1/1

Adhesive

106,331 results for Adhesive

Secondary Sealant-Two Components Polysulfide Sealant for Insulating Glass-Mf840

US$1.26-1.33 / ml
6000 ml  (MOQ)

MF840 POLYSULFIDE SEALANT Two Component Polysulfide Sealant for Insulating Glass Secondary Sealant for The Manufacturer of Insulating Glass APPLICATION FIELD: Secondary sealant for the manufacturer of insulating glass. Two component , room temperature cured polysulfide sealant. Excellent adhesion to most building materials such as glass, aluminum alloy, and galvanized- steel,stainless steeletc. Solvent free, primers are not required . High strength and elasticity. APPLICABLE STANDARDS: EU Specification: EN1279 - part 2,3, 4 China Specification : GB/T 29755 IGCC-IGMA Approved . ♦ TECHNICAL DATA - TYPICAL PROPERTIES TEST ITEMS TEST RESULTS COLOR Component A (base) White Component B (catalyst) Black Mixture (A+B): Black MIXING RATIO POT LIFE (23°C) 10:1(by weight) 20 min. Pot life is influenced by room conditions. HARDING TIME 2-3 hrs, depending from pot life. DENSITY Com A[23°C] approx. 1.80 [g/cm3] Com B [23°C] approx. 1.55 [g/cm3] VISCOSITY Com A [23°C] 490 Pa.s ComB[23°C] 120 Pa.s FINAL HARDNESS(ShoreA) 45 [Shore A] MOISTURE VAPOUR TRANSMISSION (MVTR) 11 gr/m2.24hrs.2mm EN 1279/4 GAS PERMEATION(Ar) 6.63 x 10-3 [gr/m2.hrs] EN 1279/4 TENSILE ADHESION STRENGTH approx. 0.70 [MPa] VOLATILE CONTENT(A+B) <1.0% FOGGING Without visual fogging Test Condition: As cured after 14 days at Temperature 23°C and 50% R.H. ♦ PACKAGING Com A190 L/drum Com A 30 kg/pail Com A4 kg/pail Com B 19 L/pail Com B 3.6 kg/pail Com B 0.48 kg/bag .APPLICATION FIELD One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units. It can keep its plastic and sealing properties in a wide temperature range. Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel. Minimum moisture vapour and gas permeation. Excellent temperature stability: - 30°C to 80°C. ♦ TECHNICAL DATA - TYPICAL PROPERTIES TEST ITEMS TEST RESULTS TESTS1ANDARD Base Polyisobutylene (PIB) - Color Black - Appearance Solid mass GB/T 1033.1 Density 1.1/1.25 fe/cm3] JC/T914 Shear Strength 0.21 MPa Penetration (1 /1 Omm) 25°C 40 130°C 290 JC/T 914 Volatile Content Max. 0.02 % Fogging Without visual fogging - Moisture Vapour Transmission Rate (MVTR) 0.26 [gr/m2.24hrs. 2mm] EN1279-4 Gas Permeation Rate (Ar) 1.30x10-3[gi7m2. hrs] EN1279-4 ♦ APPLICATION INSTRUCTIONS Hot Applied Butyl Sealant for Insulating Glass Primary Sealant for the Manufacturing of Insulating Glass .APPLICATION FIELD One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units. It can keep its plastic and sealing properties in a wide temperature range. Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel. Minimum moisture vapour and gas permeation. Excellent temperature stability: - 30°C to 80°C. ♦ TECHNICAL DATA - TYPICAL PROPERTIES TEST ITEMS TEST RESULTS TESTS1ANDARD Base Polyisobutylene (PIB) - Color Black - Appearance Solid mass GB/T 1033.1 Density 1.1/1.25 fe/cm3] JC/T914 Shear Strength 0.21 MPa Penetration (1 /1 Omm) 25°C 40 130°C 290 JC/T 914 Volatile Content Max. 0.02 % Fogging Without visual fogging - Moisture Vapour Transmission Rate (MVTR) 0.26 [gr/m2.24hrs. 2mm] EN1279-4 Gas Permeation Rate (Ar) 1.30x10-3[gi7m2. hrs] EN1279-4 MF322 two-component polyurethane corner glue Mainly used for bonding and sealing between aluminum alloy corners and profile cavities in aluminum alloy door and window structures; suitable for bonding wooden doors,

280ml 300ml Sealing Glass Ceramics General Posible Silicone Sealant

US$1.1-1.75 / Piece
2400 Pieces  (MOQ)

280ml 300ml Sealing Glass Ceramics General Posible Silicone Sealant General Posible Silicone Sealant is a cost effective, general purpose acetoxy cure silicone sealant which offers long term durability in a range of general sealing and general glazing applications. It can be used to glaze, seal and fill joints on windows, signs, internal fixtures and fitting like doors and so on. FEATURES *Easy to use - one part, no mixing required. Can be dispensed with an ordinary caulking gun. *Cures to a strong, flexible seal capable of withstanding movement in and around the joint. *No seasonal limited in application. *Outstanding weatherproofing ability, resisting to ultraviolet ray, ozone, snow, or temperature extremes. *Non-slumping; can be used in vertical and overhead joints. PACKAGING PERFOR Available in: Standard Size: 280ml/30ml recyclable plastic cartridge, 24ctgs/ctn Special Size: Contact us for special size. PERFORMANCE DATA Test Parameter Unit Result As Supplied Tested at 23ºC and 50% RH Specific Gravity g/ml 0.94±0.02 Flow (sag or slump) mm 0 Extrusion Rate ml/minute 130 Skin Time minute 5~10 Tack-free Time hour ≤1.0 Curing time (5mm) hour ≤18 As Cured-after 21 days at 23ºC and 50% RH Durometer Hardness, Shore A Points 18 Movement Capability % ±20 Tensile/Modulus at 50% Elongation Mpa 0.28 Tensile/Modulus at 100% Elongation Mpa 0.3 Ultimate Tensile Strength Ultimate Elongation at Break Mpa % 0.4 375 Silicone Sealant Operation Methods Silicone Sealant * Stays permanently elastic after curing. * Remains flexible in low and high temperatures. * Resistant to temperature extremes. * Resistance to aging, cracking and discoloring. Application Hot sales Packing & Delivery Our Company Shanghai JUNBOND BUILDING MATERIAL Co., Ltd was extablished in 2007. -- 14 years of experience in Silicone sealants -- 5 sealant factories and 1 PU foam factory in China -- 10 skilled technicians customize for customers -- Strategic partner with China's largest raw material supplier -- Quality comparable to Dow Corning Junbom Team Factory Infomation Exhibition FAQ : 1.Are you manufacturer? Yes. Our company-Junbom is the top three of PU Foam and Silicone Sealant manufacturer in Asia . PU Foam factory in Anhui , Silicone Sealant factory in Hubei , Guangdong province China .Junbom with 14 years experience in this industry, we have served clients from more than 80 countries. Junbom is well- known for its quality and our team win clients' trust by honesty and down to earth business style. 2.How long can I get a quote? The quotation can be provided not longer than 24 hours on condition that we know all detailed requirements. 3.Do you accept Private Label!? Yes. We can do OEM for customers. 4.Can I get a sample before order? Of course. Generally, we provide 1-3 pieces free samples . 5.How long you will finish my order? It is depend on your order quantity. Generally, the 40HQ container delivery time about 2 weeks . 6.How can you guarantee the quality? A: We have rigorous quality test system, from raw materials to finished products, the materials must be checked and signed by QC colleagues. 7.How to find the suitable sealants? Please let me know your application purpose, substrate, application method and all your requirements. Please click contact us for more questions~

Mainly Dimers Making Varnish Ink Adhesives Thermoplastic Plastics Polymerized Rosin B-90/100/115/140

US$1.9-2.1 / kg
25 kg  (MOQ)

Product Description Product Introduction: Polymerized Rosin ls A Yellow Brown Amorphous Solid. lt Has The Characteristics Of High Molecular Weight, HighSoftening Point, High Content, Non Crystallization, High Acid Value, Low Content Of Hot Water Soluble Substances, Good Oil Solubility, Light Discoloration Of Lead AcetateAnd Higher Softening Point Than Rosin. Yellow brown amorphous solid. Composed of rosin monomers and dimers. It has more antioxidant properties, brightness, and anti crystallization properties than rosin. Application Product Performance: Antioxidant, Brightness, Anti Crystallization, High Softening Point, Etc. Application Scope: Paint, Ink, Adhesive, Traditional Chinese Medicine Wax Pills, Coatings, Precision Casting, Pigments, Food, Electrical And Other Industries. Product Parameters Name: Aggregated Rosin 140 Code: AJ02 Softening Point (Global Method): 135-145 Color (Sodium Added Color Code): 4-6 Acid Value (Mgkoh/G): 140 Hot Water Soluble Substance (%): ≤ 0.2 Ethanol Insoluble Substance (%): ≤ 0.03 Softening point 125-145 Acid value, mgKOH/g ≥ 140 Ethanol insoluble matter (%) ≤ 0.03 Hot water soluble matter (%) ≤ 0.2 Packaging & Shipping Company Profile Our main products are acidity regulators, preservatives,seasoning and flavous, sweeteners, thickness, detergent chemicals, antioxidants, textiles, paint, feeding material and other chemical such as citric acid, sodium benzoate, benzoic acid etc. Especially for citric acid, we have fought anti-dumping case which is in 2004, at that time, only one company in China to fight the case, we won the case and got the good reputation in Indian. We can also supply CIQ as customers' requests. So far, our company's citric acid is the company with the largest export volume in China. At the same time, we are also a government-based enterprise with integrity and reliability. Certifications Our Services FAQ 1. Q: What's Your Payment Terms? A: We Are Ok For TT,LC At Sight, LC 90/120 Days, WeCan Also Try OA For Regular And Reliable Clients. 2. Q: What's Your Delivery Time? A: Usually We Will Arrange The Shipment In 7 -15 Days. 3. Q: How About The Packing? A: Usually We Provide The Packing As 25 Kg / Bag Or Carton. Of Course, If You Have Special Requirements On Them, We Will According To You. 4. Q: How About The Validity Of The Products? A: According To The Products You Ordered. 5. Q: How To Confirm The Product Quality Before Placing Orders? A: You Can Get Free Samples From Us Or Take Our Sgs Report As Referene Or Arrange Sgs Before Loading. 6. Q: What Is Loading Port? A: Usually Is Shanghai, Qingdao or Lianyungang.

Free Sample 100% RTV Silicone Rubber Adhesive Sealant

US$0.16-0.50 / Piece
1 Piece  (MOQ)
Product Details Silicone gasket, RTV silicone sealant,RTV gasket maker • RTV is a nonslump acetoxy curing paste that cures to permanently flexible silicone rubber on exposure to • RT

High Thermal Grease Thermally Conductive Grease Is Used to Fill The Gap Between The CPU and The Heat Sink.

US$30.00-35.00 / kg
1 kg  (MOQ)
Thermal conductive silicone grease is a high thermal conductivity insulating organic silicon material, which is mainly made of organic silicone and added with materials with excellent heat resistance

Glue for Granite and Marble Adhesive with Hardener

10 Tons  (MOQ)
Specifications Marble and granite glue : 1.Fast hardening. 2.Can be treated in cold weather. 3.Non hand sticky after cured. 4.Good adhesion 1.Marble and granite glue characteristi

Optically Clear Silicone Filled Seals for LED Optical Couplers in Medical Devices

US$2.50-7.50 / Piece
1 Piece  (MOQ)
Single component silicone rubber is a liquid silicone rubber that solidifies by contact with trace amounts of moisture in the air. It can quickly cure at room temperature and belongs to a type of room

OEM Durable Waterproof Neutral Silicone Sealant with Excellent Temperature Resistance

US$0.50-0.60 / Piece
4800 Pieces  (MOQ)
Product Description Product Introduction: Single component cured neutral silicone sealant, easy to use, can be applied in humidity ranging from 5 to 40 ºC, with fast curing speed and high adhes

Heavy-Duty Liquid Nail Super Adhesive Glue with Superior Gap-Filling Ability

US$0.35-0.45 / Piece
4800 Pieces  (MOQ)
Product Description Product introduction: Lvkang brand liquid nails glue has extremely strong bonding strength and can replace nails to the greatest extent possible. It does not require surface

UV Resistance Waterproof Weatherproof 600ml Sausage Neutral Silicone Sealant

US$1.00-1.20 / Piece
2400 Pieces  (MOQ)
UV Resistance Waterproof Weatherproof 600ml Sausage Neutral Silicone Sealant Features: One-component room temperature curing neutral,easy to use.In the temperature range 4-40ºC's has good e
1/1
About Adhesive FAQ
  • QWhat are the main types of adhesives available for industrial use?

    There are several types of adhesives available for industrial use, including epoxy, acrylic, polyurethane, silicone, and hot melt adhesives. Each type is designed for specific applications, offering varying levels of strength, flexibility, and resistance to different environmental factors such as heat, moisture, and chemicals.

  • QHow do adhesives improve efficiency in manufacturing processes?

    Adhesives improve efficiency in manufacturing by simplifying assembly processes, reducing production time, and minimizing the need for mechanical fasteners. They provide uniform stress distribution across bonded surfaces, leading to stronger and more durable joints while also offering greater design flexibility and lightweight assembly.

  • QWhat factors should be considered when selecting an adhesive for a project?

    When selecting an adhesive, consider factors such as the materials to be bonded, the required bond strength, environmental conditions, and the intended application. Additionally, reviewing the curing time, ease of application, and long-term performance characteristics is crucial to ensure optimal results for your project.