Basic Info.
Water Circulation
Mixed Circulation
Burning Style
Internal Firing Boiler
Gas Flow Type
Water-Fire Tube
Product Description
The new high pressure steam injection unit with three-pass modular integration.
WB-YZG high-pressure steam injection unit is special equipment to produce viscous oil, injecting the produced high temperature and pressure wet steam into wells to heat the crude oil and lower its viscosity, so that it can increase the mobility of heavy oil and its recovery rate greatly. Therefore, the unit is widely used in the production of heavy and super-heavy oil with sophisticated technology, which has strong supports for producing high-yielding and high-quality oil.
WB-YZG high-pressure steam injection unit with three-pass modular integration, a new generation of acquisition equipment of heavy oil, increases efficiency of exploiting heavy oil.
The auxiliary device equips with a water treatment system which can provide qualified softening and deoxidizing water for the unit; The secure device equips with raw water and fuel storage and power control systems which can ensure the unit to run continuously and normally.
The operation is controlled precisely by full-automatic control system, moreover, the safety of unit is ensured by safety warning protection device and one-key-stop method.
WB-YZG high-pressure steam injection unit innovate traditional one-pass design to three-pass which increases 6.2% thermal efficiency, and obtains significant R&D achievements.
The first pass of the unit is laid in the middle of main body, and the furnace adopts membrane wall heating, so the coil bundle of water vapor heated evenly; The second pass is laid on the sides of the first one, using blank casing at front and finned tube at rear, staggered arrangement, stack gas brushes breadthwise, and the medium exchanges the heat in reverse flow so that it can increase endothermic performance of water vapor coil bundle and heat transfer efficiency; The third pass is laid above the first one adopting finned tube, staggered arrangement, stack gas brushes breadthwise, and the medium exchanges the heat in reverse flow so that it can maximally reduce the exhausted temperature.
The three-pass design improves the heated environment of water-vapor coil bundle and provides a more rational heat distribution. The reduction of stack gas space increases its flow rate which makes processing more smoothly and causes stronger heat exchange efficiency. At the same time, the second and the third pass are laid in the same annulus interval which controls the volume of product, and utilizes the first-pass faces unexposed to the fire effectively. This innovation improves the performance of the product.
It reduces the volume of products substantially and makes transportation convenient. Take truck-mounted unit for example, the rated steam output raises from 9.2t/h to 15.2t/h under the same conditions (16m length× 3m width× Height). In addition, the volumes of skid-mounted and shipborne unit with the same model can be reduced by 1/4.
WB-YZG high-pressure steam injection unit adopts modular process strictly abiding by ASME and API standard. The main device consists of modules of frame, first pass, second pass, third pass, water-water heat exchanger and etc. Modules can be fabricated, quality inspected and maintained individually which can be assembled as a whole package. Each module is connected by welding. It equips with upper and lower slideways and supports which can be pushed in and drawn out freely. Thus, the products can be maintained more convenient and has good practicability.
Address:
Dongying Economic Development Zone, Dongying, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 14001, ISO 9001, OHSAS/ OHSMS 18001
Company Introduction:
Dongying Wanbao Boiler Equipment Co., Ltd was founded in 2006. It has several subsidiaries in the areas of oil equipment, manufacturing, engineering, technologies, as well as trade. Its registration capital is RMB 500 thousand, with an annual revenue of more than RMB100 million. WANBAO holds license which allows installing and maintaining special equipments, and other certificates such as "China Special Equipment Installation and Maintenance License", "Class B boiler manufacturing License", "Pressure Vessel Design/Manufacturing License", "Ship Voyage Services License", "Packaged boilers and Pressure Vessel Installation License", etc. It has passed such international standards as ISO9001, ISO14001 and OHSAS18001, and was chosen by China National Petroleum Corp (CNPC) and China Petrochemical Corporation (Sinopec) as a preferred supplier. WANBAO has the capabilities in design, research and development, manufacturing along with relevant qualification and patented technologies. Main products are: Hot water boiler, steam boilers, thermal oil furnace, crude oil furnace, three-phase separators, heat exchangers, storage and transportation of crude oil. Full use of international cutting-edge CAD, CAM, CAPP and the flexible digital manufacturing technology, advanced sophisticated matching industrial equipment, application techniques skilled industrial workers, to create the extraordinary quality, excellent products. For the further development, we set up R & D center with continuous innovation. Meanwhile we have close cooperation with major universities and develop eight series products with more than sixty petroleum equipments which dramatically reducing the acquisition cost of crude oil and raise the thermal efficiency. We are proud our advanced technology has contributed to the new development of oil fields. Working together with our customers to create a better future!