Basic Info.
Model NO.
1.5kw ER11 Water Cooled Spindle set
Logo Printing
with Logo Printing
Customized
Non-Customized
Certification
ISO 9001:2008, ISO 9001:2000, CE
Bearing Type
2 X 7002c P4 Dt and 1X 7000c P4 Dt
Spindle Clamping Bracket
80mm
Product Description
Spindle: 220V 1.5KW ER11
Basic parameters:
Size: 80x200mm (Middle body diameter:80mmxLength:200mm)
Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
Cooling: Water cooling
Power Interface: Optional H20-4 pins waterproof air plug. The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground. (Pay attention! our spindle "4" connecting to GND,promised personal safety!!)
Power: 1.5kw (1HP=0.735kw)
Voltage: 220vAC (If you need 110v/380v spindle ,please leave message to us,thank you)
Frequency: 400Hz
Speed: 0-24000rpm
Runout Off: 0.01mm
4pcs bearings
Bearing Type: 2×7002C P4 DT & 2×7002C P4 DT
Collet: ER11
Clip Knifediameter: 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
Grease Lubrication
Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working,but not milling working.(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)
Advantage:
P4 angular contact bearings ,2×7002C P4 DT & 2×7002C P4 DT,increase spindle life.(New type,4 bearings)
Longer length make the torque bigger,more powerful.
Carefull assembly make the spindle more precisional.
Precision 0.01mm.Coaxial degree less than 0.0025mm
Shipment within 4 days,promise the delivery time.
Care and maintenance:
Water cooled spindle MUST be used with water pump. Otherwise the spindle will soon broken.
AC spindle motor MUST use with inverter. The power of inverter need equal or bigger than the spindle power. Before using,please set up the inverter parameters suitable for spindle. Otherwise the spindle and inverter will broken at once.
When you use the spindle,the noise is not same as always,please STOP the spindle at once. You may need to replace the spindle bearings.
Inverter: 220V 1.5KW
Tech parameters:
Inverter Type: 220v 1.5kw
Input Voltage: 220V(+/-15%) ,We also stock 380V(+/-15%), please contact us
Output Voltage: 220vAC
Input Frequency: 48-63 Hz
Output Frequency: 0-400 Hz
Input Phase: 1 or 3 phase
Output Phase: 3 phase
Warranty: 1 year from the date you purchased
Product Feature:
PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;
Easy PLC function can realize 16 legs of speed and inverter control function;
RS485 communication port, adopting standard international MODBUS main circuit control;
With extremely strong anti-jamming capability
Low output ratting torque0.5HZ-150%, low speed running ability;
Carrier adjustable by 16KHZ, completely soundless working environment;
Broad voltage working area, normal running in 304V-456V;
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
With perfect error protection and short circuit starting protection capability;
Advantage:
Control Mode is SPWM,it is very easy to use and convenient
Protection functions are very strong,
Fin over-heat protection,
Overload protection,
Fuse protection,
Restart after instant stop,stall protection.
Powful function
Low price
80mm Cast Aluminium Bracket:
Diameter: 80mm
Material: Cast Aluminium
Features:
Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth,.
Cast aluminium fixture is much heavier than aluminium profile fixture
Product Description:
Cast aluminium fixture is high quality aluminium which is casting with a special manufacturing process ,compared with ordinary aluminium ,This product has toughness, strong shock resistance, high hardness and strong antioxidant activity.
Usage:
Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error
Water Pump:
Basic parameters:
Max Head: 3.2 m;
Power: 75w
Maximum Flow: 3200L / H
Plug Cord Length: 1.4m
Voltage :220V
Frequency: 50 HZ
Outlet size: 4 and 6 mm
Dimensions: 145 * 110 * 90 mm
Advantage:
High Lift
Large Flow Rate
Highly Durable
Excellent Insulation
Can cool the machine quickly
Good quality and long life
Large inventory
Big strong power
Features:
The shell is made of high quality plastic, which is anti corrosive and high durable.
Pumps have excellent insulation thanks to the motor bearing completely sealed.
Pumps combione pumping, filtered,oxygen and fountains in one.
Note:
Must be used in the water.
Must cut off the electricity once the product works improperly and must maintain it after lifting it from the water.
Address:
Room 518 Building 7, Shuangying Guoji, Dong Fang Road, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Individuals/SOHO, Other
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, ISO 9000, EICC
Company Introduction:
Suzhou Penny Machinery Equipment Co., Ltd is a professional CNC Technology Company. We have boasting strong R&D strength and high quality service team, it can quickly provide customers with excellent products and efficient service, in the light of professional perspectives and rigorous attitude.
Since its founding, sticking to the corporate philosophy of "Specialized Concentrated Focused", we have always devoted itself to developing, producting and selling high quality CNC machine and parts. Now our productions are widely used in machining center, laser cutting, waterjet cutting, engraving&milling, mold making, advertising, glass and stone machining, etc.
Specialized: Provide perfect products by specializing in what we are adept in!
Concentrated: Satisfy customers by patiently listening to their opinions and demands!
Focused: Make innovations constantly by single-heartedly devoting to product R&D!
Integrity: Essence of values; Innovation: Soul of values; Pragmatism: Rule of values.
We believe every small act makes a differentce, together we can creat a better world!