Basic Info.
SD Card Memory Size
8640 Units
Measuring Medium
Temperature
Specification
range -30~70C
Product Description
Model: TMP-10D with LCD display
These data loggers can measure and store up to 8,640 temperature readings.
User can plug data logger straight into PC's USB port without any cables. Before getting started, user needs to install software provided, setup sample rate (from 2 s to 24 hours), high/low alarm limit. When goods arrive in destination along with loggers, it could be connected to PC, and , user could get a PDF report directly.
Advantages
1. High accuracy industrial grade RTC temperature chips
2. Customized settings (set on your own PC)
3. LED alarm
4. Start or Stop by button, easy for use
5. PDF report directly
6. Records won't lost if battery exhausted
7. Customization & Logo service! welcome to contact check with us
Applications
These data loggers are mainly used in monitor and verify temperature-sensitive goods, equipment or areas.
For example:
Cold Chain Refrigeration Transportations HVAC Food & Pharmaceutical Warehouse
Laboratories Aircraft cabins Agriculture and Livestock Environmental monitor
Technical Details:
Aspects | Specification of PDF temperature data recorder |
USB port | USB2.0 |
Range & Accuracy | -30~70°C, ±0.5°C, with reading resolution 0.1°C |
Capacity | 8640 units |
LCD screen | YES |
Alarm | LED alert |
Ambient environment | -30~70°C,0~100%RH |
Storage environment | 10~50°C,20~60%RH |
Recording interval | 2s~24h, configurable |
Power supply | Button battery (work for about 1 year) |
Protection | IP54 |
Following settings configuration could be supported on PC software on your own: |
1. Threshold value | 2. Temperature unit: C or F? |
3. Boot delay | 4. Alarm delay: ?min |
5. Logging interval | 6. UTC time zone |
7. Capacity: 8640 or more? | 8. Battery life: 1 or 2 years? |
9. Logo service | Free for MOQ 500units |
How to use this reusable temperature PDF recorder ?
STEP 1: set
Open box and connect the datalogger to PC, run the software for settings configuration.
Disconnect when step 1 is done.
STEP 2: start
Press and hold the <Start/Stop> button for about 5seconds, release it till the Green LED is lit on; LED light will be off in a few seconds, which means the temperature data recorder starts to work successfully.
Double Check: device runs well if the Green LED light on regularly every 30 seconds.
STEP 3: lay device
Put the device among goods or cooler box or other equipments to be tested
STEP 4: stop
Take out the recorder, hold down the <Start/Stop> button, release it until the Red LED is lit on, the device will stop working by this moment.
Pay attention to LED lights,
if the Red LED shrink, it means there was Critical temperature in records;
if the Green LED shrink, it means all records are normal;
STEP 5: get PDF report
Connect it to PC with USB2.0 port.
Green LED will shrink frequently, which means the PDF report is under preparation (it will need less than 15 seconds); and then user can find the PDF report from "My computer - U disk drive - PDF_DISK"
STEP 6: use for more time
New settings could be updated as per requirements from new applications.
So this is a Reusable Temperature Data Recorder's manual.
Answers to the Questions you may have:
1. What the Difference is between your wireles sensors & other transmitters?
Our products could work alone, saving wiring cost & on-site labor cost, reporting real-time data to server remotely.
2. What's the MOQ of it?
No MOQ limits, you can buy 1unit even.
3. Is OEM service OK?
Yes, while there may be qty and other limits. Come check with us.
4. Could FREE Samples be provided?
Yes, but cost should be paid at sample period, its cost could be refunded in big order.
5. How long the Quality Guarantee will be?
1 year after delivery.
6. Which Payment you support?
Incoterms: EXW, FOB, CNF
Payment methods: T/T, WestUnion, MoneyGram, Credit card, Paypal
Payment terms: 100% deposit, deposit + balance before shipment for big volume.
7. How would the devices be delivered?
Couriers usually: HKDHL, EMS, UPS, TNT, Aramex (it depends, may vary for different countries due to battery)
Air & sea transportation is optional for some cases.
** If you have warehouse or friend in China, we could also send goods to there.
8. How long could I receive goods?
**Lead time:
Devices would be prepared ready in 5 days.
**Time for transportation:
It will cost 3~5 days in domestic (then tracking number will come out) and 5~10 days for international (it depends)
9. How could I get a price and place order?
Following info. is needed: application usage, Range & Accuracy, other related parameters.
10. Do you offer any discount?
Yes, If you have big order quantity, please mail us with details for discount.
COUPON activity effective always:
Any clients who ordered from us can share us at-scene Application photos of our devices ( 5 shots at least), and enjoy a 5% discount (max 20$) in their next order.
Contact us
Your inquiries would be responded in 24 hours!
Welcome to contact with us for SAMPLES, CUSTOMIZATION / LOGO SERVICE!
Vicky Pey
mobile: 0086-158 2965 8572