Fiberglass

Compability Resin PBT and Pet Fiberglass Chopped Strand

Product List Fiberglass Chopped Strands including Chopped Strands For BMC, Chopped Strands For Thermoplastics, Wet Chopped Strands, Alkali-Resistant Chopped Strands(ZrO2 14.5% / 16.7%). 1).Chopped Strands For BMC Chopped Strands for BMC are compatible with unsaturated polyester, epoxy resin and phenolic resins. The end-use applications include transportation, building & construction, electronic & electrical, mechanical, and light industry. 2). Chopped Strands For Thermoplastics Chopped Stands for Thermoplastic are based on silane coupling agent and special sizing formulation, compatible with PA,PBT/PET, PP, AS/ABS, PC, PPS/PPO,POM, LCP; E-Glass Chopped Stands for thermoplastic are know for excellent strand integrity, superior flowability and processing property, delivering excellent mechanical property and high surface quality to its finished product. 3.) Wet Chopped Strands Wet Chopped Strands are compatible with unsaturated polyester, epoxy and phenolic resins and gypsum. Wet Chopped Strands have moderate moisture content and deliver outstanding flowability, including dispersion in water and in gypsum. 4.) Alkali-Resistant Chopped Strands(ZrO2 14.5% / 16.7%) I). Premix Alkali-Resistant Chopped Strands -- (ZrO2 14.5% / 16.7%) Premix chopped strands is a high alkali resistant glass fiber chopped strand for general use intended for premixing with other materials and is produced by the use of tamping casting or other processes in a molded GRC part. Even under high-dose conditions is also very easy to integrate, and after mixing a good cluster. For the production of standard GRC components such as water pipes or instrument boxes, or building facilities such as lightweight partition boards, zirconia content of 16.7% chopped yarn production components of the late strength of the performance better II). Low TEX Alkali-Resistant Chopped Strands -- (ZrO2 14.5% / 16.7%) Low Tex chopped strands is a high Intergrity, low tex, alkali-resistant, glass-fiber chopped strand for molding GRC components in dry mix systems or other premixing processes. It can also be used for the production of prefabricated components in standard GRC components. The specially formulated wetting agent system makes it easy to blend and maintain good integrity during mixing, effectively preventing wear and maintaining the bundling properties when mixed with dry materials. The yarns with low single-strand density can increase the specific surface area with low participation, and thus produce stronger enhancement effect. The product is particularly suitable for preparing pre-made mortar and paint mixes. III). Water dispersed Alkali-Resistant Chopped Strands -- (ZrO2 14.5% / 16.7%) water dispersed chopped strands is a special purpose alkali-resistant glass fiber chopped strand, used for mixing with cement and other materials that require high dispersion. Especially for the special mud mud mixture of dressing or for mortar fluidity and other special industrial production. The product's sizing agent system is water-dispersible and, when mixed with water, can be sufficiently dispersed into monofilaments. Used in the painting and concrete repair mixture, and through a special process to produce a certain standard GRC components. Product Description Chopped Strands For BMC Low viscosity and excellent flowability of the BMC paste Low static and low fuzz, fast and good dispersion in resins Good processing and exc Product Parameters Filament Diameter (%) Moisture Content (%) LOI Content (%) Chop length (mm) ISO1888 ISO3344 ISO1887 Q/BH J0361 ±10 ≤0.10 0.50±0.15 ±1.0 Product No. Chopped Length(mm) Product Features Resin Compatibility Applications BH-BMC01 3,6,9,12 Extremely

China Factory Hot Sale Fiberglass Products

China Factory Hot Sale Fiberglass Products Product Description A. Fiberglass Chopped Strand Mat E-Glass Fiberglass Chopped Strand Mat is made of randomly oriented chopped glass strands around 50mm in length and bonded together with polyester binder in powder form or emulsion form. It is compatible with Polyester, Vinyl ester and Epoxy resin and widely used in boat building, automotive, cooling towers, bathroom accessories, anti-corrosion pipes etc, suitable for hand lay up, filament winding, press molding forming processes. Features: 1,Randomly dispersed and excellent mechanical properties. 2,Excellent compatibility with resin, cleaning surface, well tightness. 3,Excellent heating resistance. 4,Faster and well resin wet-out rate. 5,Easily fills mold and confirms to complex shapes. Product Code Area Weight (+/-5%) Binder Content (%) Water Content (%) Tensile Strength (N/150mm) Binder Type Standard Roll Width (mm) EMC100 100 8-10 ≤0.2 ≥20 Powder/Emulsion 1040, 1270, 1500 EMC150 150 8-10 ≤0.2 ≥20 Powder/Emulsion 1040, 1270, 1500 EMC180 180 6-8 ≤0.2 ≥30 Powder/Emulsion 1040, 1270, 1500 EMC200 200 6-8 ≤0.2 ≥30 Powder/Emulsion 1040, 1270, 1500 EMC225 225 4-5 ≤0.2 ≥30 Powder/Emulsion 1040, 1270, 1500 EMC300 300 4-5 ≤0.2 ≥50 Powder/Emulsion 1040, 1270, 1500 EMC450 450 3-4 ≤0.2 ≥70 Powder/Emulsion 1040, 1270, 1500 EMC600 600 3-4 ≤0.2 ≥90 Powder/Emulsion 1040, 1270, 1500 EMC900 900 3-4 ≤0.2 ≥120 Powder/Emulsion 1040, 1270, 1500 B. Fiberglass Woven Roving Fiberglass woven roving is made from continues E-Glass Roving's that are loosely woven into a heavy fabric. They are suited for application in boats, pools, crafts etc. and are compatible with polyester and Epoxy resin systems. It is a Plain Weave, E-glass Fiberglass Woven Roving Cloth for repair, maintenance & waterproofing applications. It is compatible with epoxy and polyester resin systems. Product Code Area Weight(g/m2) Density Warp*Weft / cm Roving Tex(Warp * Weft) Combustible Content JZ-EWR200 200 4.6*4.6 200*200 0.4-0.8% JZ-EWR 270 270 4.6*4.1 300*300 JZ-EWR360 360 3.2*1.8 600*900 JZ-EWR400 400 3.6*3.2 600*600 JZ-EWR450 450 3.2*2.8 600*900 JZ-EWR500 500 2.2*2.0 1200*1200 JZ-EWR580 580 2.6*2.2 1200*1200 JZ-EWR600 600 2.6*2.4 1200*1200 JZ-EWR800 800 2.0*1.6 2400*2400 C. Fiberglass Cloth E-Glass Fiberglass Cloth also called fiberglass fabric which is an engineering material, which has the excellent merit such as anti-burns, anti-corrosion, stable-size, heat-isolation, minimum elongated shrinkage, high intensity, this new material product has already covered many domains such as electric appliances, electronic, transportation, boat building, FRP products, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection, etc. Characteristics: High and low temperature resistant, acidalkali resistant, ozone resistant, aging resistant, weather resistant, good insulation property, anti-toxic, good air-permeable, etc. Fiberglass Fabric Weaving Type: plain, twill, satin and gauze. a. Plain: it can be used in electricity insulation materials and reinforced materials in industry, because of inseparable structure, plain and clear lines. 100gsm-2000gsm b. Twill: compared with plain weave, it is of high density, high intensity, with a soft and loose structural weave. It can be used in ordinary reinforced materials, filter materials, and painting cloth. c. Satin: compared with plain weave and twill weave, it is of high density,high intensity, with a soft and loose structural weave with a good texture. It is appli

Fiberglass Flooring Tissue as Excellent Flooring Base Material and Wallpaper

Fiberglass flooring tissue Product Description Fiberglass flooring tissue products are the substrate material of plastic floor and decorative wallpaper. The floor and wallpaper made by this product have the property of good stability, smooth appearance, bright color and convenient laying. It is widely used for decoration materials for hospitals, schools, libraries and other public entertainment places, also hotels, shopping centers, conference halls, offices and residential buildings and other high-grade ground and wall. Characteristic Fiber Uniformly Dispersed Smooth Surface, Less Wool Yarn; Easy to Coating PVC ; Stiff, Folding Resistance, not Easy to deformation Good Dimensional Stability Application Typically Laid scrims are used in roofing, flooring, tapes, automotive, composites, hygiene, medical, packaging, light weight constructions and many other industries. Technical Data Product code Unit Weight (g/m2) LOI( %) MD Tensile Strength (N/50mm) CD Tensile Strength (N/50mm) Thickness (mm) Moisture Content(%) F-DB25 25 ≤25 ≥ 80 ≥50 0.2 ≤ 1.0 F-DB0.3 35 ≤30 ≥ 150 ≥70 0.30 ≤ 1.0 F-DB40 40 ≤30 ≥180 ≥80 0.35 ≤ 1.0 F-DB45 45 ≤30 ≥ 200 ≥90 0.35 ≤ 1.0 F-DB50 50 ≤30 ≥250 ≥100 0.40 ≤ 1.0 Testing Basis ISO3374 ISO1887 ISO3342 ISO4603 ISO 3344 ISO 3344 Paper core diameter: 152mm Packaging 1.Roll packaging: PE plastic film 2.Pallet packaging: Pallets should NOT be stacked in more than 2 layers. Pallet is free of fumigation, fumigation certificate is available Company Profile FAQ

6mm Fiberglass Chopped Strand 552b for Thermoset About SMC/BMC

FRP Material Fiberglass Csm Chopped Strand Mat 450g

Direct Sell High Quality Zro2>16.5% Ar Type Glass Fiber Chopped Strand for Grc/Cement

Focus on Production Glass Fiber for Brake Lining Brake Pads Construction and Industry