Dry Mortar Production Line 2-100t/H, Dry Mortar Plant

Description of mortar production line:
I. This line has simple structure, flexible production process and low cost. Equipments on this line are easily repaired and replaced.
II. The raw materials for mortar are mainly sand, cement, and limestone. They are very cheap, thus, give more additive value to mortar.
Over all, this line is of high profit and is the best choice for investors.
FRQ:
How many kinds of mortar can this line produce?
A: There are more than 16 kinds of mortar and this line can produce about five of them. If you want to produce even more, we can also offer.

2. How many person needed in this line?
A: 3-5 workers will be enough to operate this line.

3. Is the line full-automatic?
A: Yes, we can custom as your need.
4. What's the difference between full-automatic line and semi-automatic line?
A: (1)Sem-automatic line need manual help to upload materials, while full-automatic line need not.
(2)semi-automatic line may not need material silos, full-automatic line need.
(3)Semi-automatic line is relatively cheaper than full-automatic line.
5. Is it including packing machine?
A: Yes. We have three kinds of packing machine. Mortars can be packed in bags and tank.
6. How many types of mortar production line is there? What's the difference?
A: (1)Normally, three. Vertical type, block type and workshop type.
(2)Vertical type: The height of this line is big and more investment of steel supporting structure Block type: More factory area less steel supporting structure
Workshop type: Install in a workshop and the height should be low

7. What is factory area needed? .
A: It depends on the line type. 20-200m*m will be enough

8. Is it only dry or can make wet also?
A: This line is most suitable for dry mortar and can mix wet mortar with 16% moisture.
9. What's the total power consumption (KW)?
A: It is about 20-200KW. It is widely depends on the capacity and number of raw materials.
10 What's the capacity of the line?
A: 2-100 ton per hour.
11. What's the guarantee period?
A: 12 months. With in this 12 months we take care of all the problems occurred, after that we offer repair and maintain service.

12. Can you install in my country?
A: Yes, we offer oversea installation service.

13: Can you teach us how to operate this line?
A: Yes. We offer training service free of charge.
14: What's the delivery date?
A: 30 days.
15: What's the payment term?
A: TT and L/C.

16. Can you delivery to my port?
A: Yes, no problem.

17: How can I inspect the line before shipment?
A: You can inspect by yourself or you fine someone inspect for you.

Materials for mortar:
1. Cementing material: Cement, lime, plaster.
2. Aggregate: Yellow sand, quartz sand, limestone, dolomite, expanded perlite.
3. Mineral admixture: Industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder.
4. Water-retention and thickening material.
5. Chemical additives.
Production process:
1. Raw material storage
2. Raw material convey and weigh
3. Addition and weighing of additive
4. Materials mixing
5. Finished mortar storage and packing
6. Other device: Dust collection system+air compressor system+PLC electric controlling system+steel supporting system