Basic Info.
Usage
Camping, Home, Car, Boat
Power Supply
18650 Battery or Cr123A Battery
Switch
Back Push (on/off)
Charging type
Nonrechargeable
With Light Source
With Light Source
Battery Type
Lithium Battery
Material of Reflecting cup
Metallic
Surface Preparation of Reflecting cup
Concave-convex
Certification
CE, RoHS, ISO
Beam Distance
1000 Meters
Product Description
DESCRIPTION
The M3XS-UT offers up to a full kilometer of beam distance and features a large diameter reflector with a dedomed Cree XP-L High Intensity LED. The light has three brightness levels from 3 to 1200 lumens plus a strobe mode. The M3XS-UT is powered by 3 x CR123A Lithium batteries. When the light is assembled with the extension tube, it can be powered by 4 x CR123A or 2 x 18650 batteries (with protection board). The M3XS-UT retains the tail cap switch design from the M3X for tactical operation, with an added side switch on the head of the flashlight that will allow for easy mode switching. The tail cap of M3XS-UT is a brand-new conductive stretch that keeps the light energized even when the tail cap is loosened accidently.
FEATURES
Cree XP-L High Intensity LED, color temperature:4000K~4500K
Light output ranges from 3 Lumens to 1200 Lumens, Maximum beam distance up to 1000 meters, and a maximum
Run Time of 360 hours.
3 output modes, plus a moonlight and strobe mode. When the light is on burst mode, the brightness level at 1200lm
(5 minutes) ramps down by 60% of the initial light output (55 minutes). 600lm/1.5hrs, 80lm/12hrs, moonlight 3lm/
360hrs, 10Hz strobe mode
The light is powered by 3 x CR123A Lithium batteries. When the light is assembled with the extension tube, it can be
powered by 4 x CR123A or 2 x 18650 batteries (with protection board).
A brand-new conductive stretch tail cap keeps the light energized even when the tail cap is loosened accidently.
The tail switch diameter is 18mm. The tail switch has a momentary ON-OFF functionality, supporting high output and
strobe mode at the same time. The light brightness level and strobe mode can be activated through the side switch.
99% light transmittance rate through tempered glass, with two-sided anti-reflective coating.
Built in thermal management safety program that limits the high output to 5 minutes and then gradually ramps down
high output by 60% after 3 minutes of constant on
Reverse polarity protection to prevent improper battery installation
Side switch featuring a battery power indicator glows red and blinks when the power runs low. When the battery power
indicator is constantly on, the battery will run out of power and will shut the light off
Able to place upside down on a flat surface
IPX8 water-proof capability
LENS
Tough ultra-clear tempering glass with
anti-reflective coating
LIGHT SOURCE
1 x Cree XP-L High Intensity LED
DIMENSIONS
Length: 8.3 in / 211mm
Bezel Diameter: 2.48 in / 63mm (head);
0.98 in / 25mm (body)
Weight: 9.0 oz / 255 g (excluding batteries)
BODY MATERIAL
Aircraft-grade aluminum body with anti-scratch
type III hard anodizing
BATTERY SOURCE
3 or 4 x CR123A
2 x 18650
All performance claims to ANSI/NEMA FL1-2009 Standard. Made in China.
© Olight 5/7/15
WARRANTY
Olight's 5 Year warranty.
Visit olightworld.com/warranty
Address:
2/F East, Building a, B3 Block, Fuhai Industrial Park, Fuyong, Bao′an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Light Industry & Daily Use, Lights & Lighting, Security & Protection
Management System Certification:
ISO 9000
Company Introduction:
Olight was established in 2006 as a manufacturer of high quality illumination tools. After breaking out in the outdoor and flashlight enthusiast markets in Europe, Olight turned its focus on to the tactical market and began designing products tailored to meet the needs of law enforcement and government agencies. Our M series lights pushed the envelope of light output, features, and durability, solidifying our reputation and position in the marketplace. Not content to rest on our laurels, we continued to innovate with our powerful SR line of searchlights and the X6 Marauder. Our product line has expanded to include models powered by CR123A lithium batteries, standard AAA and AA alkaline batteries, and convenient rechargeable battery packs. We continue to deliver cutting-edge products and are committed to keeping Olight a forerunner in the illumination tool market — Providing products that are accessible to everyone. We believe that, with your support, our future will be brighter than ever.