Basic Info.
Structure
Double Decker Bus
Emission Standard
Zero Emission
Transmission Type
Automatic
Specification
11M, double-decker
Product Description
Model information | Announcement model | CDK6110CSBEV | Fuel type | Pure electric |
Announcement batch | 309 batches | Recommended directory | Batch 7 in 2018 | |
Exempt catalog | 19th batch | | | |
| | | | |
Basic parameters | Body size length * width * height (mm) | 10800*2550*4180 | | |
Curing quality (kg) | 12400,11710 | Approach / departure angle(.) | 8.5/11 | |
Maximum total mass (kg) | 18000 | Minimum turning diameter (m) | 22 | |
Front overhang / rear overhang (mm) | 2500/2100 | Wheelbase (mm) | 6200 | |
Track front/back (mm) | 2120/1890 | Number of guests | 86,96 | |
Maximum speed (km/h) | 69 | Step type | First step | |
Three-electric system | Electric drive system | Permanent magnet synchronous motor TZ420XSCD1, rated power 100kw, peak power 250 kw | | |
Energy storage system | Lithium iron phosphate battery, total storage capacity 287.96kwh, energy density: 141.8wh/kg | | | |
Voltage platform | 531.3V | Nominal capacity | 542Ah | |
Cruising range (equal speed method) | 520km | Charging rate | 1C | |
Charging time | 1.5h/526V | Charging mode | Slow charge | |
Vehicle parameters | | | | |
| project | Basic parameters | | |
Chassis | Chassis model | Carrier | | |
Front axle | Domestic bridge, axle load 6.51t | | | |
Rear axle | Domestic bridge, axle load 11.49t (speed ratio 6.14) | | | |
Tire | 275/70R22.5 | | | |
steering system | Integral power steering | | | |
Braking System | Front and rear independent double circuit air brake and spring energy storage parking brake, auxiliary regenerative braking, ABS | | | |
Suspension system | Air suspension | | | |
Body | skeleton | Full load high-strength steel pipe skeleton, vehicle cathodic electrophoresis | | |
Passenger door | Right front and center electronically controlled pneumatic inner swing door; left middle emergency door; manual wheelchair guide at right middle door, wheelchair area and fixed and protective facilities | | | |
Side window | Built-in sliding window, bonded structure, transparent roof glass | | | |
Front windshield | Panoramic laminated safety glass | | | |
Rear windshield | Panoramic tempered glass | | | |
Safety top window | 1 transparent safety top window | | | |
Trailer hook | Front trailer hook | | | |
Interior | floor | Floor and stair treads in the car are made of PVC floor coverings | | |
armrest | Stainless steel handrail; handrail at the middle door | | | |
Air conditioning duct | Segmented molding, surface softening and leather | | | |
dashboard | Overall molding | | | |
Interior wall panels and interiors | Multilayer board surface softening and covering | | | |
Driver's chair | Up and down, front and back, backrest angle adjustable, with three-point seat belt. | | | |
Passenger chair | 44 seats (optional 28-64 seats), with 86,96 guests. High by soft seat, color and interior overall match | | | |
rearview mirror | Rod type (electric defrosting), right side matching blind mirror | | | |
Fire extinguisher | 2 4kg manual fire extinguishers on the first floor and 2 4kg manual fire extinguishers on the second floor; Battery compartment and rear compartment are equipped with self-contained fire extinguishers. | | | |
Toolbox | 1 integrated toolbox (with medical kit) | | | |
safety hammer | 4 electronically controlled glass breakers according to standard requirements | | | |
trash can | One stainless steel trash can on the upper and lower floors | | | |
Sunshade | Lower left front sunshade, driver side sunshade | | | |
Electric appliance | Electronic street sign | LED electronic street sign, front and rear side layout | | |
Battery | 6-QA-195, two | | | |
Car light | LED type lamp, left and right through | | | |
Inspection light | Rear cabin inspection light, rear door proximity switch | | | |
air conditioning | Pure electric inverter air conditioner; equipped with air purification system, fresh air system | | | |
Defrost system | High voltage defroster | | | |
Wiper | Panoramic pair of scraping, with spray | | | |
meter | CAN bus, full color whole liquid crystal display instrument | | | |
Flame retardant line | 125 ° C irradiation flame retardant line, line set number | | | |
Drive recorder | Configuration | | | |
other | Reserve IC card swipe machine, slot machine, GPS car machine, video surveillance car, mid-door and reversing monitoring and monitoring head harness and position, new energy monitoring vehicle terminal; | | | |
other | Three-electric system warranty | Warranty 8 years | | |
| | | | |
Our Advantages
1,Unique design, large capacity, low entrance
2,The only upper layer is connected with the transparent glass in China to improve the tourist comfort
3,The appearance of the panda bionic design has a design patent
4,Low entrance, convenient for passengers up and down
5,Dynamic site information LED display to provide better service for passengers
6,Auxiliary driving system, 4G video monitoring system, 360 monitoring system, high-definition video camera with night vision function, providing security for drivers and passengers
Address:
Add: 26th Floor, West Tower, Hunan Chamber of Commerce Mansion, Furong Middle Road, Yuhua District, Hunan China, Changsha, Hunan, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Sunda New Energy Technology Co., Ltd was established in September 2014 with a registered capital of RMB 148.18 million. Technically supported by the School of material engineering of Central-South University, Sunda focus on R&D and manufacture of EV power battery pack, battery management system(BMS), EV charging piles(AC OR DC), construction and operation of charging station, distribution and operation of all kinds of new energy vehicles.
The factory is located in high-tech zone, Huaihua, Hunan, which has an area of 19, 000 square meters. Our plant has 1 DC charging piles production line with capacity of anual scale of 30, 000 sets and 2 automotive battery pack production lines. Moreover, we process battery cell and system testing equipment, laser beam welding machine and safety gauge testing facilities. Last but not the least, we successfully passed ISO quality system certification and possess our own property.