Single Fiber 1310nm Media Converter

Overview
BC-100D Series adaptive Ethernet media converter can interconvert the electric signal of 100Base-TX twisted pair cable and optical signal of 100Base-FX. It extends the network transmission range from 100m to 100Km (single mode optical fiber). Its typical application is Ethernet long range interconnection, such as the interconnection between the equipment room of community with MAN. No configuration of the switch is needed during connection due to the adaptive function. The newly added lightning protection function guarantees the safety of the equipment. There are outside power supply, built-in power supply optional, AC220V, DC 48V optional.
 
Feature
Adaptive
1.BC-100D provides the adaptive function of 10/100M rate and full/half duplex, significantly protects the existing network investment during network upgrade
Mass buffer
2.Unique buffer technology ensures the excellence of your network in data transmission and multimedia application the buffer is 2M.

Performance
Main features In conformity with the following
1.EE802.3 10Base-T standard
2.IEEE802.3U 100Base-TX/FX standard
3.IEEE802.3X standard
Interface transmission rate
1.Optical interface 155Mbps
2.Electrical interface 10/100Mbps
3.Automatic identification with cross line and through line
4.BC-100D can use either cross line or through line for connection with the devices such as switch or server.
5.TX LINK/ACT lamp "On" indicates the correct interconnected link

Duplex supportive
1.BC-100D Series supports full/half duplex adaptive and 10/100M adaptive
Network cable
1.10/100Base-TX UTP 5
2.100Base-FX single mode fiber 8.3/125,8.7/125,9/125 or 10/125μm
3.Multimode fiber 50/125, 62.5/125 or 100/140μm
 
 
Optical interface feature
 
Wavelength
1.1310nm(single mode 25km,40km,60km)
2.1550nm (single mode 80km, 100km)
3.1310/850nm (multimode 2km) LED display
4.PWR power indicator lamp
5.FX LINK/ACT optical link connecting/ active status indicator lamp
6.TX LINK/ACT electrical link connecting/ active status indicator lamp
7.FX100 optical interface rate indicator lamp
8.TX100 electrical interface rate indicator lamp
9.FDX full/half duplex indicator lamp

Power requirement
1.Outside power supply 5VDC 1A
2.Power consumption les than 5W
3. Built-in power supply 220VAC, -48VDC
4.Power consumption less than 5W
Interface configuration
1.One RJ45 10/100Base-TX interface
2.One SC/ST/FC single/multi mode duplex connector
Dimensions
1.Outside power supply 26mm×71mm×94mm
2.Inside power supply 30mm×115mm×175mm

Environmental requirement
1. Operating temperature range 0°C~60°C
2. Storage temperature range -40°C~85°C
3.Relative humidity 5%~90%
 
Ordering Information