Refinery Process Additives

23 results for Refinery Process Additives

Yes · Liquid

Silicon Free Defoaming Agent for Delayed Coking/Oil Refinery Additive

US$ 2619-3139 / Ton
1 Ton  (MOQ)
Product Introduction The pyrolysis oil and gas in the coke tower escape from the raw materials to form a very high foam layer, which contains a large amount of coke powder. In the later stage of coking, when the coke layer rises to a certain height, the foam layer enters the fractionating

Yes · Liquid · Fuel Additives

Not Contains Se Metal Passivator Used as Protection of Crude Oil Pipeline Equipment/Oil Refinery Additive

US$ 4059-4579 / Ton
1 Ton  (MOQ)
Product Introduction The residual oil blended in the catalytic cracking process contains a large amount of metals (such as Ni, V, Na, Fe, etc.), which continuously deposit on the FCC catalyst, leading to catalyst metal poisoning, reduced activity and light oil selectivity, resulting in an

Yes · Liquid · Fuel Additives

Gasoline Deep Detergent Additive Used as Carbon Deposit Removal/Fuel Oil Additive

US$ 3769-4289 / Ton
1 Ton  (MOQ)
Product Introduction This product is a high-efficiency gasoline deep detergent additive specifically designed for refineries, suitable for the blending system of finished gasoline produced by processes such as catalytic cracking and reforming. By targeting the removal of sediment precursor

Yes · Liquid

Coking Inhibition & Yield Enhancement Additive/Oil Refinery Additive

US$ 2329-2849 / Ton
1 Ton  (MOQ)
Product Introduction Suitable for delayed coking units using paraffin based, intermediate based, and cyclic residue oil as raw materials. Inhibiting free radical chain reactions to reduce dry gas generation, preventing aromatic hydrocarbon condensation from reducing coke generation, improv

Yes · Fuel Additives · Liquid

High Temperature Corrosion Inhibitor Used as Protection of Crude Oil Pipeline Equipment/Oil Refinery Additive

US$ 2909-3429 / Ton
1 Ton  (MOQ)
Product Introduction During the refining process, when the temperature exceeds 230 ºC, sulfur and cycloalkanoic acid undergo chemical corrosion. Sulfur reacts with Fe to form FeS, which adheres to the metal surface to form a protective film that can prevent further corrosion by sulfur

Yes · Fuel Additives · Liquid

Water Soluble Corrosion Inhibitor Used as Protection of Crude Oil Pipeline Equipment/Oil Refinery Additive

US$ 2189-2709 / Ton
1 Ton  (MOQ)
Product Introduction During the atmospheric and vacuum distillation process of crude oil in refineries, sulfur in the crude oil causes corrosion of the atmospheric and vacuum distillation tower and cold exchange equipment. In severe cases, equipment perforation can pose a threat to safety

Yes · Fuel Additives · Liquid

Gasoline Copper Corrosion Inhibitor Used as Suppress The Corrosion of Copper by Gasoline/Fuel Oil Additive

US$ 7229-7749 / Ton
1 Ton  (MOQ)
Product Introduction In the production process of gasoline mercaptan removal, it is common to encounter the problem of unqualified copper corrosion of gasoline after mercaptan removal. This type of unqualified gasoline is still difficult to pass due to corrosion after alkali washing and re

Yes · Liquid · Fuel Additives

Contains Se Metal Passivator Used as Protection of Crude Oil Pipeline Equipment/Oil Refinery Additive

US$ 3769-4289 / Ton
1 Ton  (MOQ)
Product Introduction The residual oil blended in the catalytic cracking process contains a large amount of metals (such as Ni, V, Na, Fe, etc.), which continuously deposit on the FCC catalyst, leading to catalyst metal poisoning, reduced activity and light oil selectivity, resulting in an

Yes · Fuel Additives · Liquid

Oil Soluble Corrosion Inhibitor Used as Protection of Crude Oil Pipeline Equipment/Oil Refinery Additive

US$ 2909-3429 / Ton
1 Ton  (MOQ)
Product Introduction During the atmospheric and vacuum distillation process of crude oil in refineries, sulfur in the crude oil causes corrosion of the atmospheric and vacuum distillation tower and cold exchange equipment. In severe cases, equipment perforation can pose a threat to safety

Yellow · Liquid

Factory Supply Oil-Soluble Imidazoline Corrosion Inhibitor Stock Solution for Oil and Gas Transportation

US$ 4.8-5.8 / kg
1000 kg  (MOQ)
Product Description Product specification : Appearance: Yellow to brown viscosity liquid Solid content:95%min Density(20ºC):0.90~1.00g/cm3 Flash point (closed ,ºC) : ≥60ºC Corrosion inhibition rate :90% Freezing Point:≤10ºC Quantity: 106.4tons(in 7*20FCL)
  • QWhat are the main types of Refinery Process Additivess?

    Refinery Process Additivess include a range of compounds like detergents, antioxidants, friction modifiers, anti-wear agents, and corrosion inhibitors. Each type is formulated to address specific issues like sediment build-up, oxidation, friction reduction, metal surface protection, and corrosion resistance in engines and fuel systems, respectively.

  • QWhy is the quality of Refinery Process Additivess important?

    The quality of Refinery Process Additivess directly affects the efficiency and lifespan of engines and fuel systems. High-quality additives ensure optimal performance, reduce maintenance costs, and minimize environmental impact. Inferior additives can lead to engine wear, excessive emissions, and energy wastage, increasing operational risks and costs.

  • QHow do Refinery Process Additivess improve fuel performance?

    Refinery Process Additivess enhance fuel performance by cleaning and protecting engine components, reducing deposits, improving lubrication, and stabilizing fuel compositions. This leads to smoother operation, better fuel economy, reduced emissions, and extended equipment life. These outcomes are essential for maintaining efficiency in engines over time.

Composite Additive · Yes · Liquid

Water Oil Treatment Industrial Chemical Oil Demulsifier

US$ 1-2 / kg
1 kg  (MOQ)
Demulsifier CW-26 Description Demulsifier is oil exploration, oil refining, wastewater treatment industry of chemical agents. The demulsifier belongs to the surface active agent in organic synthesis.It has good wettbility and enough ability of flocculation . It can make the demulsification q

V44 Z1, Z2, Z3, Z4 Primary Steam Reforming Chemical Catalyst 1

US$ 15500-25500 / Ton
1 Ton  (MOQ)
Product Description Excellent conversion activity and activity stability The active component is evenly and stably distributed on the carrier surface, so the reforming catalyst has excellent and stable conversion activity, which ensure the service life more than 4 years. More stable with excell

Yes · Granulars · Fuel Additives

Hydrogenation Conversion Chemical Catalyst for Olefins & Organic Sulfides Kh-4

US$ 100000-200000 / Ton
1 Ton  (MOQ)
Product Description KH-4 hydrogenation catalyst is a kind of new hydrogenation catalyst. The catalyst has high hydrogenation conversion capacity of the olefin and organic sulfide in the feed gas. It is applicable to the isothermal hydrogenation process of the coking dry gas and catalytic dr

Brown · Granule

Walnut Shell for Polishing & Water Treatment

US$ 0.389-0.545 / kg
1 kg  (MOQ)
Specifications : Project Index Moisture 15.0 Max Fineness >5mm 5.0 Max 5mm-0.9mm 40.0 Min 0.9mm-0.6mm 30.0 Max <0.6mm 20.0 Min Prodcuts Introduction: Fruit shell Plugging Agent material is made of walnut shell, apricot shell, cherry shell, jujube shell and other fruit shell process

Yes · Fuel Additives · White

Industry Grade CMC Carboxy Methyl Cellulose CAS 9000-11-7/9004-32-4 Cm 32-Cellulose

US$ 20-80 / kg
20 kg  (MOQ)
Specifications: Basic Data Shape Powder Color White or Yellow Odor No Chemical Data Viscosity(1%,Mpa.S) 1 ,000min Degree Of Substitution 0.7-0.9 PH(25°C) 6.5-8.5 Humidity(%) 10.0max Purity(%) 99.5Min Heavy Metal (Pb) , PPM 10Max Iron, PPM 2Max Arsenic, PPM 3Max Lead,

White · Granule

Sewage Treatment Chemicals Featuring Anionic Polymer and Cationic Flocculant with Amphoteric Polyacrylamide

US$ 1500-1700 / Ton
1 Ton  (MOQ)
Amphoteric Polyacrylamide 1. Amphoteric polyacrylamide used as latest water treatment agent When treating sewage and tap water in many occasions, anionic polyacrylamide and cationic polyacrylamide are used together to produce a more significant and synergistic effect than one polyacrylamide

White · Granule

Top-Selling Sewage Treatment Chemicals: Anionic Polymer, Cationic Flocculant, and Amphoteric Polyacrylamide

US$ 1500-1700 / Ton
1 Ton  (MOQ)
1. Amphoteric polyacrylamide is used as the latest water treatment agent When treating sewage and tap water on many occasions, anionic polyacrylamide and cationic polyacrylamide are used together to produce a more significant and synergistic effect than one polyacrylamide alone. The performance

White · Granule

Tailored Nonionic/Cationic/Anionic Polyacrylamide for The Paper Making Industry - High Quality Guaranteed

US$ 1500-1700 / Ton
1 Ton  (MOQ)
1. Amphoteric polyacrylamide is used as the latest water treatment agent When treating sewage and tap water on many occasions, anionic polyacrylamide and cationic polyacrylamide are used together to produce a more significant and synergistic effect than one polyacrylamide alone. The performance

Yes · Granulars · Fuel Additives

Hydrogenation Conversion Chemical Catalyst for Olefins & Organic Sulfides Kh-4

US$ 100000-200000 / Ton
1 Ton  (MOQ)
Product Description KH-4 hydrogenation catalyst is a kind of new hydrogenation catalyst. The catalyst has high hydrogenation conversion capacity of the olefin and organic sulfide in the feed gas. It is applicable to the isothermal hydrogenation process of the coking dry gas and catalytic dry g

White · Granule

Factory Sale Sewage Treatment Reagents Anionic Polymer, Cationic Flocculant, Amphoteric Polyacrylamide

US$ 1500-1700 / Ton
1 Ton  (MOQ)
1. Amphoteric polyacrylamide is used as the latest water treatment agent When treating sewage and tap water on many occasions, anionic polyacrylamide and cationic polyacrylamide are used together to produce a more significant and synergistic effect than one polyacrylamide alone. The performance

White · Granule

Factory Sale Sewage Treatment Chemicals Reagent Anionic Polymer Cationic Flocculant Amphoteric Polyacrylamide

US$ 1500-1700 / Ton
1 Ton  (MOQ)
1. Amphoteric polyacrylamide is used as the latest water treatment agent When treating sewage and tap water on many occasions, anionic polyacrylamide and cationic polyacrylamide are used together to produce a more significant and synergistic effect than one polyacrylamide alone. The performance

White · Granule

Amphoteric Cationic Polyacrylamide Emulsion: Water Treatment Essential

US$ 1500-1700 / Ton
1 Ton  (MOQ)
1. Amphoteric polyacrylamide is used as the latest water treatment agent When treating sewage and tap water on many occasions, anionic polyacrylamide and cationic polyacrylamide are used together to produce a more significant and synergistic effect than one polyacrylamide alone. The performance

Liquid · Demulsifier

Crude Oil Pretreatment Oil Refinery Demulsifiers

US$ 1.5-3 / kg
1 kg  (MOQ)
We are committed to providing innovative solutions for multiple fields such as fuel, refining, petrochemical additives, etc. Welcome customers to send crude oil to us. We can test and match relevant products in the laboratory. Crude Oil Pretreatment/Demulsifiers Additives used in refinery pr
Haven't found what you want?

Easy Sourcing

Post sourcing requests and get quotations quickly.

Product Alert

Subscribe to product alert and stay updated to what's new and popular on the market.