Basic Info.
After-sales Service
Send Someone to Design and Install
Type
Roofing and Waterproofing
Ceiling Tile Shape
Roof Tile
Ceiling Tile Type
Mineral Wool Ceilings
Surface Treatment
Film Coated
Function
Anti-static, Fireproof, Heat Insulation, Sound-Absorbing, Waterproof
160
Fiber Cement Corrugated Roofing Board Production L
Transport Package
Container, Sea, Land, Air
Product Description
Fiber cement pipe production line, fiber cement cable pipe production line, fiber cement cable protection pipe production line, asbestos cement fiber pipe production line, cement asbestos fiber pipe production line, using high-strength non-polluting fiber as the rolling material process molding, incorporating the required fiber component raw materials , For example, fiber plant raw materials, etc., the cement component is the main ratio, and a new generation of reinforced fiber cement cable pipe is obtained by copying and rolling. Fiber cement cable protection tube has high strength (bending load tube body, 10000-30000N external pressure load), corrosion resistance, acid and alkali resistance, high temperature working strength (no deterioration> 1500 ºC), good heat dissipation (=1.0<hot cathode coefficient), 0.96 is laying factor. Strong current carrying capacity, no magnetic conductivity, single core cable, no eddy current, smooth inner wall, friction coefficient is 0. Easy to cut and process. After the fiber cement cable pipe is laid underground, the wet soil is used to continue the hardening process of the pipe body to improve the strength of the fiber cement cable protection pipe body, and the service life can reach 100 years.
Various indicators such as the quality inspection of the National Concrete Product Quality Supervision and Inspection Center and the flow inspection of the Electric Power Research Institute have met or exceeded the China-GB regulations in terms of physical and chemical characteristics of the product.
1. Relatively stable chemical and technical performance, aging resistance, and its strength can increase with time maintenance.
2. Non-magnetization to prevent corrosion.
3. Protect the cable, smooth inner wall, rough with 0.07 coefficient.
4. Convenient construction, simple structure and price advantage.
Good machinability, allowing the installation to rotate three hundred and six degrees.
6. High current carrying capacity, 10% higher laying coefficient than PVC pipe. It has been used in the power construction industry at home and abroad, and the unanimous praise rate is excellent, and it has been recommended by the power construction industry.
Type 1
Labeling of fiber cement cable protection pipes
Concrete outsourcing can be applied to the utility model. The pavement can be used for utility models, non-motor vehicle lanes or greening projects, and the laying of heavy-duty motor vehicle lanes is more suitable.
Type 2
Optical cable protection tube is suitable for direct laying of heavy vehicles on road sections (Class A, Class B roads and highways).
Product Specifications
Fiber cement cable protection tube can protect the cable tube specification requirements are as follows:
Inner diameter, wall thickness, length, product name and specification (mm)
Fiber cement cable protection tube 4000 × 10 × Φ100, Φ100 type
Φ4000×10.5×125×ΦA grade 125 fiber cement cable protection tube
Φ150 Class A fiber for cement and cable protection tube Φ150×10.5×4000
Type A 175 12 4000 Fiber Cement Cable Protection Tube
Fiber cement cable protection tube Φ200 type Φ200 × 13 × 4000
Φ100 Fiber Cement Cable Protection Tube Grade B Φ100×11×4000
Φ125 fiber for cement and cable protection tube Type B Φ125×14×4000
Φ 150 fiber cement cable protection tube type bΦ 150 × 14 × 4000
Φ175 type Φ175 × 14 × 4000 optical fiber cement cable protection tube
φ200 Fiber Cement Cable Protection Tube Class B φ200×15×4000
Φ100 fiber cement and cable can protect the tube C type Φ100×14×4000
Fiber cement cable protection tube type C 150 16 4000
Φ175 C type Φ175 × 16 × 4000 optical fiber type cement cable protection tube
Diameter 200 Fiber Cement Cable Protection Tube Class C Diameter 200×19×4000
(reinforced) Φ150×16×4000Φ150 fiber cement cable protection tube Class G
Grade G (reinforced) Φ 200 fiber cement cable protection tube Φ 200 × 16 × 4000
Construction methods
Fiber cement cable protection pipe construction technical scheme
1. Customize or select the diameter of China's power fiber cement pipe to meet the requirements of the technical regulations of the enterprise power system cable, generally 1.3-1.6 times the outer diameter of the cable.
2. If the power pipeline is laid after the trench is excavated, the bottom of the trench must be compacted and leveled. complex environment. It is necessary to make foundation concrete with a thickness of 100mm, and the outer diameter of the pipe should not be less than 100mm from the edge of the foundation. When crossing other pipelines or encountering sand and gravel soil layers, use reinforced concrete foundations according to design advice.
The quality inspection test tube must be tested for physical and chemical indicators before running. Remove defective products.
4. When the pipeline is laid, the pipeline should be on the pad or on the ground. A safety distance is required at the work pit connection of each pipeline.
5. When the joint is installed, lubricating liquid needs to be applied to the pipe hoop, and the distance between the two pipe openings can reach 10-15mm.
6. After laying power pipelines between building passages, supervisors and security inspectors should backfill the building base material after alignment. The backfilling should be in accordance with the design indicators, and sand or cement should be filled on both sides of the pipeline.
Fiber cement cable protection tube
Address:
6 Xinghua Street, Zhengzhou, Henan, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001
Company Introduction:
Zhengzhou Xinglongyuan Machinery Manufacturing Co., Ltd. is located between Zhengzhou, the capital of Henan Province, and Luoyang, the ancient capital of the Nine Dynasties, with Songshan in the south and the Yellow River in the north. The transportation is convenient. The Longhai Railway, 310 National Highway and Kailuo Expressway traverse the territory. Advocating green and energy-saving environmental protection concepts, it is a joint-stock enterprise engaged in scientific research, design, equipment manufacturing, installation and commissioning. It has many professional and technical personnel. It can provide users with asbestos tile machines, vacuum asbestos tile equipment, asbestos tile equipment, asbestos tile production line, asbestos Plate equipment, asbestos pipe equipment, asbestos board machine, asbestos pipe machine, calcium silicate board equipment, cement fiber board equipment and other complete sets of equipment as well as beneficiation and crushing equipment. It is a manufacturer with strong comprehensive strength in the machinery manufacturing industry in Henan Province. Compared with traditional machinery enterprises, our company has the advantages: High-quality technical team, reliable product quality, excellent product performance, high-energy production and installation schedule, international management mode and timely and thoughtful service. Our company has the world′s leading professional technology in the building materials industry. The main products of building materials machinery are: Calcium silicate board equipment production line, fiber cement board equipment production line, large, medium and small wave asbestos tile equipment production line and other complete sets of building materials equipment. At present, the main products of conveying machinery are: Various models of buried scraper conveyors, bucket elevators, belt conveyors, chain conveyors, chain bucket conveyors, various powder valves and other shaped products and patented products. The company has more than 100 major equipment such as large-scale, precise and special-purpose equipment, and has formed a complete and exquisite mechanical manufacturing process such as casting, riveting, forging, metal cutting, heat treatment, and electrical control. It has become a strong technical force, complete mechanical equipment, and testing methods. A high level of specialization, considerate after-sales service, and a building material machinery and equipment processing base trusted by users. The products are sold in major provinces, municipalities and autonomous regions across the country, and exported to the Middle East, Central Asia, Africa, South America and Southeast Asia and other surrounding and regions.
Our company will continue to pursue the goal of high-grade and high-quality products, and welcome new and old customers to unite and cooperate to create benefits and common development!