Basic Info.
Usage
Packaging Film, Textile and Apparel, Food Cling Film, Agriculture, Gift Packaging, Industry, Glass Protection Film
Processing Type
Injection Molding
Transport Package
25kg/Bag
Product Description
Virgin High Density Polyethylene/HDPE Resin 8008h Granules /HDPE
HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion
Product Parameters:
Performance of the project | Test condition [condition] | The test method | The test data | The data unit |
Basic performance | Density mass index | | GB/T 1033 | 0.948±0.002 | g/cm3 |
Density test results | | GB/T 1033 | 0.948 | g/cm4 |
Melt flow rate mass index | 190ºC/5.0kg | GB/T 3682 | 0.23±0.03 | g/10min |
Melt flow rate test results | | GB/T 3682 | 0.25 | g/10min |
Melt flow rate mass index | 190ºC/21.6kg | GB/T 3682 | 6.2±1.5 | g/10min |
Melt flow rate test results | | GB/T 3682 | 6.4 | g/10min |
Mechanical properties of | Tensile yield strength quality index | | GB/T 1040 | ≥23 | MPa |
Test results of tensile yield strength | | GB/T 1040 | 27.6 | MPa |
Elongation at break quality index | | GB/T 1040 | ≥600 | % |
Test results of elongation at break | | GB/T 1040 | 804 | % |
Quality index of impact strength of simply supported beam | | GB/T 1043 | ≥25 | KJ/m2 |
Test results of impact strength of simply supported beam | | GB/T 1043 | 26.7 | KJ/m2 |
Other properties | Volatile matter quality index | | GB/T 15658 1 | ≤350 | mg/kg |
Volatile test results | | GB/T 15658 1 | Did not check out | mg/kg |
Biochemical property | Cleanliness (color granule) quality index | | SH/T 1541 | ≤20 | grain/kg |
Cleanliness (color particle) test results | | SH/T 1541 | 0 | grain/kg |
Cleanliness (impurities) quality index | | SH/T 1541 | ≤60 | grain/kg |
Cleanliness (impurities) test results | | SH/T 1541 | 0 | grain/kg |
Application:
1.Fiber ( Carpet, Textils, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)
Packaging & Shipping:
25kg/ carton or 25kg/bag, or per your requirement
25kgs net weight in PP woven or PE plastic bag about 20 tons for 20" container
Virgin LDPE Granule/LDPE Plastic Particle/ LDPE Granule/Raffia Grade LDPE
Low-density polyethylene (LDPE) is a synthetic resin using a high pressure process via free radical polymerization of ethylene and is therefore also called "high-pressure polyethylene". Since its molecular chain has many long and short branches, LDPE is less crystalline than high-density polyethylene (HDPE) and its density is lower. It features light, flexible, good freezing resistance and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt, excellent electrical insulation properties. Its vapor penetration rate is low. LDPE has high fluidity and good processability. It is suitable for being used in all types of thermoplastic processing processes, such as injection molding, extrusion molding, blow molding, rotomolding, coating, foaming, thermoforming, hot-jet welding and thermal welding.
Detailed Photos:
Product Parameters:
Film Grade
Item | Test condition | Test Method | Value | Unit |
Density | | ISO 1183 | 0.944-0.955 | g/cm3 |
MFR | 190°C/2.16kg | ISO 1133 | 0.03-0.07 | g/10min |
Tensile strength at yield | | ISO 527-2 | 22 | MPa |
Elongation at break | | ISO 527-2 | >350 | % |
ESCR | F50,50°C,100% | ASTM D-1693A | 1000 | h |
VICAT | | ASTM D-1525 | 126 | °C |
Blow Grade
Item | Test Condition | Test Method | Value | Unit |
Density | | ISO 1183 | 0.950~0.955 | g/cm |
MFR | 190°C/2.16kg | ISO 1133 | 1.7~2.5 | g/10min |
Tensile strength at yield | | ISO 527-2 | 24 | MPa |
Elongation at break | | ISO 527-2 | >600 | % |
Injection grade
Item | Test Condition | Test Method | Value | Unit |
MFR | 190°C/2.16kg | ASTM D-1238 | 20 | g/10min |
Density | --- | ASTM D-792 | 0.954 | g/cm3 |
Tensile strength at yiled | --- | ASTM D-638 | 28 | MPa |
Elongation at break | --- | ASTM D-638 | 250 | % |
Impact tensile strength | --- | ASTM D-1822 | 42 | kJ/m2 |
ESCR | | ASTM D-1693 | 3 | --- |
VACIT | --- | ASTM D-1525 | 127 | °C |
Company Profile:
Our company was established in 2010. The factory mainly produces plastic pellets and has more than ten years of experience. The factory is a private factory integrating production, research and development, and wholesale.
The products are widely used in the electronics and automotive industries., Engineering plastics, chemical industry, tableware, daily necessities and other fields. Based on honesty, praised by the public!
We mainly deal in primary plastic particles and recycled plastic particles. Such as EVA,EPS, PE(HDPE, LDPE, LLDPE), PP, PVC, ABS, PC, , PET, etc. We insist on "The quality is the first, the service is the highest".
Our Advantages
1.Fire Resist Material. The product have the advantages of good flame retardant, strong impact resisitance, high fluidity and good processing performance.
2.Quality Assurance. The compancy has advanced and complete facilities of the laboratory, testing room, color room, to ensure the quality of products.
3.Professional Service. We can serve you in 7/24 hours whole year, professional technical communication and recommend the most suitable material for you.
FAQ:
1. Delivery time
a) For the stock items, we can arrange the shippment within 2~3 days after received your payment. For the customized items, we will indicate the delivery time in the quotation list.
2. MOQ&Shipping
a) Full containers by sea
b) Small quantity(>25kg), by air or by LCL or by Express as your requirement
3. Payment term
a) Small quantity recommend West Union
b) Full containers recommend T/T or L/C
4.How is the charge for sample?
Please feel free to negotiate with us.
5. Can you give warranty of your products?
Yes, we extend a 100% satifisfaction guarantee on all items. Please feel free to provide timely feedback if you're not satisfied with our Quality and Service. For the overseas orders, if there is a quality problem, please kindly to provide the picturers to show the problem by e-mail.
6.Can I visit your factory?
Sure, warm welcome. If you have visiting plan, please contact us to make an appointment in advance.
Address:
No. 6007 Shennan Road, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals
Management System Certification:
ISO 9001, ISO 9000, ISO 14001
Company Introduction:
Zhence Co., Ltd founded on 2014 years in Shenzhen, Guangdong, China.
We specialize in EVOH Resin more than 10 years, and we have already exported to Europe, USA and other countries.
We can supply Chunagchun EVASIN EVOH, Kuraray EVAL EVOH, Kunlun EPM copolymer J-0010 J-0030 J-0050, King Pearls EPS beads and so on.
We have pay attention to quality, our products have get ISO, SGS and other certificate.
Please contact us, to get more informations.