Basic Info.
Surface Treatment
Lagging or No Lagging
Motor Type
Frequency Control Motor
Product Name
Airport Check-in Counter Using Reasonable Prices D
Shell Material
Carbon Steel or Stainless Steel
Power
0.25~1.10kw as Per Different Voltage
Type
Drum Motor / Idler Pulley
Certification
UL; Ce; ISO 9001
Application
X-ray Machines; Package Machines and So on
Transport Package
Wooden Case
Product Description
[PRODUCT DESCRIPTION]
All TM138 drum motors have the following characters:
1. Drum motor shell
Standard Mild steel shell treated with anti-rust oil
Food grade drum motor shell can be supplied in stainless steel-304
2. Gear transmission
Gears machined and honed to AGMA/DIN 6 standards to ensure low noise
Die cast aluminium gearbox
3. Motor
Common global voltages at 50 Hz or 60 Hz
Motor windings insulation class F
All motors with thermal protection
Oil cooled electrical motor
Cable length standard 1.2 meters outside shaft
4. Sealing system
Double shaft sealing system
Sealing system-degree of protection IP 66/67
5. Oil
Pre-lubricated with oil
Oil change recommended every 50,000 hours of operation
6. Other items
Backstop(anti-run back) or electromagnetic brakes can be fitted on requests
An electromagnetic brake is fitted on requests, but the min. face width will be increased
To be used in the horizontal position only
Belt speed and face width(L)on requests
Non-standard drum motors are available on requests
Conformity with CE and UL safety certificate
[TECHNICAL DATA]
AMROLL drum motor TM138 -3*400v/50Hz
Power (kw/hp) | No. of poles | Gear stages | Gear ratio | Nominal belt speed (m/s) | Full load torque (Nm) | Full load belt pull (N) | Full load current (A) | Min. Face width (L) (mm) | Full load torque (Nm) |
0.25/ 0.34 | 6 | 3 | 58.87 53.21 48.36 | 0.11 0.13 0.14 | 162.15 135.10 115.85 | 2350 1958 1679 | 0.99 | 400 | 15 |
0.37/ 0.50 | 2 | 3 | 16.87 15.33 | 1.19 1.32 | 21.87 19.46 | 317 282 | 0.92 | 400 | 14 |
4 | 3 | 58.87 53.21 48.36 37.23 29.33 26.51 24.10 18.55 | 0.17 0.19 0.21 0.28 0.35 0.39 0.42 0.55 | 150.01 133.31 119.99 95.98 75.00 66.65 60.03 48.02 | 2174 1932 1739 1391 1087 966 870 696 | 1.05 | 400 | 14 |
2 | 16.87 15.33 11.80 | 0.60 0.67 0.87 | 43.75 38.92 30.64 | 634 564 444 |
6 | 3 | 58.87 53.21 48.36 | 0.11 0.13 0.14 | 239.98 199.96 171.40 | 3478 2898 2484 | 1.50 | 400 | 17 |
0.55/ 0.75 | 2 | 3 | 58.87 53.21 48.36 37.23 29.33 26.51 24.10 18.55 | 0.34 0.38 0.42 0.54 0.69 0.76 0.84 1.10 | 111.51 99.08 89.22 71.35 55.75 49.54 44.57 35.67 | 1616 1436 1293 1034 808 718 646 517 | 1.28 | 400 | 14 |
2 | 16.87 15.33 11.80 | 1.20 1.30 1.70 | 32.45 28.91 22.77 | 471 419 330 |
4 | 3 | 58.87 53.21 48.36 37.23 29.33 26.51 24.10 18.55 | 0.17 0.19 0.21 0.27 0.34 0.38 0.42 0.54 | 222.94 198.17 178.37 142.69 111.51 99.08 89.22 71.35 | 3231 2872 2585 2068 1616 1436 1293 1034 | 1.57 | 400 | 17 |
2 | 16.87 15.33 11.80 | 0.60 0.65 0.85 | 65.07 57.82 45.54 | 943 838 660 |
0.75/ 1.02 | 2 | 3 | 58.87 53.21 48.36 37.23 29.33 26.51 24.10 18.55 | 0.34 0.38 0.41 0.54 0.68 0.75 0.83 1.08 | 152.01 135.10 121.65 97.29 76.04 67.55 60.79 48.65 | 2203 1958 1763 1410 1102 979 881 705 | 1.63 | 400 | 17 |
2 | 16.87 15.33 11.80 | 1.18 1.30 1.68 | 44.37 39.40 31.05 | 643 571 450 |
4 | 3 | 48.36 37.23 29.33 26.51 24.10 18.55 | 0.21 0.27 0.34 0.38 0.42 0.54 | 243.23 194.58 152.01 135.10 121.65 97.29 | 3525 2820 2203 1958 1763 1410 | 2.00 | 400 | 18 |
2 | 16.87 15.33 11.80 | 0.60 0.66 0.85 | 88.73 78.87 62.10 | 1286 1143 900 |
1.10/ 1.50 | 2 | 3 | 48.36 37.23 29.33 26.51 24.10 18.55 | 0.41 0.54 0.68 0.75 0.83 1.08 | 178.37 142.69 111.50 99.08 89.22 71.35 | 2585 2068 1616 1436 1293 1034 | 2.62 | 400 | 18 |
2 | 16.87 15.33 11.80 | 1.18 1.30 1.69 | 63.69 57.82 45.54 | 923 838 660 |
At the min. face width (L), the total weight of a drum motor grows approx.2.5 kgs per 100 mm.
[APPLICATIONS]
TM138 drum motor, is known for the high efficiency, powerful and smooth running with high quality gears, performs with efficiency powers ranging from 0.25 to 1.10 kw. This drum motor is used in X-ray machines (airport and railway station) and food processing widely. It be used the machines as follows:
X-ray machines (airport and railway station)
Baggage check-in counters at airports
Packaging machine
Dynamic weighing equipment
Pharmaceutical handling
Food processing
Meat, poultry and fish industry
Postal sorter
Belt conveyors
Light agricultural conveyor
· [ENVIRONMENTAL CONSIDERATION]
• Low /high ambient temperature: 5ºC to 40ºC Below +5ºC or above 40ºC, special oil.
• Extremely dusty/abrasive wet/high humidity:
IP66/67 sealing, special finish, i.e. stainless steel, electro-galvanizing, nickel plating, rubber lagging.
• Under water applications:
Where specified IP66/67, the drum motor has been tested for 30 minutes under 1 meter of water. However, the motor is not intended for continuous under water performance.
• Reversible conveyor.
Time delay between forward and reverse: The motor must come to a complete stop before reversing. Drum motor installed in the middle of the conveyor is recommended.
• Extremely low noise/vibration environments, consult Seaparks Company.
• High altitudes>1000m, consult Seaparks Company.
• Amroll drum motors are not intrinsically safe or explosion proof.
• Exact speed requirements
For encoder solution and frequency converter, where exact speeds are required, please consult Seaparks Company. The given nominal motor speed can deviate by 10%. Belt speed as specified in the Amroll catalogue and on the motor label is the calculated speed at rated diameter and full load.
[SEAPARKS COMPANY]
We built a strong team of professional who dedicated to research&development, sales, production and shipping.
1.Pre-sales service
If the seller or user needs to ensure whether the product is adapt to the particular conditions.
Guidance is available from our customer service department, We welcome any specific questions via fax, phone or e-mail anytime.
2.Production
1.)Confirm the details of products(such as diameter,power,voltage,belt speed and so on)with clients when the order confirmed by clients.
2.)Tracking the production process, real-time update production progress and make sure the fast delivery.
3.After-Sales Service
1.)If the product has any quality problem, you can contact us,we will give you a satisfactory answer and try our best to solve your problem.
2.)Update the products information and newest price to clients when we built business relationship.
[COMPANY INFORMATION]
Seaparks company has provided "AMROLL" drum motors to the material handling industry for many years. Since its first drum motor was assembled in 2002, seaparks has adhered to a key principle: top quality and low price.
Seaparks was established in 2002 and the factory is located in Tianjin of China covering 6,000 m².At this site, Seaparks employs a team of experts and enthusiastic workers who make use of highly advanced machinery.
By making consistent investments in factory automation over the past years, the manual lathes, milling machines and other equipments gave space to high technology CNC equipments. This state of the art equipment is used to produce high precision parts for our "AMROLL" drum motors.
Any demand,pls contact us anytime.
Seaparks(Tianjin) Machinery-Electronics Co.,Ltd
Add: Xianghe Road, Science & Technology Park, Beichen District, Tianjin,China
Our website: http://www.made-in-china.com/showroom/seaparkssd/
Contact with Shirley