Basic Info.
Transport Package
Regular Packing Box
Product Description
Product Description
This is a high-performance 2.4G 4-zone RGB LED touch remote controller, which is adopting the most
advanced PWM control technology, controlling all RGB LED products with 4 lines and 3 circuits (common
anode), and owning 640 thousand colors and 9kinds of automatically change modes to choose.
Also, It has the memory function (that is to say, the previous settings will be resumed when power on again). It
is widely used in LED RGB strip light, LED module and so on. With the technology of the 2.4G high frequency
wireless remote control, it has the characteristics of low power consumption, long distance transmission, and
strong anti-interference ability, high speed telecommunications, etc.
The remote control can be divided into four groups to control, either alone, can also be unified control. And it
looks fashionable and elegant, with simple and practical functions of color changing and brightness dimmable,
the capacitive touch screen design makes the remote easy to use.
Technical Parameters
Working temperature: -20-60ºC
Input voltage: DC12V~24V
Output: 3 circuit
Connection mode: Common anode
Controller size: L85×W45×H22mm
Net weight: 115g, Gross weight: 125g
Static power consumption: <1W
Output current: <6A/ch
Output power: 12V:<216W, 24V:<432W The remote parameter Items | Parameter | Remark |
Supply Voltage | 3V | 2* AAA battery |
Transmission frequency | 2400-2483.5MHz | |
Modulation method | GFSK | |
Transmission power | 5db | |
Standby power consumption | 10uA | |
Remote control distance | 20-30m | |
External dimension | 120*52*20mm | |
Function information:
1. Use the 2.4G radio frequency wireless to control, it no need to point at controller, can around the obstacles
to control.
2. About 20-30m empty remote control distance.
Programming (code matching and code clearing):
Code matching:
For a new kit (remote & controller), the remote can work only when it is programmed to the controller.
Please follow the below instructions:
Confirm it is correctly connected between power supply, LED controller and LED load, select need to group controller. Cut off the power supply, after 10 seconds connect power supply,Within 3 seconds , click on the corresponding key" Grouping lamp ON" , the lights "slowly flash 3 times" is for matching groups successfully. Repeat the above steps for other groups of light to carry on the corresponding group.
Code clearing:
The code can be cleared as needed. The kit (remote & controller) will stay in the original state after code
clearing, and it can work again when code rematching is done. Pleases follow the below instructions:
Confirm it is correctly connected between power supply, LED controller and LED load. Switch off the power, after ten seconds, switch on again. After turning on the power supply, long press the "ALL ON" button or corresponding "Grouping lamp ON" , the strip light " quickly flash 9 times" is for clearing successfully. Then the operation of the regrouping method is the same as above "Code matching" points.
The night white light and Fast switching white light pattern:
The night white light -- Normal electricity lone press the "ALL OFF" button , then all lights will be set to the night white light pattern at the same time. Lone press "Grouping lamp OFF" button ,then the corresponding group light is set to the night white light. The night white light is the 2‰ brightness of the white light maximum brightness.
Fast switching white light -- Normal electricity lone press the "ALL ON" button ,then all lights will be switched to the white light pattern at the same time. Lone press "Grouping lamp On" button ,then the corresponding group light is switched to the white light.
Cautions:
1. This product only use on supply voltage DC12-24V, do not input on other voltage.
2. The lead wire shall be according to the wiring diagram of the color and label, connect correctly.
3. This product cannot be overloaded.
4. Please keep your finger away from the touch ring when installing the batteries, to improve its sensitivity, and to use the remote (3 seconds later) after the batteries are installed. Please reinstall the batteries, if the touch ring is found low-sensitivity.
5. Do not put the controller in a wide range of using metal area, or near a strong electromagnetic wave area, otherwise it will seriously affect the communication distance.
Address:
3rd Floor, Building C, No. 2, Ximen Industrial Zone, Minsheng 3rd Road, Liukeng, Baoyuan Community, Shiyan Street, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Consumer Electronics, Lights & Lighting
Company Introduction:
Shenzhen Senchuangming Technology is a company dedicated to the sales and export trade of RGB controllers, DMX512 decoders, RF wireless radio frequency touch controllers, phantom color controllers, amplifiers, dimmers and other LED smart lighting products. With more than 10 years of industry experience, Always adhering to the service tenet of honesty and customer first, Strive to bring products and services at fair prices and value-for-money to more global needs.