Fork Lift Power Units 1

Equiped with a high pressure gear pump, a DC motor, a multi-functional   Manifold, valves and a tank, this power unit has a power up gravity down circuit. Start the motor to lift the machine and the lowing movement is activated by the solenold valve with the lowering speed controlled by the pressure compensated flow control valve. The power units are widely used in the industry of logistic devices such as fork lift, mini lift table ect.

Model Displacement
RBZ-F1.2A1W2/WUAAD1
RBZ-F1.6B1W2/WUAAD1
RBZ-F2.1B1W2/WUAAD1
RBZ-F2.1B2A2/WUABD1
RBZ-F2.5C2A2/WUABD1
RBZ-F2.7C2A2/WUABD1

Remark:
1. Please go to page 1 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
2. The manual override function is available on request
Special Notes:
1. The duty of this power unit is S3, I. E., 30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concemed before mounting the power unit.
3. The viscosity of the oil shoud be 15-68 cst.
4. Change the oil after the first 100 hours of using the power unit, then change the oil every 3000 hours
5. The power unit should be mounted horizontally.