Gas Vents
| FOB Price: | US$2.20-120.00 / Piece |
|---|---|
| Min. Order: | 1 Piece |
| Min. Order | FOB Price |
|---|---|
| 1 Piece | US$2.20-120.00/ Piece |
| Payment Terms: | T/T, Paypal, Western Union |
|---|
Product Description
Company Info
Product Description
Material: 2Cr16-T
Size: 50*50*50 75*75*30 D4-D28
Hardness: HRC35-40
The gas vent can save up your cost and time
In order to achieve its maximum molding productivity, simply using its ultra micro breathing cell to exhale gas and air from molds.
Key problems to be solved;
1. Burnt:
When aberration and burnt issues occurred for resin filling faster than air exhaling, it would result gas vent overheated.
2. Overflow
There are 2possible conditions:
. When temperature of resin gets higher at the tip seaming, it weakens its bonding strength.
. When temperaure of resin gets higher at the tip of seaming, it weakens its bonding strength.
. Air can fllled up the path and blocks resin to flow functionally which will cause ejection pressure to rise and materiais to overflow.
3. No enough fillings:
4. Cell Streak:
If there are some cells, streaks and mottles occurred, it is caused by the tact that the cells have not been vaporized completely between air and resin.
5. Extensive Cycling Time:
The higher temperature of resin, molds and slower speed of injection cause extensive cycling time, however, it will not affect the quality of final products.
Energy, Time, and Cost Saver:
1. It will reduce the trial die, time and materials if users consider to use TX gasvent the beginning of the design.
2. It will save up to 1/3 to 1/10 of the total cost and time if installing gas vent.
Installation:
1. Do not touch the surface when gas vent is in use.
2. Use H7/S6 from JIS reference chart.
Size: 50*50*50 75*75*30 D4-D28
Hardness: HRC35-40
The gas vent can save up your cost and time
In order to achieve its maximum molding productivity, simply using its ultra micro breathing cell to exhale gas and air from molds.
Key problems to be solved;
1. Burnt:
When aberration and burnt issues occurred for resin filling faster than air exhaling, it would result gas vent overheated.
2. Overflow
There are 2possible conditions:
. When temperature of resin gets higher at the tip seaming, it weakens its bonding strength.
. When temperaure of resin gets higher at the tip of seaming, it weakens its bonding strength.
. Air can fllled up the path and blocks resin to flow functionally which will cause ejection pressure to rise and materiais to overflow.
3. No enough fillings:
4. Cell Streak:
If there are some cells, streaks and mottles occurred, it is caused by the tact that the cells have not been vaporized completely between air and resin.
5. Extensive Cycling Time:
The higher temperature of resin, molds and slower speed of injection cause extensive cycling time, however, it will not affect the quality of final products.
Energy, Time, and Cost Saver:
1. It will reduce the trial die, time and materials if users consider to use TX gasvent the beginning of the design.
2. It will save up to 1/3 to 1/10 of the total cost and time if installing gas vent.
Installation:
1. Do not touch the surface when gas vent is in use.
2. Use H7/S6 from JIS reference chart.
Address:
Booth No. 48 1-3 Floor Jintian Garden Dongshen Road Changping Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Individuals/SOHO
Business Range:
Manufacturing & Processing Machinery
Main Products:
Mould Component, Date Marked Pin, Parting Lock, Air Poppet Valves, Gas Vents, Ejector Pins
Company Introduction:
Shenzhen Threeup Mold Fittings Co., Ltd. was established in 2000. A professional plastic mould component manufacturer in China, Threeup has always insisted on "highest quality, technique and service" as our principle from the very beginning. Most of our product designs come from our Taiwanese mould component engineer who has decades of experience. Compared with the same kinds of products, ours have many characteristics such as precision, easy operation and more humanized features.
With the development of the mould market, Threeup makes high quality mould components according to worldwide standards, such as CUMSA, DME, HASCO, and Misumi. Our products include date indicator, mould counter, air poppet valve, ejector pins, air vents, parting locks, slide retainers, heat pipes and related products.
According to our good team work and the great support from all the customers, THREEUP has developed to be a limited liability company which was provided with integrated product, supply and sale system. At the same time our business also expands from Shenzhen City to the whole country and other countries. Such as Singapore, India, Europe, USA, South-American etc.
With the development of the mould market, Threeup makes high quality mould components according to worldwide standards, such as CUMSA, DME, HASCO, and Misumi. Our products include date indicator, mould counter, air poppet valve, ejector pins, air vents, parting locks, slide retainers, heat pipes and related products.
According to our good team work and the great support from all the customers, THREEUP has developed to be a limited liability company which was provided with integrated product, supply and sale system. At the same time our business also expands from Shenzhen City to the whole country and other countries. Such as Singapore, India, Europe, USA, South-American etc.
