LED Panel Light

led panel light 

Quick Details
Light Source: LED
Item Type: Panel Lights, led panel lights
LED Light Source: SMD4014 (Sanan), 0.2W/PCS
Warranty(Years): 3
Input Voltage(V): AC85-265V
Lamp Power(W): 12
Lamp Luminous Flux(lm): 900
Lamp Luminous Efficiency(lm/w): 75
CRI (Ra>): 75
Color Temperature(CCT): Warm White
Working Temperature(ºC): -20 - 40
Working Lifetime(Hour): 50000
Lamp Body Material: Aluminum
IP Rating: IP44
Certification: CE, RoHS
Place of Origin: Guangdong, China (Mainland)
Brand Name: L.I.O.N led panel light, l.i.o.n
Model Number: APL-PB-2501
power: 12W
Led source: SMD 2835
Led Qty: 60*0.2
Product size: Dia 170*H25
Open size: Dia 155
Housing Color: white
CPI: >75
Power Factor: 0.5
Packaging & Delivery
 
2015 hot sale ceiling led light,surface mounted led panel light 
 
 
Specifications
 
1)Ultra thin and super bright 
2)AC85-265V wide voltage 
3)Aluminum material 
4)CE,ROHS certificates
 
Embedded panel light with Aluminum from guangdong zhongshan    www.made-in-china.com/showroom/suzy520713 led panel light

LED panel light is produced by the light-emitting diodes as a light source the production of a new commercial lighting products, its service life up to 50,000 hours or more, the size is the same to traditional fluorescent light lamp panel specifications, can be installed directly on the ceiling, It's safety regulations and electromagnetic compatibility. installation is simple and convenient.
 
LED panel light Technical parameters:
 
 
 
LED Panel Light Features:
Green Illumination: There is no harmful metals such as mercury, lead and so on, no flicker and fast start in working, No produce ultraviolet light when luminescence, No attract mosquitoes, No damaged for frequent switching.
 
Safe, efficient: Adopt wide voltage and wide frequency constant-current topology isolation circuit design for power supply, small size, with low noise, low temperature, high efficiency, high power factor, energy saving, environmental protection, security, long lifespan. there is protection in open circuit, short circuit, overload and lighting surge. light guide plate and diffuser plate are adopted japan mitsubishi PC diffuser, light transmittance is above 82%, Emitting surface is bigger than 92%, the light is soft and without glare.
 
Excellent heat: Ultrathin gear-shaped exterior design, aluminum die casting forming shell surface of the electrostatic spraying, This design of effective use of the lamp body contours and surface Process, effectively increasing the cooling area to improve the thermal conductivity of the shell surface of the LED surface temperature lower, more stable performance and longer life.
 
Long lifespan: Introduce the advanced thermal management technology of LED from Japan. The light decay of Josun products is very low and the lifespan is above 50,000 hours.
 
Applications:
Hospital,Phamaceutical factory
Conference / Meeting rooms 
Factories & Offices  
Commercial Purposes 
Residential / Institution Buildings
Schools, Colleges & Universities
Hospitals
Other Lighting
 
 
Installation Instruction : 
1. First need to install skeleton on the location of the LED panel lights,This skeleton size must be matched with the panel lights and the skeleton loading capacity to achieve more than 3KG,Otherwise the installation will be not loaded into or It's too loose, easy to fall off rather than security;
 
2. Connect the power supply wires to panel lights power on the install position of the panel lights;
 
3. Connect the DC output female connector of power to the DC input male connector of panel light,Attention must be inserted in the end;
 
4. after installed as the position, should be clear around 50mm around the power and outside the light

Notices :
 
1. The size of lifting skeleton must be consistent with the product, otherwise it wouldn't be installed or too loose to secure.
2. The skeleton of lights installed must use the traction line lifting and loading capacity must be more than 5KG.
3. The wire must be passed 3C certification of two core cable, To reduce the risk of fire hazard.
4. Wire copper is not exposed outside of the power terminal holes,To avoid a short circuit or get electrocuted.
5. Put the driver in the safe and reasonable position to be to facilitate the replacement or maintenance, After panel lights installed into the loaded position, To forbid having other stuff 50mm around panel light shell.
6. Installation should pay attention to disconnect the input gates, to prevent electric shock.
7. Non-professionals not allow to open the power box, and maintenance.


Contact :Suzy Ly
What's App:+86 13169308819
Email:gzb@liyinled.com
Skype:gzb@liyinled.com