Basic Info.
Model NO.
Chlorine Sensor CP2.1 and CP3
Product Description
Chlorine Sensor CP2.1 and CP3
Chlorine sensor with membrane-covered, amperometric 3-electrode system. For the measurement of total chlorine with greatly reduced pH dependence, also in seawater.
Please contact us directly
Product description:
• Measurement: NaClO (sodium hypochlorite), Ca(OCl)2 (calcium hypochlorite), Cl2 (chlorine gas), electrolytically generated chlorine
• Calibration: at the controller, via analytical chlorine determination by DPD-4 method (DPD-1 + DPD-3),
• Interferences: ClO2 is registered with 100 %, O3 is measured with a slope of approx. 130% (factor 1.3 with regard to the chlorine slope)
• Resolution: depending on the sensor type 0.1 ... 0.001 ppm,
• pH range: 4 ... 12 (linear decrease with approx. 5 % per increasing pH-unit)
• Pressure range: 0.5 bar, no pressure surges and/or fluctuations,
• Temperature range: 5 ... 45 °C,
• Sensor with automatic temperature compensation
• Response time: T90 approx. 2 min.,
• Flow rate: approx. 30 l/h, low flow-dependence,
• Shaft length: 175 mm, 195 mm, 205 mm,
• Material: microporous hydrophilic membrane, PVC-U, Peek, stainless steel 1.4571
Areas of application:
• Swimming-pool-, drinking- and sea water, surfactants are partially tolerated;
special electrolyte for the use in sea water
Scope of supply:
• CP2.1, CP3: sensor, membrane cap, electrolyte
Ordering data:
Type: Chlorine sensor CP2.1 | Measuring range: ppm | Resolution: ppm | Output signal: | Power supply: | Item number: |
CP2.1H | 0.005 ... 2.000 | 0.001 ppm | 0 ... -2000 mV 1 kΩ | ±5 ... ± 15 V DC 10 mA | 3326018 |
CP2.1N | 0.05 ... 20.00 | 0.01 ppm | 3326026 |
CP2.1MA0,5 | 0.05 ... 0.50 | 0.01 ppm | 4 ... 20 mA | 12 ... 30 V DC RL: 50Ω ... 900Ω | 3326038 |
CP2.1MA2 | 0.01 ... 2.00 | 0.01 ppm | 3326027 |
CP2.1MA5 | 0.01 ... 5.00 | 0.01 ppm | 3326037 |
CP2.1MA10 | 0.01 ... 10.00 | 0.01 ppm | 3326036 |
CP2.1MA20 | 0.01 ... 20.00 | 0.01 ppm | 3326019 |
CP2.1MA0.5-M12 | 0.05 ... 0.50 | 0.01 ppm | 4 ... 20 mA | 12 ... 30 V DC RL: 50Ω ... 900Ω | 3426500 |
CP2.1MA2-M12 | 0.01 ... 2.00 | 0.01 ppm | 3426501 |
CP2.1MA5-M12 | 0.01 ... 5.00 | 0.01 ppm | 3426502 |
CP2.1MA10-M12 | 0.01 ... 10.00 | 0.01 ppm | 3426503 |
CP2.1MA20-M12 | 0.01 ... 20.00 | 0.01 ppm | 3426504 |
Chlorine Sensor CP3:
Type: Chlorine sensor CP3 | Measuring range: ppm | Resolution: ppm | Output signal: | Power supply: | Item number: |
CP3H-An | 0.005 ... 2.000 | 0.001 | 0 ... -2000 mV (max. -2500 mV) 1 kΩ | 9 ... 30 V DC ca. 20 ... 56 mA | 3326920 |
CP3N-An | 0.05 ... 20.00 | 0.01 | 3326921 |
CP3H-M0c | 0.005 ... 2.000 | 0.001 | Modbus RTU | 3326960 |
CP3N-M0c | 0.05 ... 20.00 | 0.01 | 3326961 |
Spare parts:
Spare part: | For sensor type: | Item number: |
Membrane cap M48.2D | CP2.1H, | 9026022 |
Membrane cap M48.2 | CP2.1MA, CP2.1N, CP3 (all types) | 9026020 |
Electrolyte ECP1.3/GEL | CP2.1 and CP3 for measurement without salts <1g/l in the water (all) | 9026056 |
Electrolyte ECP2S/Gel | CP2.1 and CP3 for measurement in salt water (all types) | 9026055 |
Accessories:
Type: | For sensor type: | Item number: |
Sensor simulator pH, Redox, Cl | all sensors with mV signal | (10115) |
mV sensor simulator | all sensors with mV signal | 9026205 |
mA sensor simulator | all sensors with mA signal | 2125100 |
mV simulator and mV tester | all sensors with mV signal | (10300) |
mV simulator and mA tester | all sensors with mV signal or mA signal | (10305) |
Photometer for calibration | all sensors | |
Reagent for photometer | all sensors | |
Amperometric and potentiostatic sensors:
We offer you a wide range of sensors and accessories like probe holders for your particular measurement, control and dosing needs:
- pH
- Redox (ORP)
- Conductivity / temperature
- Chlorine
- Chlorine dioxide
- Chlorite
- Bromine
- Ozone
- Hydrogen peroxide
- Peracetic acid
- Others (open chlorine probes)
Amperometric sensors
Are an important product group in water disinfection. They are indispensable for the disinfection of drinking water, swimming pool water, industrial water and process water.
The constant development and optimisation to which our amperometric sensors are subjected means that they are now one of the most reliable measurement probes in water disinfection.
We are experts in Measurement, Control, Dosing and Desinfection and supply:
- Measurement and Controlling equipment
- pH-, ORP-electrodes, probes for conductivity and turbidity, temperature probes
- Electrochemical sensors such as chlorine, chlorine dioxide, chlorite, ozone, hydrogen peroxide, peracetic acid, oxygen
- Dosing pumps, complete dosing systems
- Desinfection systems such as chlorine dioxide generators, UV-plants
- Swimming Pool technology.
For all this equipment we supply complete accessories.
Please contact us directly
Address:
10g13 Shanghai Mart, (West) Yanan Road, Changning District, Shanghai, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Tools & Hardware
Company Introduction:
Morguen Co., Ltd is a leading professional manufacturer for Amperometric and potentiostatic sensors.
Amperometric and potentiostatic sensors we offer you a wide range of sensors and accessories like probe holders for your particular measurement, control and dosing needs:
- pH
- Redox (ORP)
- Conductivity / temperature
- Chlorine
- Chlorine dioxide
- Chlorite
- Bromine
- Ozone
- Hydrogen peroxide
- Peracetic acid
- Others (open chlorine probes)
Amperometric sensors are an important product group in water disinfection. They are indispensable for the disinfection of drinking water, swimming pool water, industrial water and process water.
The constant development and optimisation to which our amperometric sensors are subjected means that they are now one of the most reliable measurement probes in water disinfection.
We are experts in Measurement, Control, Dosing and Desinfection and supply:
- Measurement and Controlling equipment
- pH-, ORP-electrodes, probes for conductivity and turbidity, temperature probes
- Electrochemical sensors such as chlorine, chlorine dioxide, chlorite, ozone, hydrogen peroxide, peracetic acid, oxygen
- Dosing pumps, complete dosing systems
- Desinfection systems such as chlorine dioxide generators, UV-plants Pool technology.
- Bromine
- Ozone
- Hydrogen peroxide
- Peracetic acid
- Others (open chlorine probes)
For all this equipment we supply complete accessories.