Product Description
Company Info
Product Description
This furnace is composed by several parts, manufactured in the factory, assembled at worksite, conveniently and quickly.
1. It is adopted that heating by direct fire and controlling burned lacked or over oxygen.
2. Countercurrent type furnace is adopted, because of the direction of steel wire moving is reverse to the fiery moving direction. Waste gas is expelled through upper of the loading mouth. The airproof fitting and novel protection of surrounding are adopted between the mouth of steel wire going out and steel boiler. So it is effective to avoid steel oxidized.
3. Several burner of hot air burned gas is uniformly distributed at two side of furnace, staggered arrangement, thus hot temperature of steel wire is equal. Thermal load of every part is distributed more reasonable. The burner is complete airproof type, burning stable, turndown ratio being bigger. So it is fitted at hot air producing.
4. Exactly controlling furnace temperature and inner surrounding, to carry out high DV vale operation.
5. Setting electrical wire slot at the door of furnace, it is easily to pull or use electrical wire operation.
6. High effective saved source type heat-recovering device is adopted. The heat-exchanger recovery regains high temperature smoke expelled from the furnace, greatly improved its thermal efficiency and cutting down consumption of raw materials.
7. Perfect and reasonable protector may insure the furnace working safely. As power cut-off abruptly, speedy isolating valve will close immediately that fixed on main gas pipe of halted gas, sound and light will give an alarm. Purpose-made safe explosion-proof value is fixed at branch gas pipe, thus all the unexpected accident will be avoided.
Technical parameter
Length of furnace(m) 16-32
Heating mode direct fire
Count of burned jet 16-40
Species of fuel natural gas/liquefied gas
Count of moving wire 20-42
Range of steel wire diameter 2.0-8.0mm
Annual output(T/years) 10000-30000
Fuel consumption(of one ton steel) 30-36Nm3
Thermal efficiency ≥55%
Steel wire loss rate of oxidizing burned ≤0.45%
1. It is adopted that heating by direct fire and controlling burned lacked or over oxygen.
2. Countercurrent type furnace is adopted, because of the direction of steel wire moving is reverse to the fiery moving direction. Waste gas is expelled through upper of the loading mouth. The airproof fitting and novel protection of surrounding are adopted between the mouth of steel wire going out and steel boiler. So it is effective to avoid steel oxidized.
3. Several burner of hot air burned gas is uniformly distributed at two side of furnace, staggered arrangement, thus hot temperature of steel wire is equal. Thermal load of every part is distributed more reasonable. The burner is complete airproof type, burning stable, turndown ratio being bigger. So it is fitted at hot air producing.
4. Exactly controlling furnace temperature and inner surrounding, to carry out high DV vale operation.
5. Setting electrical wire slot at the door of furnace, it is easily to pull or use electrical wire operation.
6. High effective saved source type heat-recovering device is adopted. The heat-exchanger recovery regains high temperature smoke expelled from the furnace, greatly improved its thermal efficiency and cutting down consumption of raw materials.
7. Perfect and reasonable protector may insure the furnace working safely. As power cut-off abruptly, speedy isolating valve will close immediately that fixed on main gas pipe of halted gas, sound and light will give an alarm. Purpose-made safe explosion-proof value is fixed at branch gas pipe, thus all the unexpected accident will be avoided.
Technical parameter
Length of furnace(m) 16-32
Heating mode direct fire
Count of burned jet 16-40
Species of fuel natural gas/liquefied gas
Count of moving wire 20-42
Range of steel wire diameter 2.0-8.0mm
Annual output(T/years) 10000-30000
Fuel consumption(of one ton steel) 30-36Nm3
Thermal efficiency ≥55%
Steel wire loss rate of oxidizing burned ≤0.45%
Address:
Hudai Industrial Zone, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Main Products:
Production Line, Steel Wire, Furnace, Heat Treatment
Company Introduction:
Wuxi Xinke Metallurgical Equipment Co., Ltd. is invested and set up by Wuxi Xinke Autocontrol Research Institute which was established in 1988, a wholly private enterprise of science and technology. The company occupies the area of more than 15, 000 sq., having building area of 10, 000 sq. From 1995, the company has specially produced high and new technology products developed by the institute. Now it has become the greatest production base of machine coal burned industrial furnace in China. It has mostly been engaged in research, design and manufacture all kinds of industrial furnace and related metal equipment for more than ten years. The institute has already developed series products as follows, computer autocontrol machine coal oil burned furnace for steel wire heat treatment, computer autocontrol machine coaloilburned furnace for steel wire hot-galvanizing, computer autocontrol machine coal oil burned bench drying furnace, operating line of galvanizing steel wire, receiving wire unit; composite zinc boiler, electrical heating lead boiler and etc. The name of registered trade mark is brand′Lineng′. Among the products, Lineng brand assembled type single and binary computer autocontrol machine coal burned furnace for steel wire heat treatment is the state patent product, the number of its patent is ZL95 2 41050.8. All the products have marked effect on economizing energy source, cutting down consumption of raw materials and reducing environment pollutions, applied at the metal work factories in the state widely. The institute and its factory have gained enormous social benefits, trusted and supported by clients deeply.
The excellent performance of equipment and perfect after service makes our products sold to most provinces in China. The aim of company is credit is the first, users are supreme, serve clients cordially. Welcome new and old clients to make hand in hand cooperation and set up a good future together.
The excellent performance of equipment and perfect after service makes our products sold to most provinces in China. The aim of company is credit is the first, users are supreme, serve clients cordially. Welcome new and old clients to make hand in hand cooperation and set up a good future together.
