USB Oscilloscope

Function introduction

· 5 channel input, synchronous display
· Automatic measurement of amplitude, 4 measurement modes optional
· Input capture (trigger) function
· Any channel can be set as a capture (trigger) source
· Can set rising or falling edge capture (trigger) signal
· Capture (trigger) signal level adjustable
· Data can be saved to the computer, automatically transferred to the saved data when the software is started
· Data can be backed up, and later at any time to view the backup data waveform
· Can display any two channels of differential signal
· Lock signal to expand and compress waveforms up to 90 hours
· Suitable for monitoring the operation of electrical equipment for a long time and archiving
· Suitable for collecting and archiving data such as temperature, humidity and light for a long time

Technical Parameters

· Interface type: Micro USB 2.0 
· Signal input interface type: BNC interface, connected with the oscilloscope probe line
· Maximum sampling rate:
1MHz  ( 1*1MHz / 2*1MHz / 3*0.5MHz / 4*0.5MHz / 5*0.33MHz )
· Operating voltage: 5 V Micro USB interface power supply
· Consumption current: < 2 A
· Measurable frequency range: 0Hz-----250 kHz
· Amplitude adjustment range(/DIV):
2 mV; 5mV; 10mV; 20mV; 25mV; 40mV; 50mV; 80mV; 
0.1V; 0.2V; 0.5V; 1V; 2V; 5V; 10V
· Input impedance: 1 MΩ/20pF 
· Maximum measurement voltage: ±80 V,
· Time domain range: 10 uS/DIV-----10800 S/DIV
· Data recording and storage depth: 8388608 * 5
· Maximum record and save data time: 90 hours
· Host size: 115mm * 70mm * 29mm
Connection method 

Connect the oscilloscope to the computer using the USB cable.
Software Installation

1, connect the oscilloscope to the computer, double click Help in the disk drive to enter the download page.
2,enter the following address in the address bar of the web browser to download the software.

Packing list:
Fosc53C1:1pcs
BNC connector: 5pcs
USB data cable : 1pcs

THANKS!