Basic Info.
Product Description
Specifications of oil field used ceramic proppant
1. High crushing strength
2. Fracturing
3. High flow conductivity
4. Widely used in the exploration of Oil&Gas wells
Oil fracturing proppant is one kind of ceramic particle product with high intensity resistance, mainly used for underground support to increase production of oil and gas.
The main raw materials of oil fracturing proppant are hig quality bauxite, coal etc. By ceramic sintering processing, oil fracturing proppant is a perfect substitute of natural quartz sand, glass ball, metal ball ect such low intensity materials, has good effect in increasing output of oil and natural gas.
When deep drilling Oil and natural gas, ore deposit has been fractured by the high pressure and low permeability. Oil and gas spew out from the rock bursted of cracks, the cracks would not close due to the stress release when high aluminium support materials with high pressure solution has been filled into the cracks of rock fissured, and so as to maintain high flow conductivity, and keep the high output of oil and gas. It has been proved by experience that it could improve the yield 30-50% by using oil fracturing proppant, and can also prolong service life of oil well, it's the key material in low permeability oil deposit exploitation and construction.
According to variety classification could be divided into:
1) sand prevention proppant-no pressure consolidation proppant, high strength, good consolidation speed, good permeability, low density.
2) overpressure resistant proppant-good anti-spit consolidation, high strength, low permeability, low broken ratio, low density.
3) Coating proppant-excellence quality in overpressure resistant capacity, can be used for a long time in the lower strata below 232° C.
4) Quartz proppant-low solubility in acid solution, suitable for fracturing acidification proping, have higher sphere angle and flow conductivity.
According to breakage strength could be divided into:
52Mpa(7500psi), 69Mpa(10000psi), 86Mpa(12500psi)
According to the volume density could be divided into:
Low density, medium density, high density,
According to the size could be divided into:
12-20 mesh, 16-20 mesh, 16-30 meshes, 20-40 mesh, 30-50 mesh, 40-60 mesh, 40-70 mesh, 70-100 mesh etc.
In order to satisfy the demand of oil company both at home and abroad, our company has been developing more different intensity and specification products for our customers.
Low Density High Intensity Proppant |
|
|
|
Physical Property: |
Size |
Properties |
16/20 |
20/40 |
30/50 |
40/70 |
Density g/cc |
Apparent density (g/cc) |
≤ 2.85 |
≤ 2.85 |
≤ 2.85 |
≤ 2.85 |
Bulk Density (g/cc) |
≤ 1.62 |
≤ 1.62 |
≤ 1.62 |
≤ 1.62 |
Sphericity |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
Roundness |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
Turbility NTU |
80 |
80 |
80 |
80 |
Acid solubility (12%HCL+3%HF)% |
≤ 6 |
≤ 6 |
≤ 6 |
≤ 6 |
Crush resistance % |
52MPa |
≤ 10 |
≤ 5 |
≤ 3 |
≤ 3 |
69MPa |
≤ 12 |
≤ 10 |
≤ 7 |
≤ 5 |
Solubility in Water |
Insoluble |
|
|
|
|
Appearance & Odor |
Appearance of black or brow in granules. |
Other Property: |
Flash Point |
Non flammable |
Reactivity Stability |
Stable |
Toxcity: |
Oral |
This material is not toxic. |
Dermal |
This Material is not an irritant w hen applied to the skin. |
Health Hazard Data |
Inhalation |
Dust may cause respiratory tract irritation on prolonged contact. |
Eye contact |
May cause irritation on contact. |
Emergency and First Aid Procedures |
Inhalation |
Remove affected person from source of exposure. Get medical attention if irritation persists. |
Ingestion |
No treatment is necessary unless large quantities are ingested. Seek medical advice if large quantities are ingested. |
Eye Contact |
Immediately flush eyes w ith large amounts of w ater. Get medical attention if irritation persists. |
Skin Contact |
Wash the affected area w ith soap and w ater. Get medical attention if irritation persists. |
Medium Density High Intensity Proppant |
|
|
|
Physical Property: |
Size |
Properties |
16/20 |
20/30 |
20/40 |
30/50 |
Density g/cc |
Apparent density (g/cc) |
≤ 3.30 |
≤ 3.30 |
≤ 3.30 |
≤ 3.30 |
Bulk Density (g/cc) |
≤ 1.78 |
≤ 1.78 |
≤ 1.78 |
≤ 1.78 |
Sphericity |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
Roundness |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
Turbility NTU |
80 |
80 |
80 |
80 |
Acid solubility (12%HCL+3%HF)% |
|
≤ 7 |
≤ 7 |
≤ 7 |
Crush resistance % |
69MPa |
≤ 10 |
≤ 7 |
≤ 5 |
≤ 3 |
86MPa |
≤ 15 |
≤ 12 |
≤ 8 |
≤ 6 |
100MPa |
|
|
≤ 10 |
≤ 8 |
Solubility in Water |
Insoluble |
Appearance & Odor |
Appearance of black or brow in granules. |
Other Property: |
Flash Point |
Non flammable |
Reactivity Stability |
Stable |
Toxcity: |
Oral |
This material is not toxic. |
Dermal |
This Material is not an irritant w hen applied to the skin. |
Health Hazard Data |
Inhalation |
Dust may cause respiratory tract irritation on prolonged contact. |
Eye contact |
May cause irritation on contact. |
Emergency and First Aid Procedures |
Inhalation |
Remove affected person from source of exposure. Get medical attention if irritation persists. |
Ingestion |
No treatment is necessary unless large quantities are ingested. Seek medical advice if large quantities are ingested. |
Eye Contact |
Immediately flush eyes w ith large amounts of w ater. Get medical attention if irritation persists. |
Skin Contact |
Wash the affected area w ith soap and w ater. Get medical attention if irritation persists. |
High Density High Intensity Proppant |
|
|
|
|
|
|
|
|
|
Physical Property: |
Size |
Properties |
12/20 |
16/20 |
16/30 |
20/40 |
Density g/cc |
Apparent density (g/cc) |
≤ 3.40 |
≤ 3.40 |
≤ 3.40 |
≤ 3.40 |
Bulk Density (g/cc) |
≤ 1.90 |
≤ 1.90 |
≤ 1.90 |
≤ 1.90 |
Sphericity |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
Roundness |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
≥ 0.9 |
Turbility NTU |
80 |
80 |
80 |
80 |
Acid solubility (12%HCL+3%HF)% |
≤ 6 |
≤ 6 |
≤ 6 |
≤ 6 |
Crush resistance % |
52MPa |
|
|
≤ 5 |
|
69MPa |
≤ 8 |
≤ 7 |
≤ 7 |
≤ 4 |
86MPa |
|
|
|
≤ 7 |
Solubility in Water |
Insoluble |
Appearance & Odor |
Appearance of black or brow in granules. |
Other Property: |
Flash Point |
Non flammable |
Reactivity Stability |
Stable |
Toxcity: |
Oral |
This material is not toxic. |
Dermal |
This Material is not an irritant w hen applied to the skin. |
Health Hazard Data |
Inhalation |
Dust may cause respiratory tract irritation on prolonged contact. |
Eye contact |
May cause irritation on contact. |
Emergency and First Aid Procedures |
Inhalation |
Remove affected person from source of exposure. Get medical attention if irritation persists. |
Ingestion |
No treatment is necessary unless large quantities are ingested. Seek medical advice if large quantities are ingested. |
Eye Contact |
Immediately flush eyes w ith large amounts of w ater. Get medical attention if irritation persists. |
Skin Contact |
Wash the affected area w ith soap and w ater. Get medical attention if irritation persists. |
Address:
18 Road Shengming, Dd Port, Dalian, Liaoning, China
Business Type:
Manufacturer/Factory, Other
Business Range:
Chemicals
Company Introduction:
Founded in 1995, wenda has transformed from a trading company into a total solution provider with strategic sourcing, quality assurance and supply chain management capabilities.
We specialize in food ingredients, pharmaceuticals and cosmetic raw materials, chemical for diversified industries, such as rubber and plastic processing, paints and coatings, water treatment, detergent, oil and gas processing etc...
We focus on optimizing resources to save cost and redundant efforts, on making best use of timely and accurate information to help secure stable supply while consistently providing quality products through our uniquely designed total quality assurance program. In light of ever increasing challenges to Chinese manufacturers, such as energy and environment related issues, wenda has started seeking for sustainable development strategy and longer term solutions together with our suppliers. Meanwhile, wenda is also well poised to explore new supply sources globally by applying and adapting its well-proved supply chain management system.
On the way to our organic growth, wenda has spotted a new demand trend from the customers and industries we currently serve. Thus, a new business unit is recently set up to extend our supply chain management services to various manufacturers overseas seeking for one-stop solution for their machineries and part supply needs. Through this new establishment, a framework of the wenda is thus structured which includes the following strategic business units:
Food & nutritional ingredients
Industrial chemicals
Pharmaceuticals cosmetics raw materials