Fully Automatic Refrigerator Door Gasket Welding Machine

Fully automatic refrigerator door gasket welding machine

11. Specification
Dimensions 1820*1820*1130mm
Horizontal clamping stroke 50MM
Vertical clamping stroke 98MM
Total system power 2.1KW
Electric system power 2KW
Welding cycle 11 to 14 seconds of the welding cycle /dual angle
Work efficiency 800to850 frame /shift
Model Number MFT-2A
Total weight 480KG
Register warranty 1 year
Control automatic

Feature:
High efficiency:
Welding machine has single angle welding, dual angle welding and three angles welding. Door gasket welding qualified rate is higher than percent 99.8.

Single angle welding: 60mm*60mm, 500 to 600 frames/shift.
Dual angle welding: 45mm*45mm, 800 to 850 frames/shift.
Three angle welding: 30mm*30mm, 1000 to 1100 frames/shift.
Safety:
A. Mould of the front that installed both hands start button, photoelectric switch and limit switch.

Both hands at the same time press the start button to be welding mould not shut before, the hands touch photoelectric switch that process be stopped, and right-left mould can't shut, so prevent to be injured. But proper functioning, don't touch photoelectric switch.
Before insert door gasket, before and after don't automatic shut. After insert door gasket, and both hands start limit switch, the mould just can shut, so prevent to be injured.

B. Mould of the front that installed both hands start limit switch.

Distribution box used disconnecting switch of Hz12-5, only switch off can open distribution box, so prevent electric shock, and ensure safety of the operator and maintenance personnel
Below the operating floor install protective screening, ensure that the body don't be hurt by the heater.

High quality:
Welding mechanical structure is very strong, and Electrical elements used PLC of OMRON, contactor of Schneider, transformer of CHINT, pneumatic components of SXPC.

1. MFT-2A type welding machine is special welding PVC profile door gasket of refrigerator, fridge and disinfection cabinet. The machine applies advanced technology of PLC industrial automation control system and surmounts that old equipment caused by the mistakes of action due to electrical components too many. The pneumatic system used international brand SMC or FESTO of pneumatic components and OMRON electrical components, so to ensure the stability of the program, and improved the quality of the equipment. In the country our door gasket welding machine belong advanced equipment.
2. Legacy devices trim excess material existence of the artificial\welding beading.
Old equipment affected welding way, the quality of personnel, fatigue and other factors. We can't guarantee the quality of welding angle and products quality requirement.

3. MFT-2A type door gasket welding machine is fully automatic welding equipment of dual angle. At the same time finished welding, automatic clear away welding beading of the corner, so ensure the welding angle of the smooth, beautiful, firm, and improved production efficiency.

4. MFT-2A type door gasket welding machine on the way of welding through a number of optimized designs, and breaking the traditional concept. The mould divides into up and down two-tier, use precision linear roller guide transmission, so ensure production accuracy of the machine.
Welding as follows: Automatic heating (baking way) - vacuum-welding and clear residue- internal cooling -external cooling- automatically exit.