Basic Info.
Product Description
Coriolis mass flowmeter | KCF200 |
Range | 0-100kg/h |
Accuracy | '+-0.5%+-0.2%+-0.1% |
Medium temperature | '-50-150ºC |
output | 4-20mA |
communication | RS485/HART |
power | 24VDC&220VAC |
IP code | IP67 |
Explosion Proof | EXdibIIC T6 Gb |
The Coriolis mass flowmeterModel: KCF200 Product Description:The KCF200 series mass flowmeter is based on the (Coriolis Force) principle,Realize direct precision measurement of fluid mass flow without any conversion or correction of pressure, temperature, viscosity, density, etc. Its structure is composed of the sensor unit and the transmitter unit. The Coriolis mass flowmeter is capable of directly measuring the mass of the fluid, having0.1%~0.2% with high accuracy. Measurement indicators:Scope of application: Measurement of ambient temperature of mass or volume flow of liquid, gas, liquid solid or gas solid: Sensor: -41ºC ~ + 150ºC transmitter: -41ºC ~ + 80ºCMedium temperature: Standard configuration-50ºC ~ + 150ºC (-200ºC ~ + 350ºC izable) density measurement accuracy: ± 0.002g/cm³, ±0.001g/cmMeasurement pipe material: 316L stainless steel or Harbin C alloyApplication industry: It can be widely used for measuring various non-Newtonian fluids, various slurryLiquid, suspension, high viscosity fluid, etc. Productcharacteristics:
- Low installation requirements (the requirements for the instrument front and rear straight pipe section are not high);
- Reliable, stable operation, and low maintenance rate;
- High accuracy and good reliability;
- Many applicable media;
- The instrument display data is complete and easy to use.
-
Operating principle:
A consistent force is generated when a particle in a tube located at the center of the P point does movement toward or away from the center of rotation. Instrument options considerations:
- The liquid shall be measured with the common flow and the maximum minimum flow using the appropriate range.
- Measurement of gas shall calculate the flow speed selection combined with process pipe diameter, pressure, common quantity and maximum minimum amount.
- Measure high viscosity fluid or liquid solid two phase fluid, to inform viscosity, density, process pipe diameter, common quantity, and maximum minimum flow.
- Measure corrosive medium to inform the specific medium chemical name, select different measuring pipes (316L, ha C alloy, lined with tetraafluoride)
Performance parameters:
- Scope of application: Measurement of mass or volume flow of liquid, gas, liquid solid and gas solid
- Measurement pipe material: 316L stainless steel or Harbin C alloy
3. Medium temperature: Standard configuration-50ºC ~ + 150ºC (-200ºC~+ 350ºC Customizable)4. Ambient temperature: sensor: -41ºC ~ + 150ºC transmitter: -41ºC ~+80ºC 5. Flow measurement accuracy: ± 0.5%, ± 0.2%, ± 0.1% flow ± [(zero stability / flow value) 0000000000000000000 × 100]% flow6. Densiity measurement accuracy: ± 0.002g/cm³, ±0.001g/cm7. Repeatability: ± 0.10%, ± 0.05% Flow ± [(zero-point stability / flow value) × 100]% Flow- Pressure grade: See the following table in the standard configuration. Other high pressure can be ordered specially
- Output signal: 4~20mA load resistance <500 Ω (instantaneous flow or density optional) 0~10kHz instantaneous flow pulse signal; 485 communication signal HART(needs to be customized)
- Exploproof grade: EXdib II C T6 Gb
- Protection level: IP67
12. electrical interface: M20 × 1.513. Power supply: 24V DC (current not less than 500mA) or 220V AC14. Language: Chinese / English
Address:
D302, Building 8, Tanggu Safety Information Industrial Park, Binhai New District, Tianjin, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
I′m kyue tianjin, Manufacturer of pressure transmitters, pressure sensors, flow meters, level gauges, acting as an agent for Siemens, Emerson and Druck etc. If you need anything, please contact me.