 thousands Yuan, one thousand more than RMB 100 thousands Yuan. If painting the steel tube with rust, the paint is easy to fall off, which brings a big hidden trouble to safe. For most old bad steel tubes are still used together with new ones, it not only offend the construction requirements but also offend the rules of supervising department. The quantity of accidents happened in construction as the falling down of scaffold is countless. So, after the project is finished, alignment and de-rust must be carried out, and then paint them. It can save fund and prolong the use life, in order to reduce safe factor. However, the steel tube belongs to round end-face, so it is beyond people's ability. The machine is specially used for scaffold steel tube alignment rust removing. It has been very popular with the consumers since it was introduced to the market.

The steel tube alignment de-rust machine of Kangkun brand, the newest multi-patent, is divided into two working areas. During getting rid of rust, the steel tube is pushed automatically, and multi-brush hairs form two directions to eliminate. For 6 m of steel tube, it only takes 3 minutes. The alignment adopts hydraulic pressure equipment, and it can adjust big bend for 1 m one time, small bend for 10 cm. And it only takes 2 seconds to adjust move pivot according to the bend. Alignment and de-rust can be carried out at the same time, or separately.